GB/T 13277.1-2023 in English

《GB/T 13277.1-2023压缩空气 第1部分：污染物净化等级》由TC145（全国压缩机标准化技术委员会）归口，TC145SC1（全国压缩机标准化技术委员会压缩气体净化设备分会）执行，主管部门为中国机械工业联合会。

GB/T 13277.1-2023 Compressed air - Part 1: Contaminants and purity classes

1 Scope

This document specifies the purity classes of compressed air with respect to particles, water and oil and the description method of viable microorganisms and gaseous pollutants.

This document is applicable to the purity classification and description of pollutants in compressed air.

Note: The purity classes of contaminants specified in this document is independent of the location in the compressed air system at which the air is specified or measured. This document provides general information about contaminants in compressed air systems as well as links to the other parts of GB/T 13277, either for the requirements of compressed air purity classes or its measurement methods. Guidance is given in Annex A as to the application of this document.

2 Normative references

The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 10893.1 Compressed air dryers - Part 1: Specifications and testing (GB/T 10893.1-2012, ISO 7183: 2007, MOD)
GB/T 13277.2 Compressed air - Part 2: Test methods for oil aerosol content (GB/T 13277.2-2015, ISO 8573-2: 2007, MOD)
GB/T 13277.3 Compressed air - Part 3: Test methods for measurement of humidity (GB/T 13277.3-2015, ISO 8573-3: 1999, MOD)
GB/T 13277.4 Compressed air - Part 4: Test methods for solid particle content (GB/T 13277.4-2015, ISO 8573-4: 2001, MOD)
GB/T 13277.5 Compressed air - Part 5: Test methods for oil vapour and organic solvent content (GB/T 13277.5-2019, ISO 8573-5: 2001, MOD)
GB/T 13277.6 Compressed air - Part 6: Test methods for gaseous contaminant content (GB/T 13277.6-2021, ISO 8573-6: 2003, MOD)
GB/T 13277.7 Compressed air - Part 7: Test method for viable microbiological contaminant content (GB/T 13277.7-2021, ISO 8573-7: 2003, MOD)
JB/T 7664 Compressed air treatment - Vocabulary
ISO 8573-8 Compressed air - Part 8: Test methods for solid particle content by mass concentration
ISO 8573-9 Compressed air - Part 9: Test methods for liquid water content

3 Terms and definitions

For the purposes of this document, the terms and definitions given in GB/T 10893.1, GB/T 13277.7, JB/T 7664 as well as the following apply.

3.1
lubricant/coolant
fluid used to remove heat and reduce friction in a compressor

Foreword i
Introduction iii
1 Scope
2 Normative references
3 Terms and definitions
4 Standard state
5 Compressed air purity classes
6 Designation of purity classes
Annex A (Informative) Guidance
Bibliography
Table 1 Compressed air purity classes for particles
Table 2 Compressed air purity classes for humidity and liquid water
Table 3 Compressed air purity classes for total oil