JC/T 2219-2014 in English

Modified inorganic powder composite building decoration material

1 Scope

This standard specifies the terms and definitions, classification and labeling, requirements, test methods, inspection rules, packaging, marking, transportation and storage for modified inorganic powder composite building decoration material.

This standard is applicable to the modified inorganic powder composite building decoration material for internal and external walls, floors and roofs of industrial and civil buildings.

2 Normative references

The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.

GB/T 1766 Paints and varnishes - Rating schemes of degradation of coats
CB/T 3810.7 Test methods of ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles
GB/T 4085 Semirigid polyvinyl chloride floor titles
GB/T 4100-2006 Ceramic tiles
GB 6566 Limits of radionuclides in building materials
GB/T 9780 Test method for dirt pickup resistance and stain removal of film of architectural coatings and paint
CB/T 9966.3 Test methods for natural facing stones - Part 3: Test methods for bulk density, true density, true porosity and water absorption
CB/T 15036.2 Solid wood flooring - Part 2: Examination methods
CB/T 16259 Test methods for in accelerated weathering building materials
GB/T 18586 Indoor decorating and refurbishing materials - Limit of harmful substances of polyvinyl chloride floor coverings
GB 50209 Code for acceptance of construction quality of building ground
GB 50210 Standard for construction quality acceptance of building decoration
JG/T 25 Determination for freeze-thaw resistance of film of building coatings

 
3 Terms and definitions

For the purposes of this document, the following terms and definitions apply.

3.1
modified inorganic powder
powder material obtained by pretreating, drying, grinding and mixing evenly according to the ratio inorganic material such as soil (such as building waste soil and mountain soil), stone powder, slag, tailings powder, ceramic slag powder, quartz sand, fly ash, etc., and then modifying it with surfactant

Foreword II
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and labeling
5 Requirements
6 Test methods
7 Inspection rules
8 Packaging, marking, transportation and storage
Annex A (Informative) Construction technical guide for modified inorganic powder composite building decoration material (MCM)