GB/T 3797-2005 in English

《GB/T 3797-2005电气控制设备》由TC266（全国低压成套开关设备和控制设备标准化技术委员会）归口，主管部门为中国电器工业协会
本标准规定了电气控制设备的术语和定义、使用条件及设计、制造和试验的基本要求。本标准适用于在额定电压为交流不超过1 000(1 140)V，频率不超过1 000 Hz，直流额定电压不超过1 500V的电气控制设备。

1 Scope

This standard specifies the terms and definitions and service conditions of electrical control assemblies as well as the basic requirements of their design, manufacture and test.
This standard is applicable to electrical control assemblies with frequency less than or equal to 1000Hz and rated voltage less than or equal to 1000(1140)V (AC) and 1500V (DC) (hereinafter referred to as control assemblies or assemblies).

2 Normative References

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding amending errors in the text) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
GB 156 Standard Voltage(neq IEC 60038)
GB/T 762 Standard Current (eqv IEC 60059)
GB/T 2681 Colours of Insulated Conductors Used in Electrical Assembly Devices
GB/T 2682 Colours of Indicator Lights and Push-buttons Used in Electrical Assembly Devices
GB/T 3047.1 Series of Basic Dimensions of Panels, Rack and Cabinets for Vertical Increment of 20mm
GB/T 3859.1 Semiconductor Convertors - Specification of Basic Requirements(eqv IEC 601 46)
GB/T 4205 Standard Directions of Movement for Actuators Which Control the Operation of Electrical Apparatus(eqv IEC: 60447)
GB 4208 Degrees of Protection Provided by Enclosure(IP Code) (eqv IEC 60529)
GB/T 4588.1 Sectional Specification: Single and Double Sided Printed Boards with Plain Holes
GB/T 4588.2 Sectional Specification: Single and Double Sided Printed Boards With Plated-through Holes
GB 7251.1-2005 Low-voltage Switchgear and Controlgear Assemblies - Part 1: Type-tested and Partially Type-tested Assemblies(idt IEC 60439-1: 1999)
GB/T 10233 Basic Test Method for Electric-driving Control Gear Assemblies
JB/T 3085 Code for Package and Transport of Electric-drive Controlgear
IEC 61800-3: 1996 Adjustable Speed Electrical Power Dive Systems - Part 3: EMC Product Standard including Specific Test Methods

3 Terms and Definitions

Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Requirements
5 Test
6 Nameplate, Marking, Packing and Transport
Appendix A (Normative ) Control Unit Test
Appendix B (Informative) Temperature Rise Measurement by Resistance Method