GB/T 8628-2001 in English

《GB/T 8628-2001纺织品 测定尺寸变化的试验中织物试样和服装的准备、标记及测量》由TC209（全国纺织品标准化技术委员会）归口，主管部门为中国纺织工业联合会。
本标准规定了测定因水洗、干洗、水浸渍或汽蒸而引起的尺寸变化时纺织织物、服装和织物组件的准备、标记和测量方法。本标准适用于机织物、针织物和衬纬制品，不适用于那些在使用中能轻易伸长的制品，例如某些针织品和家具覆盖物。

1 Scope

This standard specifies methods for the preparation, marking and measuring of textile fabrics, garmetns and fabric assemblies for use in tests for assessing dimentional change after specified treatment, e.g.washing, dry cleaning, soaking in water and steaming.
The standard is applicable to woven and knitted fabrics and to flat-woven, made-up textile articles. The procedures are not applicable to articles that stretch readily in use, e.g. knitted articles and certain upholstery coverings.

2 Normative References

The following standard contains provisions which through reference in this text, constitute provisions of this Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreemetns based on this Standard are encouraged to investigate the possibility of applying the most recent edition of the sandard indicated below.
GB 6529-1986 Standard Atmospheres for Textiles Conditioning and Testing
GB/T 8170-1987 Rules of Rounding off for Numerical Values

3 Principle

Test specimens are selected to represent the bulk of the textile under examination. Pairs of reference points are marked on each specimen and the distance between each pair of reference points is measured before and after specified treatments.

4 Apparatus

4.1 Rule or flexible steeel rule or glass-fibre tape
Marked in millimetres and longer than the greatest dimentsion being measured.
Note 1: The accuracy of glass-fibre tapes should be verified at least every six months.
4.2 Equipmetn for marking precise reference points, such as:
a) indelible ink, for use, if necessary, with a termplate with a measuring grid;
b) fine threads of contrasting colour, sewn into the fabric;
c) heated wire for making small holes (for marking thermoplastics materials);
d) staples (suitable for tests duirng which specimens are not agitated, e.g. for soaking in water).
4.3 Smooth, flat surface, large enough to lay out complete articles.
4.4 Means of producing the standard atmospheres for conditioning and testing textiles.
4.5 Workroom stands, to support garments.

Foreword I
ISO Foreword II
1 Scope
2 Normative References
3 Principle
4 Apparatus
5 Atmosphere for Conditioning and Testing
6 Fabric Specimens
7 Garments
8 Flat Made-up Textile Articles
9 Treatment of Specimens and Dimensional Measurement After Treatment
10 Test Results
11 Test Report
Appendix A (Suggestive) Preparation, Marking and Measuring of Specimen with Fabric Width Less than 500 mm
Appendix B (Suggestive) Measurement of Brassiere, Hosiery, Hat and Glove