JTG F71-2006 in English
SUPERSEDEDTechnical Specification for Construction of Highway Safety Facilities
- Issued on:2006-07-07
- Implemented on:2006-09-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$262.00
1.0.1 This code is formulated with a view to improve the application effects of highway safety facilities and ensure the construction quality of highway safety facilities.
1.0.2 This code is applicable to Construction and renovation highways.
1.0.3 The construction of new-built highway safety facilities shall assort with the construction of highway main work.
1.0.4 The construction quality superintendent of the construction organization shall check the project by himself, and the superintendent shall cooperate with the supervising engineer to check and accept after the project is completed.
1.0.5 The preparation before the construction and actual conditions of technology, construction organizing and construction management work under construction must be done for the construction of highway safety facilities, and the relevant previsions of this code and technical regulations shall be met.
1.0.6 The mature new techniques, new process, new material and new facilities which are approved by the competent authorities shall be adopted for the construction of highway safety facilities.
1.0.7 As for the construction of highway safety facilities, the relevant measures shall be adopted to reduce the environmental pollution and protect the environment.
1.0.8 As for the highway safety facilities, the principle of Civilized Construction, Manufactured in Safety shall be followed up and the safety operation specification shall be observed strictly, furthermore, the safe production instruction shall be enhanced and the management system of safe production shall be established and consummated.
1.0.9 As for the construction of highway safety facilities, not only the requirements stipulated in this code, but also those in the current relevant ones of the nation shall be complied with for the construction quality inspection and acceptance for the equipment installation.
1 General Rules
2 Preparation of Construction
3 Roadbed Guardrails
3.1 General Requirements
3.2 Cable Guardrails
3.3 Corrugated Sheet Beams for Guardrails
3.4 Concrete Guardrails
4 Bridge Guardrails
4.1 General Requirements
4.2 Material
4.3 Construction of Metal bridge Guardrails
4.4 Construction of Wall Type and Beam Column Type Bridge Railing of Reinforced Concrete
4.5 Construction of Combined Type Bridge Guardrails
4.6 Receiving Inspection
5 Traffic Signs
5.1 General Requirements
5.2 Materials
5.3 Constructions
5.4 Receiving Inspection
6 Traffic Guide Lines
6.1 General Requirements
6.2 Materials
6.3 Construction
6.4 Receiving Inspection
7 Bar Screens and Bridge-girder Protective Fences
7.1 General Requirements
7.2 Materials
7.3 Construction
7.4 Receiving Inspection
8 Anti-dazzling Facilities
8.1 General Requirements
8.2 Materials
8.3 Construction
8.4 Receiving Inspection
9 Delineators
9.1 General Requirements
9.2 Materials
9.3 Construction
9.4 Receiving Inspection
10 Floating Guardrails
10.1 General Requirements
10.2 Materials
10.3 Construction
10.4 Receiving Inspection
Wording Explanations

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

JT/T 524-2019 in English
Fiber for cement concrete in highway
2019-03-15 -

JT/T 669-2006 in English
Geosynthetics in highway engineerings-Sort capability demand and test method of composite materials
2006-12-19 -

JTJ 002-1987 in English
Standard of Technical Terms for Highway Engineering
1987-02-09 -

JTG B03-2006 in English
Specifications for Environmental Impact Assessment of Highways
2006-02-08 -

JT/T 798-2019 in English
Crumb rubber asphalt for highway engineering
2019-12-24