GB/T 35486-2017 in English
VALIDSpecification of spiral-conveyer for logistics warehousing distribution center
- Issued on:2017-12-29
- Implemented on:2018-07-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$156.00
《GB/T 35486-2017物流仓储配送中心螺旋箱式输送机技术规范》由TC499（全国物流仓储设备标准化技术委员会）归口，主管部门为中国机械工业联合会。
Introduction
Interpretation of GB/T 35486-2017 National Standard of the People's Republic of China
Overview of Technical Specifications for Spiral Box Conveyors in Logistics Warehousing and Distribution Centers
This standard specifies in detail the technical requirements, test methods, inspection rules and safety requirements for spiral box conveyors used in logistics warehousing and distribution centers, aiming to ensure the efficient, stable and safe operation of the equipment.
Background of Standard Formulation and Analysis of Technical Evolution
With the development of modern logistics industry, the role of automated conveying systems in warehousing and distribution centers is becoming increasingly important. As an efficient vertical conveying equipment, spiral box conveyors are widely used in the fields of item sorting, storage and handling. However, there are many technical parameters involved in its design, manufacturing and application process, and the performance requirements are complex, so unified technical standards are needed to regulate its production and use.
Technical Requirements Interpretation
| Project | Specific Requirements | Key Parameters |
|---|---|---|
| Working Environment Conditions | - Temperature: -5°C ~ 40°C - Humidity: ≤50% at 40°C, and can be appropriately increased when the temperature is lower, but not more than 85% - Altitude: ≤1000m | Strict environmental adaptability requirements |
| Box Item Requirements | - Single piece mass ≤50kg - Specifications and dimensions: Length 350mm~900mm × Width 150mm~500mm × Height 50mm~500mm - Maximum load capacity: 50kg/m | Standardized load and size limit |
| Main structure design | Complies with GB/T 3811, key components such as sprockets, chains, etc. must meet JB/T7016 requirements | Structural reliability and safety |
Test methods and performance indicators
To ensure that the performance of the conveyor meets the standard requirements, a number of tests are required:
- Visual inspection: Including intuitive inspection of appearance, component status, etc.
- Paint film adhesion test: According to GB/T9286-1998 standard
- Performance test: Including running tests under no-load, rated load and overload conditions, the time is not less than 60 minutes
- Noise measurement: Under full load conditions, the sound pressure level measured 1 meter away from the drive mechanism shall not exceed 85dB(A)
Safety requirements and protective measures
To ensure the safety of equipment operation, the standard specifies the following requirements:
- Electrical safety: Comply with GB5226.1
- Grounding resistance: Not greater than 4Ω
- Insulation resistance: Not less than 1MΩ
- Interlock protection: Including protection functions such as loss of pressure, overcurrent and short circuit
Implementation suggestions and precautions
Selection suggestions: According to the actual logistics needs, select the appropriate spiral box conveyor model and ensure that it meets the technical requirements of GB/T35486.
Installation and commissioning: Strictly follow the instruction manual provided by the manufacturer for installation and complete sufficient commissioning before formal use.
Maintenance: Regularly check the equipment status, including lubrication, cleaning and fastener inspection to ensure long-term stable operation.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 45162.1-2024 in English
Warehouse logistics equipment—Specification for reliability test—Part 1：conveying and sorting equipment
2024-12-31 -
GB/T 28576-2012 in English
Calculation of industrial rack design
2012-06-29 -
GB/T 41514-2022 in English
Standard for safety and evaluation of steel structure racks
2022-07-11
