GB/T 36932-2018 in English

《GB/T 36932-2018家用和类似用途电器安装及布线通用要求》由TC46（全国家用电器标准化技术委员会）归口，TC46SC12（全国家用电器标准化技术委员会家用电器布线及安装分会）执行，主管部门为中国轻工业联合会。

General requirements for installation and wiring of household and similar electrical appliances

1 Scope

This standard specifies terms and definitions, classification, installation requirements, wiring requirements and acceptance requirements for installation and wiring of household and similar electrical appliances (hereinafter referred to as "household electrical appliances").

This standard is applicable to household electrical appliances to be installed and wired.

Note: There may be additional installation and wiring requirements for household electrical appliances used in special environments.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 1002 Single phase plugs and socket-outlets for household and similar purposes - Types, basic parameters and dimensions
GB/T 1003 Three phases plugs and socket-outlets for household and similar purposes - Types, basic parameters and dimensions
GB/T 2099.1 Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
GB/T 5296.2 Instructions for use of products of consumer interest - Part 2: Household and similar electrical appliances
GB/T 13993.1 Optical fibre cables for telecommunication - Part 1: General
GB/T 15092.1 Switches for appliances - Part 1: General requirements
GB/T 16915.1 Switches for household and similar fixed-electrical installations - Part 1: General requirements
GB 29550 General safety technique conditions for gas in civil building
GB 50169 Code for construction and acceptance of grounding connection - Electric equipment installation engineering

 
3 Terms and definitions

For the purpose of this document, the following terms and definitions apply.

3.1
installation
activities of fixing the household electrical appliances in place and assembling, connecting and debugging them properly according to the specific environmental conditions of such household electrical appliances and users so that they can meet relevant safety requirements and realize intended use functions

3.2
wiring
design and setting of external circuits and various pipelines of household electrical appliances so that they can be used properly

Note: It also includes the wiring of non-power lines, such as network cables and signal lines.

4 Classification

——Indoor type: household electrical appliances installed and wired indoors only;

——Indoor and outdoor type: household electrical appliances that need to be installed and wired indoors and outdoors

5 Installation requirements

Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Installation requirements
6 Wiring requirements
7 Acceptance requirements