GB/T 6995.5-2008 in English
VALIDMarkings for electric wires and cables - Part 5: Identifications of insulated cores of power cables
- Issued on:2008-06-18
- Implemented on:2009-03-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$68.00
《GB/T 6995.5-2008电线电缆识别标志方法 第5部分: 电力电缆绝缘线芯识别标志》由TC213(全国电线电缆标准化技术委员会)归口,主管部门为中国电器工业协会。
GB/T6995的本部分适用于电力电缆绝缘线芯的识别标志,包括充油电缆,油浸纸绝缘电缆和挤包固体绝缘电缆。
绝缘线芯识别标志除应符合本部分规定外,还应符合GB/T6995.1-2008和GB/T6995.2-2008的相关规定。
GB/T 6995.5-2008 Markings for electric wires and cables - Part 5: Identifications of insulated cores of power cables English
1 Scope
This Part of GB/T 6995 is applicable to the identification markings for the insulated cores of power cables, including oil filled cables, solid type cables and extruded solid insulated cables.
In addition to the requirements of this Part, Markings for insulated cores shall also meet the corresponding requirements of GB/T 6995.1-2008 and GB/T 6995.2-2008.
2 Normative References
The clauses of the following documents, through reference into this Part of GB/T 6995, constitute clauses of this Part. For dated references, subsequent amendments to (excluding correction to), or revisions of, any of them are not applicable to this Part. However, the parties who enter into an agreement according to this Part are encouraged to research whether the latest editions of these documents are applied or not. For undated references, the latest editions of them are applicable to this Part.
GB/T 6995.1-2008 Markings for Electric Wires and Cables - Part 1: General Requirements
GB/T 6995.2-2008 Markings for Electric Wires and Cables - Part 2: Standard Colours
3 Core Identification
3.1 Number and colour identification markings are adopted in the insulated cores of power cables.
3.2 Oil filled cable and solid type cable shall adopt number identification.
3.3 Extruded solid insulated cable adopts colour identification, but in particular cases, number identification is allowed.
4 Number Identification
4.1 General Requirements
For oil filled cable and solid type cable, Arabic numeral marking shall be printed on the paper tape of the outer insulation layer of insulated core; unless otherwise specified, the number marking shall be white.
The number markings shall be clear and legible.
4.2 Application of Number Marking

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/T 4024-1983 in English
Measuring methods for semiconductor device--Reverse blocking triode thyristor
1983-12-15 -

GB/T 6995.1-2008 in English
Markings for electric wires and cables - Part 1: General requirements
2008-06-18 -

GB/T 18890.2-2015 in English
Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)―Part 2:Power cables
2015-10-09 -

GB/T 17651.1-2021 in English
Measurement of smoke density of cables or optical fiber cables burning under defined conditions-Part 1:Test apparatus
2021-04-30 -

GB 4074.15-1983 in English
Methods of test for enameled wires--Repeated scrape resistance test
1983-12-24