JTG D81-2006 in English

1.0.1 The guidelines are formulated with a view to make safety and reasonable design, state-of-the-art technology, guaranteed quality and economic and practicality for the highway safety facilities.
1.0.2 The guidelines are applicable to newly-built and rebuilt highways.
1.0.3 Design content for the highway safety facilities include: barrier, traffic sign, traffic marking, fence, overpass fencing facilities, anti-glare facilities, delineator and movable barrier.
1.0.4 Highway safety facilities shall be made with overall design by combining with road-net and highway conditions, traffic conditions and environmental conditions. It shall be co-coordinated and cooperative used among traffic safety facilities, and among traffic safety device and highway main construction and other facilities.
1.0.5 Design for highway safety facilities shall adhere to the logos of "safety, environment protection, comfort and harmony", and incarnate guiding ideology of "people-oriented and safety-first".
1.0.6 Design for highway safety facilities shall consider influence factors of pavement and mat coat added on the roadway.
1.0.7 Under the conditions of meeting requirement for safety and functions of use, it shall adopt new technique, new material, new technology and new products positively and prudently.
1.0.8 Design for rebuilt project traffic safety facilities shall be made by combining with rebuilt highway, traffic and environmental conditions
1.0.9 Design for highway safety facilities shall not only comply with requirement of these guidelines, but also meet the requirement of current relevant standards and codes of the nation.
A kind of consecutive beam-column barrier structure, it is provided with certain strength and rigidity. Waveform beam barrier is the major representative type that with continuous beam and column consisted of scabbed corrugation steel plate and column, it absorbs collision energy by making use of distortion of soil matrix, column and corrugation steel plate, and compel out-of-control vehicle changing its direction.

1 General provision
2 Terminologies
3 Anti-collision property of barrier
4 Subgrade barriers
4.1 General requirements
4.2 Setting principle
4.3 Type selection
4.4 Structure and material requirements
5 Bridge barriers
5.1 General requirement
5.2 Setting principle
5.3 Type selection
5.4 Structure requirement
6 Traffic sign
6.1 General requirements
6.2 Setting principle
6.3 Layout
6.4 Support mode
6.5 Material requirements
6.6 Structure design
7 Traffic markings
7.1 General requirements
7.2 Setting principle
7.3 Material selection
8 Fence and overpass fencing facilities
8.1 General requirements
8.2 Setting principle
9 Anti-glare facilities
9.1 General requirements
9.2 Setting principle
10 Delineators
10.1 General requirements
10.2 Setting principle
11 Movable barriers
11.1 Movable barrier
11.2 Setting principle
Explanation of Wording in this code