GB/T 35168-2017 in English
VALIDRoller press for cement industry
- Issued on:-
- Implemented on:2018-11-01
- File Format:PDF
- Delivery:Within 1 day
$171.00
| Standard No: | GB/T 35168-2017 |
| Document status: | VALID |
| Title in English: | Roller press for cement industry |
| Title in Chinese: | 水泥工业用辊压机 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Within 1 day |
| Implemented on: | 2018-11-01 |
| Chinese Classification: | Q92-Cement and cement product equipment |
| Professional Classification: | GB-National Standard |
| Related Keywords: | roller press
roller press design roller press standard dimensions gb/t cement industry cement industry gb/t |
| Related Topics: | GB/T 35168
GB/T35168-2017 Water roller Industrial Roll Software Industrial Roll Software Three-roll machine front roll middle roll water industry Roller Tablet Press cement industry cement industry cement industry GB/35168 Roll surface pressure Dipping roller GBT35168 GB/T 35168-2017 Four-roller calender process standards |
《GB/T 35168-2017水泥工业用辊压机》由TC465（全国建材装备标准化技术委员会）归口，主管部门为中国建筑材料联合会。
Introduction
Technical Background and Standardization of Roller Press for Cement Industry
GB/T 35168—2017 Roller Press for Cement Industry is a standardization document for roller press in cement industry, which aims to standardize the product terms, models, technical requirements and test methods. The standard was proposed by China Building Materials Federation and managed by the National Technical Committee for Standardization of Building Materials Equipment, which fully reflects the industry's leading technology and practical experience.
Comparison of Standard Frameworks of Roller Press
| Standard Dimensions | GB/T 35168—2017 | International References (such as ISO) | Industry Differences |
|---|---|---|---|
| Term Definitions | Clarify professional terms such as "projected pressure". | Consistent with relevant ISO standards. | Refine in combination with the characteristics of China's cement industry. |
| Models and parameters | Unify the model identification method and clarify the basic parameter range (such as nominal diameter, power, etc.). | Refer to the international general naming rules. | Optimize for special application scenarios of roller presses. |
| Technical requirements | Cover materials, manufacturing processes, safety protection and other aspects. | In line with international standards, such as ISO 630 and ISO 2768 series. | Add special requirements to adapt to China's working conditions. |
Technical key points analysis of roller press
Material selection: Key components of roller press such as rollers and bearing seats must be made of high-performance steel to ensure reliability under high pressure and complex working conditions.
Manufacturing process: Welded parts must meet the JB/T 6396-2006 standard to ensure structural strength and durability. Ultrasonic testing and non-destructive testing are important links in quality control.
Safety protection: The electrical system and hydraulic lubrication system of the equipment must comply with the requirements of GB5226.1 and ISO 14118 to ensure the safety of operators.
Recommendations for the implementation of the standard
- Design stage: This standard should be referred to in the early stage of the roller press design to ensure that all parameters and performance indicators meet the requirements of the specification.
- Manufacturing process: Key components must undergo strict testing, including material inspection, ultrasonic flaw detection and pressure testing.
- Installation and commissioning: After installation, no-load and load test runs should be carried out to ensure that the equipment runs smoothly without abnormal vibration or leakage.
- Maintenance: Regularly check the status of each system of the roller press according to the standard requirements, and replace wear parts and lubrication parts in time.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 32990-2016 in English
Smart perfusion machine for cast-in-situ foam concrete composite wall
2016-10-13 -
GB/T 35150.1-2017 in English
Technical requirements of dry process cement production complete equipment―Part 1:Raw meal preparation system
2017-12-29 -
GB/T 26282-2021 in English
Measuring methods of heat balance of cement rotary kiln
2021-12-31 -
GB/T 27976-2011 in English
Tube mill equipment for cement industry
2011-12-30
