QC/T 916-2013 in English
VALIDSpecifications for mono-fuel DME engines of heavy-duty vehicles
- Issued on:2013-04-25
- Implemented on:2013-09-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$340.00
| Standard No: | QC/T 916-2013 |
| Document status: | VALID |
| Title in English: | Specifications for mono-fuel DME engines of heavy-duty vehicles |
| Title in Chinese: | 重型车用二甲醚单燃料发动机 技术条件 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2013-04-25 |
| Implemented on: | 2013-09-01 |
| Professional Classification: | QC-Automobile |
| Related Keywords: | heavy-duty vehicles
heavy-duty vehicles scopethis standard mono-fuel dme engines single-fuel engines motor vehicles |
| Related Topics: | Dimethyl ether
Heavy Vehicle Standard qc/t938-2013 qc/t+958-2013 methyl ether QC/T+938-2013 qc/t944-2013 qc/t+953-2013 fuel bill qc/t 960.1-2013 qc/t 621.1-2013 qc/t 621.3-2013 qc/t+944-2013 qc/t919-2013 qc/t+919-2013 qc/t+912-2013 qc/t+918-2013 qc/t+941-2013 qc/t 621.2-2013 Thorium fuel condition qc/t948-2013 Dimethyl ether for vehicle fuel Engine DTG technology engine technology qc/t941-2013 qc/t935-2013 qc/t935 2013 ys/t 916-2013 |
本标准规定了重型车用二甲醚单燃料发动机的技术要求、试验方法、检验规则、标志、包装、运输和储存的条件。
本标准适用于设计车速大于25km/h的M2、M3、N2和N3类及最大设计总质量大于3500kg的M1类机动车装用的二甲醚单燃料发动机。
Scope
This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation and storage conditions for dimethyl ether single-fuel engines for heavy-duty vehicles. This standard applies to dimethyl ether single-fuel engines (hereinafter referred to as engines) installed on M, M, N and N categories of motor vehicles with a design speed greater than 25km/h and M category motor vehicles with a maximum design total mass greater than 3500kg.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
QC/T 3-2017 in English
Completeness of automotive product drawing and design document
2017-01-09 -
QC/T 1099-2018 in English
Specification for collapsible spacer used in automotive drive head assembly
2018-07-04 -
QC/T 1141-2020 in English
Aubomobile clutch release bearing assembly
2020-12-09 -
QC/T 276-1999 in English
Specifications for heat treatment hardness of automobile parts
1999-03-15 -
QC/T 1008-2015 in English
Specifications of tank ventilation filters
2015-07-14 -
QC/T 597.1-2017 in English
Technical conditions for threaded fasteners with adhesive coating-Part 1:Microencapsulated locking coating
2017-01-09 -
QC/T 629-2021 in English
Automobile sun shield
2021-03-05 -
QC/T 2-2017 in English
Formats of automotive product drawing
2017-01-09 -
QC/T 236-2019 in English
Test method for automotive interior decorative material properties
2019-11-11 -
QC/T 422-2000 in English
Automobile silicon rectifier diode
-
