GB/T 23600-2009 in English

《GB/T 23600-2009镁合金铸件X射线实时成像检测方法》由TC243（全国有色金属标准化技术委员会）归口，TC243SC1（全国有色金属标准化技术委员会轻金属分会）执行，主管部门为中国有色金属工业协会。
本标准规定了镁合金铸件X 射线实时成像无损检测方法。但未规定铸件内部不均匀性的可接受准则。
本标准适用于对镁合金铸件内部不均匀性的种类和严重程度进行实时无损检测。

1 Scope

This Standard specifies X-ray real-time radioscopic non-destructive testing method for magnesium alloy casting, but does not specify the acceptable criteria of the internal nonuniformity in the casting.
This Standard is applicable to the real-time non-destructive testing on the categories and severity of the internal nonuniformity in the magnesium alloy castings.

2 Normative References

The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.

Foreword I
1 Scope
2 Normative References
3 Methods and Principles
4 Terms and Definitions
5 Personnel Requirements
6 Equipments
7 Testing Method
8 Treatment of Test Results