Gel rate determination

Gel rate determination, Total:126 items.

The international standard classification for "Gel rate determination" includes: Animal feeding stuffs , Plywood , Plastics , Solvents , Latex and raw rubber , Rubber , Plastics in general .

The Chinese standard classification for "Gel rate determination" includes: Livestock and poultry feed and additive , Artificial board , Basic standards and general methods for synthetic resin and plastic , Coating auxiliary materials , Rubber products in general , Basic standard and general method for synthetic rubber , Forestry chemical raw material .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1692-1992 Vulcanized rubber--Determination of the insuiation resistivity
GB/T 1692-2008 Vulcanized rubber-Determination of the insulation resistivity
GB/T 13080.2-2005 Determination of
GB/T 9846.11-1988 Plywood--Determination of moisture content
GB/T 12007.7-1989 Determination of gelation time of epoxide resins
GB 12007.7-1989 Determination of gelation time of epoxide resins
GB/T 8291-1987 Natural rubber latex concentrate--Determination of coagulum content
GB/T 11205-2009 Rubber - Determination of thermal conductivity by means of hot -wire method
GB/T 8291-2023 Rubber latex―Determination of coagulum content(sieve residue)
GB/T 1755-1979 Method of test for coloid ratio of thinnersand anti-blushing agents

Professional Standard - Petrochemical Industry

SH/T 1153-2011 Synthetic rubber latex — Determination of coagulum content（sieve residue）
SH/T 1050-2014 Determination of gel content of raw synthetic
SH/T 1050-1991 Determination of gel content of raw synthetic rubber
SH/T 1153-1992(1998年确认) Synthetic rubber latex—Determination of congulum content(sieve residue)
SH/T 1153-1992 Synthetic rubber latex.Determination of congulum content (sieve residue)

National Metrological Verification Regulations of the People's Republic of China

JJG 159-2020 Concrete resistivity tester

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39421-2020 Methods for determining the static gel strength of cement formulations
GB/T 37498-2019 Rubber,raw natural—Determination of the gel content of technically specified rubber (TSR)

Group Standards of the People's Republic of China

T/CPCIF 0328-2023 Determination of rubber content of Taraxacum kok-saghyz by differential weight method

Professional Standard - Commodity Inspection

SN/T 2843-2011 Test Method for the Gum Percentage of Raw Silk

Professional Standard - Chemical Industry

HG/T 2724.4-1995 Determination of Stress Retention by Rubber Thread Test Method
HG/T 3861-2006 Methods of test for dilution ratio of thinners and anti - Blushing agents

国家林业局

LY/T 2720-2016 Method for determination of breakage rate of wood on laminated surfaces

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33315-2016 Plastics--Phenolic resins--Determination of the gel time

Professional Standard - Agriculture

GB/T 3517-1992 Rubber, raw natural-Determination of plasticity retention index
GB 8291-1987 Natural rubber latex concentrate; Determination of coagulum content

未注明发布机构

DIN EN 12390-16 E:2018-04 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete

TR-TSE

TS 3152-1978 Rubber Latices - Determination Of Coagulum

RU-GOST R

GOST 24923-1981 Latexes. Determination of coagulum content
GOST 28643-1990 Rubber latex. Determination of coagulum content (sieve residue)
GOST 25183.8-1982 Photographic gelatine. Method of determination of jelly hardness
GOST 25183.7-1982 Photographic gelatine. Method of determination of specific electroconductivity

American Society for Testing and Materials (ASTM)

ASTM D3596-14 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
ASTM D2765-11 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
ASTM D8329-21 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Materi
ASTM D8329-20 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Materi

Association Francaise de Normalisation

NF EN ISO 15720:2001 Metallic coatings - Porosity testing - Porosity of gold or palladium coatings on metals by gel electrography
NF EN 666:1995 Resilient Flooring – Determination of Gelling
NF T42-010*NF ISO 706:2005 Rubber latex - Determination of coagulum content (sieve residue)
NF T42-010:1997 Rubber latex. Determination of coagulum content (sieve residue).
NF ISO 706:2005 Rubber latex - Determination of coagulum content (refusal on sieve)
NF P62-119*NF EN 666:1995 Resilient floor coverings. Determination of gelling.
NF B57-040:1974 Expanded pure agglomerated cork. Determination of bulk density.

