GB/T 20673-2006 in English

VALID

Cellular plastics - Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures

Issued on:2006-09-18
Implemented on:2007-05-01
File Format:PDF
Delivery:Via email within 1~3 business days

Price(USD)： $200.00
$194.00

Standard No:	GB/T 20673-2006
Document status:	VALID
Title in English:	Cellular plastics - Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
Title in Chinese:	硬质泡沫塑料低于环境温度的线膨胀系数的测定
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 1~3 business days
Issued on:	2006-09-18
Implemented on:	2007-05-01
ICS Classification:	83.100-Cellular materials
Chinese Classification:	G32-Synthetic resin and plastic
Professional Classification:	GB-National Standard
Related Keywords:	rigid foam plastics linear thermal expansion linear expansion cellular plastics sub-ambient temperatures scopethis standard
Related Topics:	Styrofoam Coefficient of expansion Linear expansion coefficient reduce ambient temperature cryo-mass spectrometry What is the coefficient of linear expansion? Linear expansion coefficient a1 temperature expansion coefficient Linear expansion coefficient How to use linear expansion coefficient Linear Expansion Coefficient Standard Expansion coefficient temperature range coefficient of expansion Coefficient of linear expansion rigid foam The coefficient of linear expansion of rhodium GBT20673 GB/T 20673-2006 Determination of oxide linear expansion coefficient Linear expansion coefficient detection Linear expansion coefficient detection Determination of linear expansion coefficient

《GB/T 20673-2006硬质泡沫塑料低于环境温度的线膨胀系数的测定》由TC48（全国塑料制品标准化技术委员会）归口，主管部门为中国轻工业联合会。
本标准规定了测定硬质泡沫塑料低于环境温度的线膨胀系数的方法。本标准适用于测定硬质泡沫塑料在选定低温与环境温度之间的平均线膨胀系数。

Scope

This standard specifies the method for determining the coefficient of linear expansion of rigid foamed plastics below ambient temperature. This standard applies to the determination of the "average" coefficient of linear expansion of rigid foamed plastics between selected low temperatures and ambient temperatures. The coefficient of linear expansion measured by this standard is only valid for the specific sample tested within the test time. Rigid foam plastics are anisotropic, and the results obtained from tests in different directions are not comparable.

More samples: GB 50021-2001(2009) JGJ 94-2008 NB/T 47013.2-2015

Sample only — not a preview of GB/T 20673-2006

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend

GB/T 12811-2025 in English

Test method for average cell size of rigid cellular plastics
2025-10-31
GB/T 10801.1-2025 in English

Moulded polystyrene foam（EPS）for thermal insulation
2025-12-31
GB/T 20219-2015 in English

Rigid cellular plastics-spray-applied polyurethane foam for thermal insulation
2015-06-02
GB/T 6343-2009 in English

Cellular plastics and rubbers - Determination of apparent density
2009-05-04
GB/T 40363-2021 in English

Rigid polyurethane cellular materials used for refrigerated containers and refrigerated trailers
2021-08-20
GB/T 33609-2017 in English

Flexible cellular polymeric materials -- Determination of hysteresis loss
2017-05-12
GB/T 39936-2021 in English

Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods
2021-03-09