SY/T 6858.3-2012 in English
VALIDNondestructive Testing Method for OCTG--Part3: Magnetic Particle Testing for Drilling Tool Thread
- Issued on:2012-08-23
- Implemented on:2012-12-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$146.00
Scope
This part of SY/T 6858 specifies the magnetization method, magnetic field strength, magnetic suspension preparation, detection method, magnetic mark evaluation, content of the test report and general requirements for test personnel for magnetic particle testing of drill tool threads. This section is applicable to magnetic particle inspection of surface or near-surface defects in the threaded parts of ferromagnetic drilling tools used for oil and gas well drilling.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
SY/T 5429-1991 in English
Small diameter flow moisture tester
1992-01-15 -
SY/T 6268-1996 in English
Recommended Practices for Selection of Tubing and Casing
1996-12-31 -
SY/T 6863-2012 in English
Calibration Method of Mudcake Coefficient Device
2012-01-04 -
SY/T 5890-1993 in English
Method for evaluating the performance of fungicides
1994-01-06 -
SY/T 6327-1997 in English
Oil field drilling and production equipment--Method of type designation
1997-12-31 -
SY/T 5899-1993 in English
Technical conditions of hydraulic power instrument
1994-01-06 -
SY/T 10010-2020 in English
Recommended practice for design, installation and maintenance of electrical systems for fixed and floating offshore petroleum facilities for unclassified and Class I, Division 1 and Division 2 locations
2020-10-23 -
SY 5488-1992 in English
Anti-mill operating procedures set out
1992-09-17 -
SY/T 5962-1994 in English
Well washing machine
1994-12-01 -
SY/T 5587.2-1993 in English
Technical procedures for non-killing operations for routine workover operations in oil and water wells
1993-09-09
