GB/T 24186-2009 in English

《GB/T 24186-2009工程机械用高强度耐磨钢板》由TC183（全国钢标准化技术委员会）归口，主管部门为中国钢铁工业协会。
本标准规定了工程机械用高强度耐磨钢板的牌号、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书。
本标准适用于矿山、建筑、农业等工程机械耐磨损结构部件用厚度不大于80 mm 的钢板。本标准规定的耐磨钢板也适用于其他领域。

1. Scope
This national standard specifies designation, size, appearance, weight and allowable deviation, technical requirements, test method, test rules, packaging, mark and quality certificate of high strength abrasion resistant steel plates for construction machine.
This standard is applicable to steel plates, which the thickness is not larger than 80mm and used for abrasion resistant structural component of construction machine (mining area, construction, agriculture, etc.). The abrasion resistant steel plate this standard specifies are also applicable in other fields.
2. Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this national standard. For dated reference, subsequent amendments (excluding amending error in the text) to, or revisions of, any of these publications do not apply. However, the parties whose enter into agreement according to these specifications are encouraged to research whether the latest editions of these references are applied or not. For undated references, the latest edition of the normative document is applicable to this national standard.
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223.3 Methods for chemical analysis of iron, steel and alloy - The diantipyrylmethane phosphomolybdate gravimetric method for the determination of phosphorus content
GB/T 223.9 Iron steel and alloy - Determination of aluminium content - Chrom azurol S photometric method
GB/T 223.11 Iron steel and alloy - Determination of chromium content - Visual titration or potentiometric titration method
GB/T 223.12 Methods for chemical analysis of iron, steel and alloy - The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
GB/T 223.13 Methods for chemical analysis of iron, steel and alloy－ The ammonium ferrous sulfate titration method for the determination of vanadium content
GB/T 223.14 Methods for chemical analysis of iron, steel and alloy－ The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
GB/T 223.17 Methods for chemical analysis of iron steel and alloy - The diantipyrylmethane photometric method for the determination of titanium content
GB/T 223.23 Iron steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method
GB/T 223.26 Iron steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method
GB/T 223.54 Methods for chemical analysis of iron, steel and alloy - The flame atomic absorption spectrophotometric method for the determination of nickel content
GB/T 223.58 Methods for chemical analysis of iron, steel and alloy - The sodium arsenite-sodium nitrite titrimetric method for the determination of manganese content
GB/T 223.59 Methods for chemical analysis of iron, steel and alloy - The reduced molybdoantimonyl phosphoric acid photometric method for the determination of phosphorus content
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.61 Methods for chemical analysis of iron, steel and alloy - The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy - The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.63 Methods for chemical analysis of iron, steel and alloy - The sodium(potassium) periodate photometric method for the determination of manganese content
GB/T 223.64 Iron steel and alloyed - Determination of manganese content - Flame atomic absorption spectrometric method
GB/T 223.67 Iron steel and alloy - Determination of sulfur content - Methylene blue spectrophotometric method
GB/T 223.68 Methods for chemical analysis of iron, steel and alloy - The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
GB/T GB/T223.69 Iron steel and alloy - Determination of carbon contents - Gas-volumetric method after combustion in the pipe furnace
GB/T 223.71 Methods for chemical analysis of iron, steel and alloy - The gravimetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.72 Iron steel and alloy - Determination of sulfur content - Gravimetric method
GB/T 223.75 Iron steel and alloy - Determination of boron content - Methanol distillation-curcumin photometric method
GB/T 223.76 Methods for chemical analysis of iron, steel and alloy - The flame atomic absorption spectrometric method for the determination of vanadium content
GB/T 223.78 Methods for chemical analysis of iron, steel and alloy - Curcumin spectrophotometric method for the determination of boron content
GB/T 228 -2008 Metallic materials - Tensile testing at ambient temperature (GB/T 228- 2002, eqv ISO 6892: 1998)
GB/T 229 Metallic Materials - Charpy Pendulum Impact Test Method (GB/T 229-2007, ISO 148-1: 2006, MOD)
GB/T 231.1 Metallic materials- Brinell hardness test - Part 1: Test method (GB/T 231.1-2009, ISO 6506-1: 2005, MOD)
GB/T 247 General Rule of Acceptance, Package, Mark and Certification for Steel Plates (Sheets) and Strips
GB/T 709 Dimension, shape, weight and tolerances for hot-rolled steel plates and sheets
GB/T 2975 Mechanical Test Sampling Location and Sample Preparation for Steel and Steel Products (GB/T 2975-1998, eqv ISO 377: 1997)
GB/T 4336 Standard test method for spark discharge atomic emission spectrometric analysis of carbon and low-Alloy steel (routine method))
GB/T 17505 Steel and steel products General technical delivery requirements (GB/T 17505-1998, eqv ISO 404: 1992)
GB/T 20066 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (GB/T 20066-2006, ISO 14284: 1996, IDT)
YB/T 081 Rule for rounding off of numerical values and judgment of testing values for technical standards of metallurgy
3 Order content
Placing order, party shall provide the following information:
a) Code name of this standard;
b) Product name;
c) Designation;
d) Dimension;
e) Condition of delivery;
f) Weight;
g) Other special requirements.