GB/T 32354-2015 in English
VALIDTechnical specification of screw expander(unit)
- Issued on:2015-12-31
- Implemented on:2017-01-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$291.00
《GB/T 32354-2015螺杆膨胀机（组）技术规范》由TC512（全国螺杆膨胀机标准化技术委员会）归口，主管部门为中国电器工业协会。
本标准规定了螺杆膨胀机(组)设备的术语定义、保证值、调节、运行、检修和部件等的要求。
本标准适用于工质温度范围为120℃~300℃、压力不大于3.0MPa、螺杆膨胀机进出口压差不大于1.5MPa的汽水混合物、饱和蒸汽或过热蒸汽的螺杆膨胀机(组)。
对非水工质(如低沸点工质)的有机朗肯循环螺杆膨胀机(组)也可参考使用。
Introduction
1. Standard Overview
GB/T 32354-2015 Technical Specification for Screw Expanders (Groups) is a national standard of the People's Republic of China, mainly applicable to screw expanders (groups) with a working fluid temperature range of 120℃~300℃ and a pressure of no more than 3.0MPa, steam-water mixture, saturated steam or superheated steam. The standard specifies term definitions, guaranteed values, adjustment, operation and maintenance requirements.
2. Standard Framework Comparison
| Chapter | Content | Keywords |
|---|---|---|
| Screw ExpanderTerms and Definitions | Specify types such as back pressure type and condensing type and their application scenarios. | Terms, definitions, classifications |
| Guaranteed values | Specify the guaranteed requirements for performance indicators such as steam consumption rate and rated power. | Performance, guarantee, indicators |
| Regulation and operation | Cover speed regulation, overspeed protection and abnormal operating condition processing. | Regulation, operation, protection |
3. Background of standard formulation and analysis of technological evolution
With the increase in the demand for efficient energy utilization, screw expanders are increasingly used in waste heat recovery systems. This standard combines industry practical experience and refers to international advanced standards to clarify the technical requirements and test methods of the equipment, aiming to regulate the market and promote technological progress.
4. Implementation Suggestions
- Design and selection:Select the appropriate type of screw expander according to the type and parameters of the working fluid, and ensure its compatibility with the auxiliary system.
- Installation and commissioning:Carry out basic design, pipeline connection and instrument layout in strict accordance with standard requirements to ensure safe operation of the system.
- Operation and maintenance:Regularly check the vibration, noise and lubrication system, handle abnormal conditions in a timely manner, and extend the life of the equipment.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 46473-2025 in English
Natural gas screw expander unit
2025-10-31 -
GB/T 35034-2018 in English
Technical specification for safety monitoring devices of screw expander(unit)
2018-05-14
