GB/T 5272-2002 in English

《GB/T 5272-2002梅花形弹性联轴器》由TC109（全国机器轴与附件标准化技术委员会）归口，主管部门为国家标准化管理委员会。
本标准规定了LM型、LMD型、LMS型、LMZ-Ⅰ型和LMZ-Ⅱ型梅花弹性联轴器的型式与参数、技术要求、试验方法、检验规则、标志、包装和贮存。本标准适用于联接两同轴线的传动轴系，具有一定补偿两轴相对偏移和一般减振性能，工作温度为-35℃～+80℃，传递公称转矩16N・m～25 000N・m。

1 Scope

This standard specifies the type and parameters, technical requirements, test methods, inspection rules, marking, packing and storage of Type LM, LMD, LMS, LMZ-I and LMZ-II coupling with elastic spider (hereinafter referred to as "coupling").
For the purposes of this standard, the said coupling is applicable to coupling the transmission shafting of two coaxial lines, and functions as two-shaft relative displacement compensation and general vibration reduction. Its working temperature: -35℃~+80℃ and transmission nominal torque 16N•m~25000N•mV.

2 Normative References

The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
GB/T 93-1987 Single Coil Spring Lock Washers, Normal Type
GB 191-2000 Packaging-Pictorial Marking for Handling of Goods (eqv ISO 780: 1997)
GB/T 528-1998 Rubber, Vulcamized or Thermoplastic--Determination of Tensile Stress-strain Properties (eqv ISO 37: 1994)
GB/T 531-1999 Rubber-Determination of Indentation Hardness by Means of Pocket Hardness Meters (idt ISO 7619: 1986)
GB/T 700-1988 Carbon Structural Steels
GB/T 1040-1992 Plastics-Determination of Tensile Properties
GB/T 1041-1992 Plastics-Determination of Compressive Properties (idt ISO 604: 1973)
GB/T 1043-1993 Plastics Determination of Charpy Impact Strength of Rigid Materials (neq ISO 179: 1982)
GB/T 1681-1991 Rubber-Determination of Rebound Resilience of Vulcanizates (eqv ISO 4662: 1986)
GB/T 2411-1980 Plastics--Shore Hardness Test (eqv ISO 868: 1978)
GB/T 3098.1-2000 Mechanical Properties of Fasteners-Bolts, Screws and Studs (idt ISO 898-1: 1999)
GB/T 3098.2-2000 Mechanical Properties of Fasteners-Nuts-Coarse Thread (idt ISO 898-2: 1992)
GB/T 3852-1997 Types and Dimensions for Coupling Bores and their Connection (neq ISO/R 775: 1969)
GB/T 4879-1999 Dustproof Packaging
GB/T 6388-1986 Transport Package Shipping Mark
GB/T 6557-1999 Mechanical Vibration--Methods and Criteria for the Mechanical Balancing of Flexible Rotors (idt ISO 11342: 1998)
GB/T 11352-1989 Carbon Steel Castings for General Engineering Purpose (neq ISO 3755: 1975)
GB/T 12458-1990 Mechanical Coupling--Classification
GB/T 13384-1992 General Specifications for Packing of Mechanical and Electrical Products

3 Classification

3.1 Type
The coupling is divided into five types in Table 1.

Foreword I
1 Scope
2 Normative References
3 Classification
4 Technical Requirements
5 Test Methods
6 Inspection Rules
7 Marking, Packing and Storage