International Organization for Standardization (ISO)

ISO 706:1975 Title missing - Legacy paper document
ISO 706:1976 Rubber latices — Determination of coagulum content
ISO 17278:2013 Rubber, raw natural.Determination of the gel content of technically specified rubber (TSR)
ISO 706:2004 Rubber latex - Determination of coagulum content (sieve residue)
ISO 706:1985 Rubber latex; Determination of coagulum content (sieve residue)
ISO 17278:2020 Rubber, raw natural — Determination of the gel content of technically specified rubber (TSR)
ISO 2951:1974 Vulcanized rubber; Determination of insulation resistance

SCC

UNE 53610:1983 RUBBER LATICES. DETERMINATION OF COAGULUM CONTENT
BS 6057-3-3.8:1981 Rubber latices. Methods of test-Determination of coagulum content of rubber latices
12/30255141 DC BS ISO 17278. Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)
DANSK DS/EN 12390-19:2023 Testing of hardened concrete – Determination of electrical resistivity
DANSK DS/EN ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
DANSK DS/EN 12390-16:2019 Testing hardened concrete – Part 16: Determination of the shrinkage of concrete
DANSK DS/EN 666:1994 Resilient floor coverings - Determination of gelling
AENOR UNE-EN 12390-16:2020 Hardened concrete tests. Part 16: Determination of concrete shrinkage.
AENOR UNE-EN 666:1995 Resilient floor coverings - Determination of gelling
NS-EN 666:1994 Resilient floor coverings — Determination of gelling
DIN EN 12390-16 E:2018 Draft Document - Testing hardened concrete - Part 16: Determination of the shrinkage of concrete; German and English version prEN 12390-16:2018
NS-EN ISO 15720:2001 Metallic coatings — Porosity tests — Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001)

GSO

GSO ISO 17278:2016 Rubber, raw natural -- Determination of the gel content of technically specified rubber (TSR)
OS GSO ISO 17278:2016 Rubber, raw natural -- Determination of the gel content of technically specified rubber (TSR)
BH GSO ISO 17278:2017 Rubber, raw natural -- Determination of the gel content of technically specified rubber (TSR)
OS GSO ISO 15720:2013 Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
BH GSO ISO 15720:2016 Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
GSO ISO 706:2015 Rubber latex -- Determination of coagulum content (sieve residue)

RO-ASRO

STAS 2833-1980 Tests of concretes. DETERMINAT ION OF AXIAL SHRINKAGE OF HARDENED CONCRETE
STAS 8798/11-1987 RUBBER LATEX Determination of coagulum content
SR EN 666-1996 Resilient floor coverings. Determination of gelling
STAS 9869/5-1975 RUBBER THREADS Determination of the elongation under a spe citied load

British Standards Institution (BSI)

BS ISO 17278:2013 Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)
BS 1881-122:2011+A1:2020 Testing concrete - Method for determination of water absorption
BS ISO 15040:1999 Composites - Prepregs - Determination of gel time
BS ISO 17278:2020 Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)
BS ISO 706:2004 Rubber latex - Determination of coagulum content (sieve residue)
19/30388674 DC BS ISO 17278. Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)
BS EN 12390-19:2023 Testing of hardened concrete — Determination of electrical resistivity
BS EN ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
BS EN 666:1995 Resilient floor coverings. Determination of gelling
BS EN 1353:1997(1999) Determination of moisture content of autoclaved aerated concrete
BS EN 1348:1999 Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives

Korean Agency for Technology and Standards (KATS)

