AQ 2013.2-2008 in English

1 Scope

This standard specifies the technical requirements of metal and nonmetal underground mines (including mines of accompanying radon and its daughters) on under-well local ventilation in safety assessment, design, construction and exploitation process.

This standard is applicable to safety assessment, design, construction and exploitation of metal and nonmetal underground mines (including mines of accompanying radon and its daughters). It is also applicable to the part of deep open-pit mine which is exploited by adopting underground shaft and drift.

This standard is not applicable to the exploitation of radioactive mineral resources, coal, mine coal-derived pyrite and other paragenetic mineral resources of coal.

This standard is not applicable to the exploitation of mineral resources in liquid or gas state like petroleum, natural gas, mineral water, etc.

2 Normative References

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.

GB 16423 Safety Regulations for Metal and Nonmetal Mines
GB 4792 Basic Standards for Radiological Sanitation Protection
GB 87 Specifications for the Design of Noise Control System in Industrial Enterprises
GB 50215 Specifications for the Design of Mine in Coal Industry
YSJ 019 Specifications for the Design of Non-ferrous Metal Mining

3 Terms and Definitions

For the purpose of this standard, the following terms and definitions apply.

3.1

metal and nonmetal underground mines

stope and its ancillary facilities taking footrill, inclined shaft, slope ramp, shaft, etc. as entrance/exit, which is deeply below the surface and used for the exploitation of metal or nonmetallic minerals used for architecture industry, industry or processing industry

3.2

mine local ventilation

the method of ventilating the under-well blind drift by making use of the wind pressure generated by local ventilator or main ventilator

Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Local Ventilation