QJ 2249-1992 in English
VALIDGeneral Technical Requirements for Satellite Lifting, Turnover, Parking and Transportation
- Issued on:1992-02-28
- Implemented on:1992-11-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$88.00
| Standard No: | QJ 2249-1992 |
| Document status: | VALID |
| Title in English: | General Technical Requirements for Satellite Lifting, Turnover, Parking and Transportation |
| Title in Chinese: | 卫星吊装 翻转 停放 运输通用技术要求 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 1992-02-28 |
| Implemented on: | 1992-11-01 |
| ICS Classification: | 49.120-Cargo equipment |
| Chinese Classification: | V84-Transporting, hoisting and filling equipment |
| Professional Classification: | QJ-Aerospace |
| Related Keywords: | general technical requirements
technical requirements general requirements transportation general satellite lifting |
| Related Topics: | turn over
use technology Hoisting microsatellite technology stop General technical requirements for hoisting, flipping, parking, transportation and storage of spacecraft |
General technical requirements for satellite hoisting, overturning, parking and transportation
1 Subject content and application scope
This standard specifies the general requirements for satellite hoisting, overturning, parking, transportation and mechanical ground support equipment (hereinafter referred to as “equipment”).
This standard is applicable to satellites at all stages of development except for the prototype. This standard can also be referenced for the cabin section and its components.
2 Normative references
GB 5082-85 The commanding signal for lifting and moving
GB 6067-85 Safety rules for lifting appliances
3 General requirements
3.1 The safety factor of lifting appliance and overturning equipment shall generally be taken as 5, and that of parking equipment shall generally be taken as 3.
3.2 The equipment shall be periodically verified in service and have a certificate of conformity.
3.3 The equipment shall be marked with product code, rated load and manufacturing date.
3.4 The equipment shall be convenient for moving.
3.5 The equipment shall be kept clean and the sprayed protective layer shall not fall off.
3.6 Protective measures shall be taken to prevent extrusion and scratch at the contact between equipment and satellite body.
3.7 Insulation pads shall be provided between hooks and lifting appliance for hoisting the whole satellite.
3.8 The parking surface of satellite body is generally the docking surface between satellite body and carrier rocket. The connection mode between the parking surface and the parking trolley of the satellite body shall be consistent with that between the satellite body and the carrier rocket. During connection, the number of bolts can be reduced, but the minimum number is 8. Exploding bolts shall be process bolts.
1 Subject content and application scope
2 Normative references
3 General requirements
4 Technical requirements for hoisting
5 Technical requirements for overturning
6 Technical requirements for parking
7 Technical requirements for transportation
Additional explanation

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

QJ 2796-1996 in English
General Specification for Bomb Body Insulation Transportation Box
1996-04-19 -

QJ 2472.1-1993 in English
General Technical Specifications for Lifting Device - Beam-type Lifting Device
1993-03-29