GB/T 3759-1983 in English
SUPERSEDEDBite type tube fittings; Nuts
- Issued on:1983-06-17
- Implemented on:1984-04-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$78.00
《GB/T 3759-1983卡套式管接头用螺母》由TC237（全国管路附件标准化技术委员会）归口，主管部门为中国机械工业联合会。
本标准仅适用于卡套式管接头。
ChinaStandards.net is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is only applicable to bite type tube fittings.
Others
Example of designation:
Nut with the nominal pressure class J and the tube outer diameter D0 of 14 mm is designated as:
Nut J14 GB 3759-83
mm
Notes:
① The mass is the calculated value and the specific gravity is 7.85 kg/dm3.
② Under the condition of not affecting use, it is allowed to make a hexagonal body with the full length of L.
The technical conditions shall meet the requirements of GB 3765-83.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 5644-2008 in English
Flared couplings - Bulkhead union elbow
2008-05-07 -
GB/T 3750-2008 in English
24° cone connectors - Angle swivel screw connector
2008-05-07 -
GB/T 8606-2003 in English
Thread connecting dimensions and specifications of hydraulic fluid power - Quick action couplings
1988-01-05
