HJ 538-2009 in English
VALIDStationary source emission - Determination of lead - Flame atomic absorption spectrometry
- Issued on:2009-12-31
- Implemented on:2010-04-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$185.00
本标准规定了测定固定污染源废气中铅的火焰原子吸收分光光度法。
本标准适用于固定污染源废气中铅的测定。
方法检出限为5μg/50ml 试样溶液,当采样体积为400L 时,检出限为0.013mg/m3,测定下限为0.052mg/m3。
Scope
This standard specifies the flame atomic absorption spectrophotometric method for the determination of lead in exhaust gases from stationary pollution sources. This standard is applicable to the determination of lead in waste gas from stationary pollution sources. The detection limit of the method is 5μg/50ml sample solution. When the sampling volume is 400L, the detection limit is 0.013mg/m, and the lower limit of determination is 0.052mg/.

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

HJ 53-2000 in English
Interim regulation for acceptable levels of residual radionuclides in soil of site considered for release
2000-05-22 -

HJ/T 2.4-1995 in English
Technical guidelines for noise impact assessment
1995-11-28