GB/T 3758-2008 in English

VALID

24° cone connectors - Weld-on nipple

Issued on:2008-05-07
Implemented on:2008-11-01
File Format:PDF
Delivery:Via email within 1~3 business days

Price(USD)： $120.00
$117.00

Standard No:	GB/T 3758-2008
Document status:	VALID
Title in English:	24° cone connectors - Weld-on nipple
Title in Chinese:	卡套式管接头用锥密封焊接接管
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 1~3 business days
Issued on:	2008-05-07
Implemented on:	2008-11-01
Superseding:	GB/T 3758.1-1983 Male elbow for butt joints-Assembly GB/T 3758.2-1983 Male elbow for butt joints-Body
ICS Classification:	21.060.60-Rings, bushes, sleeves, collars
Chinese Classification:	J15-Pipeline fittings
Professional Classification:	GB-National Standard
Related Keywords:	weld-on nipple scopethis standard cone connectors ferrule-type pipe joints pipe outer diameter standard applies
Related Topics:	Pipeline drogue Copper pipe sealing joint sealed gloves card cover Compression fitting Ferrule fitting GBT3758 GB/T 3758-2008 Ferrule type pipe joint take over Flat welding head Card sleeve type connector double card sleeve jb/t6144.5-2007 cone joint Spherical hard seal joint Spherical sealing joint American cone seal joint Card connector Pipe joint seal end face seal Welded cone seal joint dimensions Pneumatic high pressure sealing joint standard Welded thermowell regulations Welded temperature protection sleeve installation Steel pipe casing welding joint Cone seal joint Sealing welding Vacuum seal welding Spherical-conical sealing joint Spherical sealing pipe joint Stainless steel pipe sealing joint Welded conical pipe joint body standard English ball head seal joint gb/t3758 gbt3758 Hard seal joint gb 3758 gb/t 3758

《GB/T 3758-2008卡套式管接头用锥密封焊接接管》由TC237（全国管路附件标准化技术委员会）归口，主管部门为中国机械工业联合会。
本标准是卡套式管接头系列标准之一。本标准自实施之日起代替ＧＢ／Ｔ３７５８．１―１９８３和ＧＢ／Ｔ３７５８．２―１９８３。本标准规定了卡套式管接头用锥密封焊接接管的尺寸、标记及技术要求。
本标准适用于管子外径为６ｍｍ～４２ｍｍ，最大工作压力１０ＭＰａ～６３ＭＰａ的液压流体传动和一般用途的管路系统。本标准是对ＧＢ／Ｔ３７５８．１―１９８３《卡套式锥螺纹对接直角管接头》和ＧＢ／Ｔ３７５８．２―１９８３《卡套式锥螺纹对接直角接头体》的修订。主要修订内容如下：
―――将两个标准的内容进行了整合修订，取消了原标准规定的型式与尺寸，规定了卡套式管接头用锥密封焊接接管的型式与尺寸；
―――修改了中文和英文名称。

Scope

This standard specifies the dimensions, markings and technical requirements of cone-seal welded pipes for ferrule-type pipe joints. This standard applies to hydraulic fluid transmission and general-purpose piping systems with a pipe outer diameter of 6mm to 42mm and a maximum working pressure of 10MPa to 63MPa.

More samples: QC/T 942-2021 DL/T 368-2010 NB/T 47013.2-2015

Sample only — not a preview of GB/T 3758-2008