GB/T 17462-1998 in English
VALIDMetallic coatings - Electroplated coatings of tin-nickel alloys
- Issued on:1998-08-12
- Implemented on:1999-07-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$127.00
《GB/T 17462-1998金属覆盖层 锡-镍合金电镀层》由TC57(全国金属与非金属覆盖层标准化技术委员会)归口,主管部门为中国机械工业联合会。
本标准规定了由约为65%(质量比)锡和30%(质量比)的镍所组成的金属间化合物锡-镍合金电镀层的技术要求和试验方法。本标准适用于钢铁及其他金属制品上的锡-镍合金电镀层,该电镀层在不同的使用条件下能防止基体金属腐蚀。
Scope
This standard specifies the technical requirements and test methods for the intermetallic tin-nickel alloy electroplating layer composed of about 65% (mass ratio) tin and 30% (mass ratio) nickel. This standard applies to tin-nickel alloy electroplating coatings on steel and other metal products, which can prevent base metal corrosion under different service conditions. This standard does not apply to: Tin-nickel alloy coatings on threaded parts. Tin-nickel alloy coatings on unformed plates, strips or wires, or on parts formed from them; tin-nickel alloy coatings on spring coils; tensile strength greater than 1 000 MPa ( or corresponding hardness) tin-nickel alloy coating on steel, because this steel is prone to hydrogen embrittlement after electroplating (see 8.2); it is mainly used as a tin-nickel alloy thin surface coating to change the surface tone of the part and give the part a decorative appearance.

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/T 19822-2024 in English
Specification for hard anodic oxidation coatings on aluminium and its alloys
2024-06-29 -

GB/T 9789-2008 in English
Metallic and other non-organic coatings—Sulfur dioxide test with general condensation of moisture
2008-06-19 -

GB 9800-1988 in English
Chromate conversion coatings on electroplated zinc and cadmium coatings
1988-09-05 -

GB/T 39807-2021 in English
Process specifications of Pb-free plating tin and tin alloys
2021-03-09 -

GB/T 34625-2017 in English
Metallic and other inorganic coatings-Electrodeposited gold and gold alloy coatings for electrical,electronic and engineering purposes-Specification and test methods
2017-10-14 -

GB/T 24916-2010 in English
Surface treatment solution—Determination of metal element contents—Inductively coupled plasma atomic emission spectrometric method
2010-08-09