GB/T 8626-2007 in English

《GB/T 8626-2007建筑材料可燃性试验方法》由TC113（全国消防标准化技术委员会）归口，TC113SC7（全国消防标准化技术委员会防火材料分会）执行，主管部门为应急管理部。
本标准规定了在没有外加辐射条件下，用小火焰直接冲击垂直放置的试样以测定建筑制品可燃性的方法。对于未被火焰点燃就熔化或收缩的制品，附录A给出了附加试验程序。附录B给出了试验方法精确度的信息。

1 Scope

This standard specifies a method of test for determining the ignitability of building products by direct small flame impingement under zero impressed irradiance using specimens tested in a vertical orientation.
The products that melt and shrink away from the flame without being ignited may be addressed by the additional procedure given in Appendix A.
Information on the precision of the test method is given in Appendix B.

2 Normative References

The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.

Foreword I
Contents
Foreword I
Introduction II
1 Scope
2 Normative References
3 Terms and Definitions
4 Test Apparatus
5 Test Specimen
6 Conditioning
7 Test Procedure
8 Expression of Results
9 Test Report
Appendix A (Normative) Procedure for Products which Melt and Shrink
Appendix B (Informative) Precision of Test Method