GB/T 36668.6-2019 in English
VALIDCondition monitoring and fault diagnostics of amusement device—Part 6:Operating parameters monitoring method
- Issued on:2019-12-31
- Implemented on:2019-12-31
- File Format:PDF
- Delivery:Via email within 5 business days
$301.00
《GB/T 36668.6-2019游乐设施状态监测与故障诊断 第6部分：运行参数监测方法》由TC250（全国索道与游乐设施标准化技术委员会）归口，主管部门为国家标准化管理委员会。
Introduction
1. Standard Overview
GB/T 36668.6—2019 specifies the monitoring methods for the operating parameters of amusement facilities, including environmental parameters, electrical parameters, mechanical parameters, and motion parameters. This standard is applicable to the condition monitoring and fault diagnosis of newly manufactured and in-use amusement facilities.
2. Comparison table of standard frameworks
| Standard dimensions | GB/T 36668.6—2019 requirements | Comparative analysis |
|---|---|---|
| Monitoring scope | Environmental parameters (temperature, humidity, wind speed) and operating parameters (electrical, mechanical, motion parameters) | Newly added audio and video parameter monitoring, expanding the data collection dimension. |
| Sensor requirements | Equipped with temperature and humidity sensors, wind speed sensors, and power distribution monitoring sensors, etc. | Emphasis on the compatibility and performance requirements of multiple types of sensors. |
| Communication protocol | Modbus protocol is recommended, supporting RS485 and Ethernet interfaces | Ensure the stability and real-time performance of data transmission. |
3. Technical requirements and implementation suggestions
3.1 Safety requirements
Monitoring personnel should comply with the safety regulations for on-site operation of amusement facilities, especially when operating at high altitudes and in complex environments, and take necessary protective measures. The sensor installation location should avoid affecting the normal operation of the equipment and ensure the accuracy of data collection.
3.2 Personnel configuration
Professional and technical personnel engaged in monitoring need to have relevant knowledge of software, electrical, automation and special equipment maintenance and repair. It is recommended to conduct professional training regularly to ensure that the operation meets the standard requirements.
3.3 Monitoring system installation and debugging
The installation location of data acquisition equipment and sensors should be planned reasonably to avoid signal interference. During online debugging, the performance of the communication interface, analog and digital channels should be checked to ensure the stable operation of the monitoring system.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 24914-2010 in English
Lead-acid battery for garden patrol minibus
2010-08-09 -
GB/T 44512-2024 in English
Inspection and test specifications of large-scale amusement device—Ultrasonic stress testing
2024-09-29 -
GB/T 18159-2019 in English
Specifications of amusement rides coaster category
2019-12-31 -
GB/T 42101-2022 in English
Amusement park safety—General requirments
2022-10-12 -
GB/T 20049-2025 in English
Ride identification number
2025-05-30 -
GB/T 34370.10-2020 in English
Nondestructive testing of amusement equipments—Part 10:Magnetic memory testing
2020-11-19 -
GB/T 39043-2020 in English
Risk assessment for amusement ride—Hazard
2020-07-21
