HB 3482-1985 in English
VALIDExpanding Drill Used During Working Procedure for Hole Machining
- Issued on:1985-06-07
- Implemented on:1985-12-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$30.00
| Standard No: | HB 3482-1985 |
| Document status: | VALID |
| Title in English: | Expanding Drill Used During Working Procedure for Hole Machining |
| Title in Chinese: | 孔加工工序间用的扩孔钻 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 1985-06-07 |
| Implemented on: | 1985-12-01 |
| Professional Classification: | HB-Aviation |
| Related Keywords: | hole machining scopethis standard
hole processing processes reamer drill working procedure hole |
| Related Topics: | Hole processing
process Process pass Hole processing method Small hole mirror processing Drill bottom hole Hole expansion experiment |
附编制说明
Scope
This standard specifies the tolerance zone code, limit deviation, manufacturing basis and marking code of the reamer drill used for the dimensional mantissa between hole processing processes.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
HB 3429-1984 in English
Technical conditions for vernier caliper
1984-04-30 -
HB 6723.10-1993 in English
Depth Vernier Caliper Handle
1993-08-01 -
HB 806-1990 in English
Lower die base of steel mold for guide pillars after cold-punching mould
1990-09-18 -
HB 7540-1997 in English
Type 54 Cylindrical Die Roll for 55° Taper Pipe Thread R1/16~R2 P=0.907~2.309
1997-09-23 -
HB 4184-1988 in English
Technical Conditions for Nylon Band Bundling-up Machine
1988-04-10 -
HB 7151.1-1995 in English
Combined Clamp Interchangeable Parts - Pin Roll
1995-12-13 -
HB 893-1990 in English
Cold punching mould base and its technical conditions
1990-09-18 -
HB 7547-1997 in English
End Blade-cross-Center Double-gear-scappled Straight-handle Numerical Control End-milling Cutter for Hard Alloy Screw Blade Used in Machining Titanium Alloy d=16~32mm
1997-09-23 -
HB 4544-1992 in English
MJ Internal Thread Pin Type Double End Plain Plug Gauge MJ1.6~MJ3 for Series I Technical Bottom Holes
1992-10-04 -
HB 6998.1-1994 in English
Sine Tools - Narrow Sine Protractor
1994-06-01
