HG/T 2376-2011 in English

本标准规定了搪玻璃套筒式换热器的型式、标记、基本参数、主要尺寸、技术要求及铭牌、出厂文件、包装运输和贮存。
本标准适用于内层和外层设计压力小于或等于0.6MPa，中层设计压力小于或等于0.25MPa，传热面积2.0m2～16m2，设计温度高于-20℃至200℃的搪玻璃套筒式换热器。

Scope

This standard specifies the type, marking, basic parameters, main dimensions, technical requirements and nameplate, factory documents, packaging, transportation and storage of glass-lined sleeve heat exchangers. This standard is applicable to glass-lined sleeves with inner and outer layer design pressures less than or equal to 0.6MPa, middle layer design pressure less than or equal to 0.25MPa, heat transfer area 2.0m to 16m, and design temperatures higher than -20°C to 200°C. Heat Exchanger.