GB/T 28279.1-2012 in English

VALID

Plain bearing—Hydrostatic plain journal bearings with drainage grooves under steady-state conditions—Part 1:Calculation of oil-lubricated plain journal bearings with drainage grooves

Issued on:2012-05-11
Implemented on:2012-12-01
File Format:PDF
Delivery:Via email within 1~3 business days

Price(USD)： $450.00
$437.00

Standard No:	GB/T 28279.1-2012
Document status:	VALID
Title in English:	Plain bearing—Hydrostatic plain journal bearings with drainage grooves under steady-state conditions—Part 1:Calculation of oil-lubricated plain journal bearings with drainage grooves
Title in Chinese:	滑动轴承稳态条件下带回油槽流体静压径向滑动轴承第1部分：带回油槽油润滑径向滑动轴承的计算
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 1~3 business days
Issued on:	2012-05-11
Implemented on:	2012-12-01
ICS Classification:	21.100.10-Plain bearings
Chinese Classification:	J12-Sliding bearing
Professional Classification:	GB-National Standard
Related Keywords:	oil-lubricated hydrostatic radial plain bearings hydrostatic radial plain bearings drainage grooves scopethis part oil return grooves drainage grooves
Related Topics:	oil tank Reflux ratio below 1 Industrial Lubricant Recovery GB/T 28279.1 Oil tank for lubrication Sliding bearing Shanghai Jiaotong University International standard axial pressure bearing Pulley axial and radial runout standard values Oil grooves and bearings on the shaft Iron content of rolling bearing lubricating oil Bearing grease nipple Clearance standards for grease lubricated sliding bearings

《GB/T 28279.1-2012滑动轴承稳态条件下带回油槽流体静压径向滑动轴承第1部分：带回油槽油润滑径向滑动轴承的计算》由TC236（全国滑动轴承标准化技术委员会）归口，主管部门为中国机械工业联合会。

Scope

This part of GB/T 28279 is used for the calculation of oil-lubricated hydrostatic radial plain bearings with oil return grooves. This section applies to hydrostatic radial plain bearings under steady-state conditions. This part only deals with the lubricating method of bringing back the oil groove between the oil chambers. Compared with hydrostatic radial sliding bearings without oil return grooves, the lubrication method with oil return grooves requires greater oil pump power under the same rigidity.

More samples: GB 50021-2001(2009) JJG 21-2008 GB 18306-2015

Sample only — not a preview of GB/T 28279.1-2012

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend

GB/T 13345-2021 in English

Oil film bearing for flat rolling mill
2021-05-21
GB/T 18325.1-2025 in English

Plain bearings—Bearing fatigue—Part 1:Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication
2025-10-31
GB/T 2889.1-2020 in English

Plain bearings—Terms,definitions,classification and symbols—Part 1:Design,bearing materials and their properties
2020-04-28
GB/T 42613-2023 in English

Plain bearings—Testing of bearing materials—Resistance to corrosion by lubricants under static conditions
2023-05-23
GB/T 47254-2026 in English

Plain bearings—Dynamic adhesion test method for DLC coated parts under lubricated condition
2026-02-27
GB/T 23891.1-2009 in English

Plain bearings—Hydrodynamic plain thrust pad bearings under steady-state conditions—Part 1:Calculation of thrust pad bearings
2009-05-26
GB/T 34633.1-2017 in English

Plain bearings-Pedestal plain bearings-Part 1:Pillow blocks
2017-11-01
GB/T 2688-2012 in English

Plain bearing—Technical specification of powder metallurgy bearing
2012-05-11
GB/T 12613.1-2011 in English

Plain bearings—Wrapped bushes—Part 1:Dimensions
2011-12-30
GB/T 7308.1-2021 in English

Plain bearings—Thin-walled half bearings with or without flange—Part 1：Tolerances, design features and methods of test
2021-03-09