Sign In |Help & Support
ALL SECTORS
  • ALL SECTORS
  • GB(National Standard)
  • CB(Shipping)
  • CECS(Engineering Construction)
  • CJ(Urban Construction)
  • CY(News and Publication)
  • DB(Provincial Standard)
  • DL(Electricity & Power)
  • DZ(Geology & Mineralogy)
  • FZ(Spinning & Textile)
  • GA(Public Security)
  • HB(Aviation)
  • HG(Chemical Industry)
  • HJ(Environmental Protection)
  • JB(Machinery)
  • JC(Building Materials)
  • JG(Building & Construction)
  • JJ(Metering)
  • JT(Highway & Transportation)
  • LY(Forestry)
  • MT(Coal)
  • NB(Energy)
  • NY(Agriculture)
  • QB(Light Industry)
  • QC(Automobile & Vehicle)
  • QJ(Aerospace)
  • SH(Petrochemical)
  • SJ(Electronics)
  • SL(Water Resources)
  • SN(Commodity Inspection)
  • SY(Oil & Gas)
  • TB(Railway & Train)
  • YB(Ferrous Metallurgy)
  • YC(Tobacco)
  • YD(Telecommunication)
  • YY(Medical Device)
Database: 365,228(8 Aug 2026)
flexible foam rubber wood plastic 24-hour system operation
QB/T 5200-2017 in English

QB/T 5200-2017 in English

VALID

Garment steamer

  • Issued on:2017-11-07
  • Implemented on:2018-04-01
  • File Format:PDF
  • Delivery:Via email within 1~3 business days
Price(USD): $280.00
$272.00

本标准规定了蒸汽挂烫机的术语和定义、产品分类、要求、试验方法及检验规则、标志、包装、运输和贮存。
本标准适用于在家庭和类似场合使用,额定电压不超过250 V的蒸汽挂烫机。


Introduction

Analysis of the core technical requirements of the standard

Key indicators Normal pressure requirements Pressure requirements Test methods
Steam volume ≥90% of nominal value ≥90% of nominal value 6.3.2 Weighing method
Energy efficiency ≤0.87kW·h/kg Not applicable 6.4 Electricity measurement
Wrinkle removal rate ≥90% 6.8 Grid Method
Bacteria Removal Rate ≥99.99% Appendix C Microbial Detection

Product Classification Technical Characteristics

Pole-type Steam Garment SteamerMust pass:

  • Support rod load test: 7kg load for 2 hours without deformation (6.14.1)
  • Assembly reliability: 300 times of disassembly and assembly test (6.14.3)

Handheld Garment SteamerSpecial requirements:

  • Drop test: 76cm drop without leakage (6.17.2)
  • Power cord length: ≥1.3m (5.13)

Details of key test methods

1. Wrinkle removal rate test (Clause 6.8)

A 200-grid (2cm×4cm) cotton load cloth is used and 800 standard folds are formed by fan-shaped folding. During the test:

  1. The steam nozzle is ironed vertically at a speed of 3-5cm/s
  2. Residual wrinkles>1cm are considered unqualified
  3. Calculation formula: λ=(N1-N2)/N1×100%

2. Life test (Clause 6.12)

Simulate a 500-hour use cycle (60min on/30min off), requirements:

  • Test water hardness 30±10mg/L
  • Clean scale every 50 cycles
  • Steam must be discharged normally after the test

Standard implementation recommendations

Manufacturers

  • Focus on the durability of the steam duct (must pass 120℃ high temperature + hot and cold cycle test)
  • Pressure-type products must add a pressure seal test (Clause 6.18)

Testing agency

  • The sterilization test needs to use standard strains of Staphylococcus aureus ATCC6538 and Escherichia coli 8099
  • The steam volume test needs to control the ambient temperature to 25±2℃ (Clause 6.1)

Sample only — not a preview of QB/T 5200-2017
Page: 1 / 0
100%

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend