GB/T 37183-2023 in English

《GB/T 37183-2023腐蚀控制工程全生命周期 风险评估》由TC381（全国腐蚀控制标准化技术委员会）归口，主管部门为中国石油和化学工业联合会。

Corrosion control engineering life cycle - Risk assessment

1 Scope

This document specifies the general requirements for risk assessment in the life cycle of corrosion control engineering.

It is applicable to risk assessment of all types of corrosion control engineering programs.

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 23123, Corrosion control engineering life cycle - General requirements

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply.

3.1
risk assessment

3.2
risk identification
process of finding, recognizing and describing corrosion risk of all elements in the corrosion control engineering life cycle.

3.3
risk analysis
process to comprehend the nature of corrosion risk and the degree of damage.

Note: Risk analysis is the basis of risk assessment (3.1).

3.4
risk evaluation
process of comparing the results of risk analysis (3.3) and summarize the traceability and supporting documents to determine whether the corrosion risk of all elements in the corrosion control engineering life cycle and/or its magnitude is acceptable or tolerable.

3.5
consequence

4 General Principles