YD/T 2307-2011 in English

1 Scope

This standard specifies the technical requirements and testing methods for general function of mobile telecommunication terminal (hereinafter referred to as “mobile terminal”) in the one-card one-standby, multi-card one-standby, one-card multi-standby and multi-card multi-standby.

This standard applies to GSM (GPRS), WCDMA, TD-SCDMA, cdma2000, cdma2000HRPD and other systems as well as their combined mobile terminals. It may be used as reference for other systems of wireless terminals.

2 Normative References

The following documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB 2312 Code of Chinese Graphic Character Set for Information Interchange; Primary Set
Regulation of the People's Republic of China on Telecommunications

3 Terms, Definitions and Abbreviations

For the purposes of this standard, the following terms and definitions apply.

3.1 Terms and Definitions

3.1.1
Subscriber Identity Module
a general term for SM card, USIM card, and R-UM card

3.1.2
Multi-Mode
supporting multiple modes in GSM (GPRS), WCDMA, TD-SCDMA, cdma2000, cdma2000HRPD and other systems

3.1.3
Multi-Standby
supporting the same or different wireless access technologies to stand by at the same time

3.1.4
Multi-Path
supporting the same or different wireless access technologies to communicate at the same time.

3.2 Abbreviations
... ...
... ...
4 General

According to the number of its standby networks and the number of its supported card slots, the mobile terminal can be classified into one-card one-standby, one-card multi-standby, multi-card one-standby and multi-card multi-standby ones.

The one-card one-standby mobile terminal shall comply with the requirements of 5.1.1 and 6.1.1;

The one-card multi-standby mobile terminal shall comply with the requirements of 5.1.1 and 6.1.1; in case of one-card multi-standby, the mobile terminal shall comply with the requirements of 5.2.1 and 6.2.1;

The multi-card one-standby mobile terminal shall comply with the requirements of 5.1.1 and 6.1.1; in case of multi-card one-standby, the mobile terminal shall comply with the requirements of 5.1.2 and 6.1.2;

The multi-card multi-standby mobile terminal shall comply with the requirements of 5.1.1 and 6.1.1; in case of multi-card one-standby, it shall comply with the requirements of 5.1.2 and 6.1.2; in case of multi-card multi-standby, the mobile terminal shall comply with the requirements of 5.2.2 and 6.2.2.

See Annex A for the requirements on mandatory and optional functions for various types of mobile terminals.

For non-UIM mobile terminal, the information of the Subscriber Identity Module shall be stored in the mobile terminal, and the contracting identification subscriber in the mobile terminal is equivalent to that on the Subscriber Identity Module.

5 Technical Requirement and Testing Methods for General Function of Mobile Telecommunication Terminal

Foreword i
1 Scope
2 Normative References
3 Terms, Definitions and Abbreviations
3.1 Terms and Definitions
3.2 Abbreviations
4 General
5 Technical Requirement and Testing Methods for General Function of Mobile Telecommunication Terminal
5.1 Technical Requirement for Functions in Case of One-Standby
5.2 Technical Requirement for Functions in Case of Multi-Standby
6 Testing Methods for General Function of Mobile Telecommunication Terminal
6.1 Testing Methods for Functions in Case of One-Standby
6.2 Testing Methods for Functions in Case of Multi-Standby
Annex A (Normative) Mandatory and Optional Requirements for Functions of the Mobile Terminal