GA 366-2001 in English

1 Scope

This standard specifies the basic technical requirements for installation, acceptance and service of vehicle security alarm equipment, proposes the requirements for installation unit and installer as well as corresponding management work, and is a basis for guiding the installation, service and quality inspection.

This standard is applicable to the installation and service of delivered vehicle security alarm equipment (hereinafter referred to as equipment, including electronic, mechanical, electromechanical equipment and the like).

2 Normative References

The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.

GB 10408.2-2000 Detectors for Intruder Alarm Systems—Part 2: Ultrasonic Doppler Detectors for Use in Buildings (idt IEC 60839-2-4)
GB 10408.3-2000 Detectors for Intruder Alarm Systems—Part 3: Microwave Doppler Detectors for Use in Buildings (idt IEC 60839-2-5)
GB 10408.4-2000 Detectors for Intruder Alarm Systems—Part 4: Active Infrared Intrusion Detectors (neq IEC 60839-2-3)
GB 15209-1994 Magnetic Switch Intrusion Detectors
GB 15740-1995 Motor Vehicle—Protective Devices against Unauthorized Use—Performance Requirements
GA 2-1999 Vehicle Security Alarm Systems—Passenger Cars (mod IEC 839-1-10)
Directive No. 12 of the State Bureau of Quality and Technical Supervision and the Ministry of Public Security of PRC Measures on the Management of Security and Technology Protection Equipment

Foreword i
1 Scope
2 Normative References
3 Basic Requirements for Installation
4 Installation Quality and Technical Requirements
5 Strengthening of Protective Measures against Destruction and Technical Attack
6 Installation
7 Documentation
8 Requirements for Marking
9 Inspection and Acceptance
Annex A (Informative) Vehicle Security Alarm Equipment Regulation for Installation Enterprises
Annex B (Informative) Equipment Installation List (Format)