YS/T 360.3-2011 in English
VALIDMethods for chemical analysis of ilmenite concentrate——Part 3:Determination of ferrous oxide content ——Potassium dichromate titrimetric method
- Issued on:2011-12-20
- Implemented on:2012-07-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$127.00
本标准规定了钛铁矿精矿中氧化亚铁量的测定方法。
本标准适用于钛铁矿精矿中氧化亚铁量的测定。测定范围:1.00%~40.00%。
本标准适用于含铬、钒量不大于3mg,钼、钨量不大于2mg,锡、铜量不大于1mg的试料中氧化亚铁量的测定。
Scope
This part of YS/T 360 specifies the method for determining the amount of ferrous oxide in ilmenite concentrate. This section applies to the determination of the amount of ferrous iron oxide in ilmenite concentrate. The measurement range is 1.00%~40.00%. This section is applicable to the determination of the amount of ferrous oxide in samples containing chromium and vanadium not more than 3 mg, molybdenum and tungsten not more than 2 mg, tin and copper not more than 1 mg.

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

YS/T 745.7-2010 in English
Methods for chemical analysis of copper anode slime—Part 7:Determination of bismuth content—Flame atomic absorption spectrophotometry and Na2EDTA titration method
2010-11-22 -

YS/T 514.1-2009 in English
Methods for chemical analysis of high-titanium slag and rutile—Part 1:Determination of titanium dioxide content—Ferric ammonium sulfate titration
2009-12-04