GB/T 42272-2022 in English
VALIDThe method for determining the chloride diffusion coefficient for cement mortar
- Issued on:2022-12-30
- Implemented on:2023-04-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$117.00
《GB/T 42272-2022水泥胶砂氯离子扩散系数检测方法》由TC184(全国水泥标准化技术委员会)归口,主管部门为中国建筑材料联合会。
Introduction
GB/T42272-2022 Standard Overview
GB/T42272-2022 "Test Method for Chloride Ion Diffusion Coefficient of Cement Mortar" is an important standard for the resistance of cement materials to chloride ion penetration, applicable to general-purpose Portland cement, marine Portland cement and other specified cement products. This standard specifies the entire process from specimen molding to test result processing, providing a scientific basis for evaluating cement performance.
Background and Significance of Standard Formulation
With the improvement of material durability requirements in engineering construction, chloride ion penetration is one of the key factors affecting concrete durability. The introduction of GB/T42272-2022 fills the gap in the field of chloride ion penetration resistance testing in the domestic cement industry and provides a standardized basis for engineering practice.
Comparative analysis of technical specifications
| Standard dimensions | GB/T42272-2022 | International integration | Analysis of improvement points |
|---|---|---|---|
| Detection method | Conductivity method based on Nernst-Einstein equation | In line with ISO standards | Optimized the sealing requirements of saturated salt device |
| Specimen specifications | 100mm×100mm×50mm | In line with international general dimensions | Added a detachable test mold design |
| Allowable deviation | Repeatability≤10%, reproducibility≤20% | Higher than some international standards | Instrument calibration requirements have been added |
Explanation of professional terms and practical application cases
Chloride ion diffusion coefficient (D): It indicates the number of chloride ions passing through a unit area per unit time, in units of m²/s. This parameter is the core indicator for evaluating the ability of cement to resist chloride ion penetration.
Vacuum saturation device: It is a key device used to quickly fill the surface of the specimen with sodium chloride solution under negative pressure conditions to ensure the consistency of the testing environment.
Conductivity method: The diffusion coefficient is calculated by measuring the conductivity change of the specimen and combining the Nernst-Einstein equation. This method is efficient and accurate.
Actual Application Case Analysis
A certain offshore project used the GB/T42272-2022 standard to test cement performance. The results showed that its chloride ion diffusion coefficient was 1.8×10⁻¹² m²/s, which met the evaluation level of "high" resistance to chloride ion penetration. Therefore, the project chose offshore silicate cement with better durability, which effectively extended the service life of the project.
Standard Implementation Recommendations
Laboratory Configuration Recommendations:Equipped with mixers and vibration tables that meet JC/T681, JC/T723 and other standards, and regularly calibrated vacuum saturation devices and chloride ion diffusion coefficient detectors.
Staff Training Recommendations:Focus on training test personnel on the operating specifications of specimen molding, saturation treatment and data collection to ensure the accuracy of test results.
Quality Control Recommendations: Establish a complete test record management system and regularly participate in proficiency testing programs (such as CNAS PT) to ensure consistency in testing between laboratories.

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/T 16656.501-2005 in English
Industrial automation systems and integration - Product data representation exchange - Part 501 : Application interpreted construct : Edge-based wireframe
2005-09-12 -

GB/T 14392.3-2023 in English
Layout key for international trade documents—Part 3:Application guidelines
2023-12-28 -

GB/T 15814.3-1995 in English
Reagent of fireworks and firecrackers - Thermal compatibility test - Method of DTA and DSC
1995-01-02 -

GB/T 726-1994 in English
Reciprocating internal combustion engines-Designation of the direction of rotation and of cylinders and valves in cylinder heads and definition of right-hand and left-hand in line engine
- -

GB/T 26333-2010 in English
Evaluation specification for security in industrial control network
2011-01-14 -

GB/T 9482-2005 in English
Agricultural machines implements and equipment- Dimensions for mechanical loading with bulk goods
2005-07-11 -

GB/T 6920-1986 in English
Water Quality - Determination of pH Value - Glass Electrode Method
1986-10-10 -

GB/T 20321-2023 in English
Inverter of wind and solar energy supply power system for off-grid
2023-05-23 -

GB/T 30825-2014 in English
Pyrometry for heat treatment
2014-06-24 -

GB/T 3885.4-1983 in English
Methods for chemical analysis of spodumenite and lepidolite concentrates--The EDTA volumetric method for the determination of aluminum oxide content
-