KS M 6402-2023 Testing methods of wet gel strength for compounded latex
KS M ISO 706-2019 Rubber latex－Determination of coagulum content(sieve residue)
KS M ISO 706:2009 Rubber latex－Determination of coagulum content(sieve residue)
KS F 2506-1997 Testing method for voidratio in aggregate for concrete
KS M ISO 706-2009(2019) Rubber latex－Determination of coagulum content(sieve residue)

NL-NEN

NEN 5928-1990 Aggregates for concrete - Determination of water absorption

AENOR

UNE 83608:2012 Shotcrete. Determination of rebound.
UNE-ISO 706:2012 Rubber latex. Determination of coagulum content (sieve residue)
UNE-EN 666:1995 RESILIENT FLOOR COVERINGS. DETERMINATION OF GELLING.
UNE-EN 680:2006 Determination of the drying shrinkage of autoclaved aerated concrete
UNE-EN ISO 15720:2002 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography. (ISO 15720:2001)
UNE 83980:2014 Concrete durability. Test methods. Determination of the water absorption, density and accessible porosity for water in concrete.

VN-TCVN

TCVN 6317-2007 Rubber latex.Determination of coagulum content (sieve residue)
TCVN 4862-1989 Raw natural rubber.Determination of plasticity retention index

IT-UNI

UNI 7087-1972 Concrete. Anti-regression assay for gel and melt cycles

Danish Standards Foundation

DS/EN ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
DS 423.15:1984 Testing of concrete. Determination of the content of airvoid in fresh concrete
DS/EN 1353:1997 Determination of moisture content of autoclaved aerated concrete
DS/EN 680:2006 Determination of the drying shrinkage of autoclaved aerated concrete
DS/EN 666:1995 Resilient floor coverings - Determination of gelling

(U.S.) Ford Automotive Standards

FORD FLTM EU-BV 055-01-2000 DETERMINATION OF THREAD LOCKING ADHESIVE EFFICIENCY
FORD FLTM EU-BV 055-1-2000 DETERMINATION OF THREAD LOCKING ADHESIVE EFFICIENCY

ES-UNE

UNE-EN 12390-16:2020 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete

German Institute for Standardization

DIN EN ISO 15720:2001-08 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001); German version EN ISO 15720:2001
DIN EN 12390-16:2019-12 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete; German version EN 12390-16:2019
DIN EN 12390-16:2019 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete
DIN EN 666:1995 Resilient floor coverings - Determination of gelling; German version EN 666:1994
DIN EN 666:1995-01 Resilient floor coverings - Determination of gelling; German version EN 666:1994
DIN ISO 706:2006 Rubber latex - Determination of coagulum content (sieve residue) (ISO 706:2004);English version of DIN ISO 706:2006-03
DIN EN 1353:1997-02 Determination of moisture content of autoclaved aerated concrete; German version EN 1353:1996
DIN EN 12504-5:2023 Testing concrete in structures - Part 5: Determination of concrete cover using electromagnetic covermeters; German and English version prEN 12504-5:2023

CEN - European Committee for Standardization

PREN 12390-16-2018 Testing hardened concrete - Part 16: Determination of the shrinkage of concrete
EN 1348:1997 Adhesives for Tiles - Determination of Tensile Adhesion Strength for Cementitious Adhesives (Incorporates Amendment A1: 1998)

CZ-CSN

CSN 62 1183-1981 Synthetic rubber latices Determination of coagulum content

European Committee for Standardization (CEN)

EN 666:1994 Resilient floor coverings - Determination of gelling
EN 1348:2007 Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives

ZA-SANS

SANS 5653:1972 Determination of heat shrinkage of elastomeric material

NO-SN

NS-EN 680-1994 Determination of the drying shrinkage of autoclaved aerated concrete

Lithuanian Standards Office

LST EN 1353-2000 Determination of moisture content of autoclaved aerated concrete
LST EN 680-2006 Determination of the drying shrinkage of autoclaved aerated concrete
LST EN ISO 15720:2002 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001)
LST EN 666-2002 Resilient floor coverings - Determination of gelling

PL-PKN

PN C04211-12-1989 Test methods of natural rubber latex Determination of coagulum content