JG/T 481-2015 in English
VALIDWater-based Interior Wall Coating with Low-emission Volatile Organic Compounds (VOC)
- Issued on:2015-11-23
- Implemented on:2016-04-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$175.00
1 Scope
This standard specifies the terms and definitions, classification and labeling, requirements, test methods, inspection rules, as well as marking, packaging, transport and storage of the water-based interior wall coatings with low-emission volatile organic compounds (VOC).
This standard is applicable to water-based coatings such as paste putty, primer, top coat, and wood lacquer that are used for interior decoration.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 3186 Paints, varnishes and raw materials for paints and varnishes - Sampling
GB/T 6682 Water for analytical laboratory use - Specification and test methods
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 9750 Marks for package of coating products
GB/T 9756-2009 Synthetic resin emulsion coatings for interior wall
GB/T 9780-2013 Test method for dirt pickup resistance and stain removal of film of architectural coatings and paint
GB 11614 Flat glass
GB/T 13491-1992 General rule for packing of coatings
GB/T 15608 The Chinese color system
GB/T 18204.2-2014 Examination methods for public places - Part 2: Chemical pollutants
GB 18582 Indoor decorating and refurbishing materials - Limit of harmful substances of interior architectural coatings
GB/T 23999-2009 Water based coatings for woodenware for indoor decorating and refurbishing
GB 24408-2009 Limit of harmful substances of exterior wall coatings
GB 24410 Indoor decorating and refurbishing materials - Limit of harmful substances of water based woodenware coatings
JG/T 210-2007 Primer for interior and exterior wall
JG/T 298-2010 Putty for interior
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and labeling
5 General requirement
6 Requirements for limit of harmful substances and physical properties
7 Test methods
8 Inspection rules
9 Marking, packaging, transport and storage
Annex A (Informative) Substances that shall not be contained in the products
Annex B (Normative) Test for total volatile organic compounds (TVOC) emission level

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

JG/T 3017-1994 in English
Rigid polyvinyl chloride doors
1994-12-05 -

JG/T 5019-1993 in English
Pipe thread cutting machine
1993-12-03 -

JG/T 3031.8-1996 in English
Copper pipe fittings and caps for construction
1996-03-08 -

JG/T 5077-1995 in English
Oscillating roller performance test method
1995-09-18 -

JG 3006-1993 in English
Steel strand and steel wire unbonded tendons
1992-08-31 -

JG/T 5079.1-1995 in English
Noise limits for construction machinery and equipment
1996-05-20