GB/T 13823.3-1992 in English

SUPERSEDED

Methods for the calibration of vibration and shock pick－ups Comparison(secondary vibration)calibration by sinusoidal excitation

Issued on:1992-01-01
Implemented on:1993-10-01
File Format:PDF
Delivery:Via email within 1~3 business days

Price(USD)： $100.00
$97.00

Standard No:	GB/T 13823.3-1992
Document status:	SUPERSEDED
Superseded by:	GB/T 20485.21-2007 Methods for the calibration of vibration and shock transducers—Part 21:Vibration calibration by comparison to a reference transducer
Superseded on:	2007-12-01
Title in English:	Methods for the calibration of vibration and shock pick－ups Comparison(secondary vibration)calibration by sinusoidal excitation
Title in Chinese:	振动与冲击传感器的校准方法正弦激励比较法校准(二次校准)
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 1~3 business days
Issued on:	1992-01-01
Implemented on:	1993-10-01
ICS Classification:	17.160-Vibrations, shock and vibration measurements
Chinese Classification:	A53-Mechanics Measurement
Professional Classification:	GB-National Standard
Related Keywords:	secondary vibration calibration secondary vibration vibration frequency shock pick－ups comparison shock sensors
Related Topics:	shock sensor xps correction xps correction Pyrene correction Standard Curve Calibration Standard Curve Calibration Standard Vibration Calibration xps calibration method calibration standard curve Calibration of standard curve Chlorine calibration method Calibration and Calibration calibration standard curve Calibration and Correction Calibration method of vibration and shock sensor Earth gravity method calibration xps calibration method Calibration Calibration correction pH two-point calibration method standard addition correction Correction of the equation Vibration and Shock Cross Calibration Set Calibration Set Calibration Curve Recalibration correction of xps Inspection and Correction XPS correction method iec+ correction method multiple test correction Correction method for multiple testing Methods for Multiple Testing Correction Calibration of special gauges Vibration Calibration Equipment Indium correction College visits How to calibrate XPS general calibration Calibration method xps correction. one-time standard addition method xps internal correction xps correction method shock sensor flow calibration method Correction inductance Two to the 10,000,000th power Light Sensitivity Calibration Factor How to correct polarization UV Laser Correction Automatic two-point calibration Two to the 1,000,000th power ph calibration calibration Calibration preparation method Standard Addition Calibration Calibration and Correction Calibration and Calibration Calibration Calibration and Scaling Universal Correction Vibration method 1 and method 2 Vibration Test Standards and Methods Calibration content calibrator instrument Calibration correction Data correction method Suburban Instrument Calibration Methods Jingshan Instrument Calibration Method Southern Instrument Calibration Method The role of calibration Two to the 50,000th power Laser Alignment Instrument Calibration Method Two to the 5,000,000th power Calibration axis Urban Instrument Calibration Methods Two to the 500,000,000th power Two to the 36,000,000,000th power GB/T 13823.3 GB/T 13823.3-1992 Calibration standard solution Thunder magnet phb-4 meter calibration method The difference between calibration and calibration DSC TGA Calibration Internal Calibration Balance Calibration SOP xrf correction Liu Zhentian local university Smoke sensor cannot be calibrated Spline calibration Calibration method of corn weigher Vibrating wire strain sensor calibration The difference between calibration and verification Calibration of dynamic (vibration) acquisition equipment Pipette Calibration Longteng Electronics scale calibration method Power sensor calibration Vibrating Wire Strain Gauge Calibration Sincosine encoder debugging method Water Oxygen Sensor Calibration Calibration of electromagnetic vibration testing machine Hydrogen sensor calibration standard Biosensor Analyzer Linear Calibration Method Calibration method of height difference of level instrument secondary Thermal expansion sensor calibration Multi-component force sensor calibration Riken Special Gas Calibration Method Shock type standard vibrating screen machine calibration Burette calibration method Mass Spectrometry Calibration Method Heat flow sensor dynamic calibration Vibrating screen calibration Multiple calibration methods Standard curve single point correction method Method steps of two-point calibration method Calibration method of shock type standard vibrating screen machine Processor Calibration Homogenizer calibration Standard curve calibration method Inspection and calibration methods of level Balance calibration method Lilac calibration method Baoding Mechanics Calibration Method Lightning strike counter calibration Calibration method of weighing machine Vibration Pressure Gauge Calibration Three-dimensional calibration Calibrator industry Commonly used methods to calibrate heat flow sensors Calibration method of acoustic calibrator Lightning strike counter calibrator calibration Fluorescence crosstalk correction method Viscosity sensor calibration Divider calibration Vibrating Wire Strain Gauge Calibration Calibration method of weighing machine Two-dimensional calibration Methane sensor calibration method Pipette Calibration Method How to calibrate the standard curve Calibration method of wheat weighing machine Biosensor calibration Salinity sensor calibration

《GB/T 13823.3-1992振动与冲击传感器的校准方法正弦激励比较法校准（二次校准）》由TC53（全国机械振动、冲击与状态监测标准化技术委员会）归口，主管部门为国家标准化管理委员会。
本标准规定了振动与冲击传感器二次振动校准的基本要求、所使用的仪器设备及操作方法。本标准适用于直线运动型工作传感器，其适用范围如下：频率范围：20～5000Hz。动态范围(视振动频率而定)：位移：0.1μm~10mm；速度：1mm/s~10m/s；加速度：10~1000m/s2。误差限：对于位移和速度传感器：(20~1000Hz)为读数的±4%；对于加速度传感器：(20~1000Hz)为读数的±2%，(20～2000Hz)为读数的±3%，(20～5000Hz)为读数的±5%。

Scope

This standard specifies the basic requirements for the secondary vibration calibration of vibration and shock sensors, the instruments and equipment used and the operation methods. This standard applies to linear motion sensors, and its scope of application is as follows: Frequency range: 20~5000Hz. Dynamic range (depending on vibration frequency): Displacement: 0.1μm～10mm; Speed: 1mm/s～10m/s; Acceleration: 10～1000m/s². Error limit: For displacement and speed sensors: (20~1000Hz) is ±4% of reading; For acceleration sensors: (20~1000Hz) is ±2% of reading, (20~2000Hz) is ±3% of reading, ( 20～5000Hz) is ±5% of the reading.

More samples: DL/T 368-2010 JGJ 94-2008 NB/T 47013.2-2015

Sample only — not a preview of GB/T 13823.3-1992