GB/T 26701-2011 in English

《GB/T 26701-2011模型产品通用技术要求》由TC253（全国玩具标准化技术委员会）归口，主管部门为中国轻工业联合会。

1 Scope

This Standard specifies terms and definitions, technical requirements, test methods, defect classification and acceptance judgment principle of model products.
This Standard is applicable to model products whose working voltage is less than or equal to 36V or uncharged model products that are intended for over-14-year teenagers and adults to collect, play or use, including static or dynamic aerospace model, marine model and vehicle model etc.
Additional requirements for collection model products are given in Appendix A (normative).
This Standard is not applicable to the following products:
- Special competition model;
- Non-commercial model products;
- Internal-combustion-engine-driven model products;
- Kites.
Note: transformer and battery charger are not considered as models, even though they are provided together with models.

2 Normative References

The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigendum) or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this Standard are encouraged to study whether the latest editions of these documents apply. For undated reference, the latest edition of the normative documents referred to applies.
GB 6675 National Safety Technical Code for Toys
GB/T 9286-1998 Paints and Varnishes - Cross Cut Test for Films
GB 19865-2005 Electric Toys - Safety
Regulations of the People's Republic of China on the Management of Radio Operation [1993] issued by the State Council and the Central Military Commission
Technical Requirements for Micropower (Short-distance) Radio Equipment [2005] issued by the Ministry of Information Industry

3 Terms and Definitions

1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Requirements
4.1 Safety Requirements
4.2 Performance Requirements
4.3 Appearance Requirements
4.4 Mark and Description
5 Testing Methods
5.1 Safety Inspection
5.2 Performance Inspection
6 Defect Classification
7 Acceptance Judgment Principle for Type Test
7.1 Application Conditions of Type Test
7.2 Acceptance Judgment Principle
Appendix A (Normative) Collection Model
Appendix B (Informative) Radio Remote Control of Remote Control Model
Appendix C (Informative) Specification for Laser Radiation Warning Mark and Description Mark