GB/T 32709-2016 in English
VALIDSafety specifications of laboratory instruments and equipment - Coal industry analyzers
- Issued on:2016-06-14
- Implemented on:2017-01-01
- File Format:PDF
- Delivery:Via email within 5 business days
$728.00
《GB/T 32709-2016实验室仪器及设备安全规范 煤炭工业分析仪》由TC526(全国实验室仪器及设备标准化技术委员会)归口,主管部门为中国机械工业联合会。
Introduction
Interpretation of the core content of the standard
This standard specifies the safety technical requirements for coal industry analyzers in measuring the moisture, ash and volatile matter of coal and coke, and is applicable to laboratory environments with a rated voltage not exceeding 600V.
Key indicators of electrical safety
| Protection type | Electrical clearance (mm) | Creep distance (mm) | Test voltage (AC) |
|---|---|---|---|
| Basic insulation | ≥0.2 | ≥1.0 | 1500V |
| Double insulation | ≥0.4 | ≥2.0 | 3000V |
Note: The minimum electrical clearance under pollution degree 2 is 0.2mm, and high-voltage components must pass the 1.2/50μs pulse voltage test.
Mechanical safety design requirements
Protection of moving parts must meet the following requirements:
- Rotating parts should be equipped with protective covers with an opening size of ≤12mm
- Equipment with a mass of ≥18kg must be equipped with a special handling device
- Static pressure bearing capacity of the shell is 30N, and dynamic impact energy is 5J
Fire prevention and temperature control
Key fire prevention measures:
- Non-metallic shell materials must meet the flame retardant grade of GB/T 11020 FV-1
- Microwave leakage ≤50W/m² (50mm from the surface)
- Touchable surface temperature ≤70℃ (metal)/80℃ (non-metal)
Implementation suggestions
Purchase and acceptance
It is recommended to give priority to products that have passed CNAS certification. During acceptance, the following checks must be checked:
- Protective grounding impedance ≤ 0.1Ω
- Double insulation mark (return symbol)
- Verification of the effectiveness of the safety interlock device
Daily maintenance
Every quarter, the following should be carried out:
- Electrical safety test (insulation resistance ≥ 10MΩ)
- Lubrication check of mechanical parts
- Microwave sealing strip integrity test

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.