GB/T 18375.3-2001 in English

《GB/T 18375.3-2001假肢 下肢假肢的结构检验 第3部分:主结构检验》由TC148（全国残疾人康复和专用设备标准化技术委员会）归口，主管部门为民政部。
GB/T18375描述了下肢假肢的静态和动态试验过程。在这个过程中，除了特殊情况，都是用一个试验力产生复合的试验载荷。在试验样品上的复合载荷取决于载荷各个分力的峰值，这些峰值通常发生在行走过程中支撑相时的不同瞬间。GB/T18375描述的检验方法适用于小腿(BK)假肢、膝离断假肢和大腿(AK)假肢。GB/T18375的本部分规定――用于主结构静态试验的方法;――用于主结构动态试验的方法;――对试验精度的要求;――通过GB/T18375本部分试验的判。

Scope

GB/T 18375 describes the static and dynamic test procedures for lower limb prostheses. In this process, except for special cases, a test force is used to generate a composite test load. The compound load on the test specimen depends on the peak values of the individual components of the load, which usually occur at different instants during the stance phase during walking. The testing method described in GB/T 18375 is applicable to lower leg (BK) prostheses, knee amputated prostheses and thigh (AK) prostheses. Note: The inspection can be carried out on the whole structure, part of the structure or a single component. This part of GB/T 18375 stipulates - the method used for the static test of the main structure; - the method used for the dynamic test of the main structure; - the requirements for the test accuracy; but.