GB 50060-2008 in English

1.0.1 This code is formulated with a view to make the design of high voltage electrical installation (short for electrical installation) (3~110kV) be safe, economic feasibility, easy access and maintenance and state-of-art technology.
1.0.2 This code is applicable to the designs of construction and extension of high voltage electrical installation project (3~110kV).
1.0.3 As for the design of electrical installation, the equipment shall be adopted and the disposal project shall be established according to the requirements of power load property, capacity, environmental condition and operation, setting, maintenance. The electric installation and material which provided with high efficiency and low energy consumption shall be adopted when the technical economy is logical.
1.0.4 The conjugation of long term and near term is required for the design of electrical installation according to the project character, scale and development planning, and it is required to give priority to the near term, at the same time, the room for extension shall be reserved befittingly.
1.0.5 The principle of optimal land utilization must be adopted in the design of electrical installation.
1.0.6 Not only the requirements stipulated in this code, but also those in the current relevant ones of the nation shall be complied with in the design of electrical installation.

1 General Provisions
2 General Requirements
3 Environmental Conditions
4 Selections of Conductor and Electric Appliance
4.1 General Requirement
4.2 Selection of Conductor
4.3 Selection of Electric Appliance
5 Electrical Installation
5.1 Security Clear Distance in Electrical Installation
5.2 Type Selection of Electrical Installation
5.3 Disposal of Electrical Installation
5.4 Channel and shed in Electrical Installation
5.5 Fire Prevention and Oil-storage Facilities
6 GIS Electrical Installation
7 Requirements of Electrical Installation to Building and Structures
7.1 Requirements of Indoor Electrical Installation to Building
7.2 Requirements of Structures on Outdoor Electrical Installation
7.3 Requirement of Building on Indoor GIS Electrical Installation
Annex A Allowable long-term current-carrying capacity of rectangular aluminum conductor
Annex B Grading standards of line and filth of power plant and transformer substation
Wording Explanations