HG/T 21608-2012 in English
VALIDEngineering Technical Requirements for Liquid Loading Arm
- Issued on:2012-05-24
- Implemented on:2012-11-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$1,572.00
本标准规定了液体装卸臂的型式、技术要求、选用要求、材料应用、液体装卸区工程技术要求、汽车装卸区工程技术要求、火车装卸区工程技术要求、码头装卸区工程技术要求、检查、检验和试验等技术原则。
本标准适用于公称压力CL150、CL300或PN2.5、PN6、PN10、PN16、PN25、PN40、PN63,设计温度-196℃~250℃范围内,通过液体装卸臂实现汽车槽车、火车槽车或槽船装卸各种石油化工液体介质的卸载。
Scope
This standard is applicable to nominal pressures of CL150, CL300 or PN2.5, PN6, PN10, PN16, PN25, PN40, and PN63, and design temperatures within the range of -196°C to 250°C. The liquid loading and unloading arm is used to realize automobile tankers, train tankers, or Tank ships load and unload various petrochemical liquid media.

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

HG/T 3414-2002 in English
2--Naphthol--6 8--Disulfonic Acid Potassium Salt ( G Salt )
2002-09-28 -

HG 2172-1991 in English
Helium-neon laser phototypesetting film
1991-11-18 -

HG/T 3139.4-2018 in English
Vertical reducer for tank-Series LP parallel axis gears reducer
2018-10-22 -

HG/T 5062-2016 in English
Siler mirror back coatings
2016-10-22