Sign In |Help & Support
ALL SECTORS
  • ALL SECTORS
  • GB(National Standard)
  • CB(Shipping)
  • CECS(Engineering Construction)
  • CJ(Urban Construction)
  • CY(News and Publication)
  • DB(Provincial Standard)
  • DL(Electricity & Power)
  • DZ(Geology & Mineralogy)
  • FZ(Spinning & Textile)
  • GA(Public Security)
  • HB(Aviation)
  • HG(Chemical Industry)
  • HJ(Environmental Protection)
  • JB(Machinery)
  • JC(Building Materials)
  • JG(Building & Construction)
  • JJ(Metering)
  • JT(Highway & Transportation)
  • LY(Forestry)
  • MT(Coal)
  • NB(Energy)
  • NY(Agriculture)
  • QB(Light Industry)
  • QC(Automobile & Vehicle)
  • QJ(Aerospace)
  • SH(Petrochemical)
  • SJ(Electronics)
  • SL(Water Resources)
  • SN(Commodity Inspection)
  • SY(Oil & Gas)
  • TB(Railway & Train)
  • YB(Ferrous Metallurgy)
  • YC(Tobacco)
  • YD(Telecommunication)
  • YY(Medical Device)
Database: 365,228(8 Aug 2026)
substations scopethis standard prefabricated substation general structural requirements substation fail external acoustic pre-assembler non-destructive testing symbols logistic information service traceability accuracy
GB/T 17467-1998 in English

GB/T 17467-1998 in English

SUPERSEDED

High-voltage/low-voltage prefabricated substations

  • Issued on:1998-08-01
  • Implemented on:1999-09-01
  • File Format:PDF
  • Delivery:Via email within 5 business days
Price(USD): $430.00
$418.00
Standard No: GB/T 17467-1998
Document status: SUPERSEDED
Superseded by: GB/T 17467-2010 High-voltage/low-voltage prefabricated substation
Superseded on: 2011-08-01
Title in English: High-voltage/low-voltage prefabricated substations
Title in Chinese: 高压/低压预装式变电站
Language: English
File Format: Electronic (PDF)
Delivery: Via email within 5 business days
Issued on: 1998-08-01
Implemented on: 1999-09-01
ICS Classification: 29.240.10-Substations. Surge arresters
Chinese Classification: K43-High voltage switchgear
Professional Classification: GB-National Standard
Related Keywords: substations scopethis standard
prefabricated substation
general structural requirements
substation fail
external acoustic pre-assembler
Related Topics: substation
power station
High pressure and low pressure
low pressure high pressure
Why high voltage and low current
One-stop electronic altimeter
High altitude low pressure test
low voltage high current
High pressure and low pressure iec
gb/t17467
Prefabricated substation
GB/T17467-2010
GB/T 17467-2010
Substation Station + Boundary
substation
High voltage and low voltage prefabricated substation
GB17467
prefabricated
High voltage and low voltage prefabricated substation
high pressure
flow tube high pressure
low voltage and high voltage
GB/T 17467-1998
GB/t+17467
Pre-electrophoresis voltage
electronic high altitude low pressure
High voltage/low voltage prefabricated substation
Low voltage transformer installation
gb low voltage
GBT17467
GB/T 17467-1998
GB/T 17467-2010
GB/T 17467-2020
High voltage distribution station
gb50268-2018 substation
Liquid phase peak height becomes lower
Prefabricated and combined substation dry-type transformer installation
Prefabricated substation abroad
Maximum capacity of prefabricated substation
Prefabricated cabin substation
gb/t 17467-2020
gb/t17467-2020
gbt17467-2020
gb/t17467-1998
gb 17467

《GB/T 17467-1998高压/低压预装式变电站》由TC65(全国高压开关设备标准化技术委员会)归口,主管部门为中国电器工业协会。
本标准规定了一次侧交额定电压3.6~40.5kV、变压器最大容量是1 600kVA、工作频率不大于50Hz的公众能接近的户外预装式变电站的使用条件、额定参数、一般结构要求和试验方法。该变电站是通过电缆连接的,可以从它的内部或外部进行操作。


Scope

This standard stipulates the primary-side AC rated voltage 3.6 ~ 40.5kV [1], the maximum capacity of the transformer is 1600kVA, and the working frequency is not more than 50Hz 2], which can be connected to the external acoustic pre-assembler The conditions of use, rated parameters, general structural requirements and test methods of the substation fail. The substation is cabled and can be operated from inside or outside it. The prefabricated substation can be installed on the ground or partly or completely under the ground. As there are no basic generally accepted national standards 3] IEC or ISO standards available for aging or corrosion, this standard does not cover requirements for these aspects 2) 4]

Sample only — not a preview of GB/T 17467-1998
Page: 1 / 0
100%

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend

  • GB/T 24836-2018 in English

    GB/T 24836-2018 in English

    1 100 kV gas-insulated metal-enclosed switchgear

    2018-07-13
  • GB/T 33977-2017 in English

    GB/T 33977-2017 in English

    Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations

    2017-07-12