GB/T 2822-1981 in English
SUPERSEDEDStandard linear dimensions
- Issued on:1981-01-02
- Implemented on:1982-10-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$97.00
《GB/T 2822-1981标准尺寸》。
本标准规定0.01~20000mm范围内机械制造业中常用的标准尺寸(直径、长度、高度等)系列，适用于有互换性或系列化要求的主要尺寸(如安装、连接尺寸，有公差要求的配合尺寸，决定产品系列的公称尺寸等)。其它结构尺寸也应尽量采用。对于由主要尺寸导出的因变量尺寸和工艺上工序间的尺寸，不受本标准限制。对已有专用标准规定的尺寸，可按专用标准选用。
Scope
This standard specifies the series of standard dimensions (diameter, length, height, etc.) commonly used in the machinery manufacturing industry within the range of 0.01 to 20000mm, and is suitable for major dimensions (such as installation and connection dimensions, tolerance requirements) that require interchangeability or serialization. fit size, determine the nominal size of the product series, etc.). Other structural dimensions should also be used as much as possible.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 2822-2005 in English
Standard linear dimensions
2005-05-16 -
GB/T 321-2005 in English
Preferred numbers -Series of preferred numbers
2005-05-16
