TSG S7005-2005 in English

Article 1 This detailed rules are made according “Type test rules of passenger ropeway”, in order to regulate the type test work of passenger ropeway and improve the quality of type test work of passenger ropeway parts.

Article 2 This detailed rules test is applicable to the type test of Passenger aerial ropeway and passenger funicular cable car. Please refer to the Annex 1 for the passenger ropeway parts (hereafter as parts) included.

Article 3 Below codes are cited for technical specification and requirements for this detailed rule list.
(1) GB/T 12352-1990 ”Safety Rules of Passenger Aerial Ropeway ”
(2) GB/T 13676-1992 “Design Rules of Bi-cable Jig-back Aerial Passenger Ropeway ”
(3) GB/T 13677-1992 “Design Rules of Mono-cable Fixed-grip Aerial Passenger Ropeway ”
(4) GB/T 13678-1992 “Design Rules of Mono-cable Detachable-grip Aerial Passenger Ropeway ”
(5) GB/T 19401-2003 “Technical Rules of Passenger Funicular Cable Car”

Article 4 Below conditions are required for Parts test.
(1) Design appraisal done for design documents of prototype.
(2) Prototype manufacture examination qualified.
(3) Difference between the test load and the design is within +/－2%
(4) Ambient temperature of test is: -30~40 oC, wind power is less than grade 7.
(5) For particular parts, test conditions could be added or reduced accordingly

Article 5 Company applying for Type test (hereafter as applicant Company) should submit below documents to Part Test Department (hereafter as Test Department):
(1) Appraisal report of Prototype Design Document.
(2) Conformity report of Prototype examination.
(3) General Drawing of Prototype.
(4) Drawings for critical parts.
(5) Design Calculation Note (if necessary).
(6) Manufacturing & Assembly Process of Critical Parts.
(7) Welding Process of Critical Parts.
(8) Material Certificate of Critical Parts & Quality Certificate of Purchased parts.
(9) Non-destructive Detection Report of Critical Parts.
(10) Operation & Maintenance Manual.
(11) Empty Load Test Report before Delivery of the sample machine.
(12) Other documents needed by test department.

Detailed rules of Passenger ropeway parts type test
Annex 1 Passenger ropeway parts list for type test
Annex 2 Type test of Drive and Return Bullwheel of Passenger Ropeway.
Annex 3 Type test of grip of passenger ropeway
Annex 4 Type test of carrier of passenger ropeway.
Annex 5 Type test for support/ compression sheave of passenger ropeway.