JTG E60-2008 in English

1.0.1 This standard is formulated in order to adapt the demand of highway construction and management in China, guarantee the construction and maintenance quality of highway subgrade and pavement engineering, and regulate field testing instrument and equipment, test method and operating requirement.
1.0.2 This standard is applicable to field investigation, engineering quality testing and technology condition testing of highway subgrade and pavement.
1.0.3 When the test methods specified in this standard are applied in the quality evaluation or acceptance of road sections, the road section selection and sampling method shall comply the corresponding technical specifications of construction and maintenance, or the requirements of "Quality inspection and Evaluation Standards for Highway Engineering - Section 1: Civil Engineering" (JTG F80/1).
1.0.4 The instruments and equipments for testing in this standard shall meet the requirements of the corresponding standards and pass the inspection required,
1.0.5 The national legal system of units of measurement is adopted in this standard.
1.0.6 The field test of highway subgrade and pavement shall meet the requirements of the current national and professional standards or codes, besides complying with the requirements of this standard.

1 General Provisions
2 Terms and Symbols
2.1 Terms
2.2 Symbol
3 Field Sampling
T 0901—2008 Sampling method
4 Geometrical Dimension
T 0911-2008 Geometrical Dimension Testing Method of subgrade and pavement
T 0912——2008 Method for measuring depth of pavement - pitting and core drilling methods
T 0913——2008 Method for measuring depth of pavement - Short Burst Radar method
T 0914——2008 Method for Testing Pavement Cross Slope - Geometrical Data Test System
5 Compaction Degree
T 0921—2008 Method for Testing Compaction Degree - Pitting Sand Replacement Method
T 0922-2008 Method for Testing Compaction Degree - Nuclear Wet Density Tester
T 0923—1995 Method for Testing Compaction Degree - Core Cutter Method
T 0924——2008 Method for Testing Compaction Degree of Asphalt Pavement - Core Drilling Method
T 0925—2008 Method for Testing Compaction Degree - Non-nuclear Density Gauge
6 Roughness
T 0931—2008 Test Method for Roughness - Three-meter Ruler
T0932—2008 Method for Testing Roughness - Continuous Roughometer
T0933—2008 Method for Testing Roughness - Vehicular Bump-integrator
T0934—2008 Method for Testing Roughness - Vehicular Laser Roughometer
7 Strength and Modulus
T0941—2008 Testing Method for Field CBR of Soil Subgrade
T0943—2008 Method for Testing Rebound modulus of Soil Subgrade - Loading Plate
T0944—1995 Method for Testing Rebound modulus of Subgrade and Pavement - Benkelman Beam Test
T0945—2008 Method for Testing Rebound modulus of Subgrade and Pavement - Dynamic Cone Penetrometer
8 Bearing Capacity
T 0951-2008 Method for Testing Rebound Deflection of Subgrade Pavement-Benkelman Beam
T 0952-2008 Method for Testing the Pavement Deflection-Automatic Deflectometer
T 0953-2008 Method for Testing the Deflection with Falling Weight Deflectometer
9 Strength of Cement Concrete
T 0954—1995 Testing method of strength of cement concrete measured with resiliometer
T 0955 - 1955 testing method testing method for the cement concrete flexural strength of the pavement measured by the rebound method
T 0956—1995 Testing Method of the Strength of Cement Concrete by Speedy Method of Powder Actuated Shot
10 Sliding Resistance Performance
T 0961 - 1995 Test Method on Determination of Pavement Texture Depth by Manual Sanding Patch Method
T 0962 - 1995 Test Methods on Determination of Pavement Texture Depth by Electrical Sanding Device
T 0966 - 2008 Test Method on Determination of Pavement Texture Depth by Vehicular Laser Texture Depth Meter
T 0964 - 2008 Test Method on Determination of Pavement Friction Factor by Pendulum Tester
T 0965 - 2008 Test Method on Determination of Pavement Friction Factor by Single-Wheel Sideway Force Coefficient Test System
T 0967 - 2008 Test Method on Determination of Pavement Friction Factor By Double-Wheel Sideway Force Coefficient Test System
T 0968 - 2008 Test Method on Determination of Pavement Friction Factor by Dynamic Rotary Friction Factor Tester
11 Water Penetrations
T 0971 - 2008 Test Method on Water Permeability Coefficient Determination of Asphalt Pavement
12 Faulted Joint Slabs
T 0972 - 1995 Test Method on Faulted Joint Slabs
13 Ruts
T 0973 - 2008 Test Method on Asphalt Pavement Rut
14 Construction Control
T 0981 - 2008 Test Method on Construction Temperature of Hot Mixture Asphalt (HMA)
T 0982 - 1995 Test Method on Determination of Asphalt Dosage by Asphalt-Spray-Method Construction
T 0983 - 2008 Test Method on Determination of Total Asphalt Mixture Mass
T 0984 - 2008 Test Method on Penetration Depth Determination of Priming Oil at Semi-Rigid Base
Annex A Method on Random Sampling Point of Highway Subgrade Pavement
Annex B method on data reduction of test pavement section