Vinyl chloride sampling and testing reference

Vinyl chloride sampling and testing reference, Total:181 items.

The international standard classification for "Vinyl chloride sampling and testing reference" includes: Aliphatic hydrocarbons , Plastics pipes, fittings and valves , Thermoplastic materials , Workplace atmospheres , Bodies and body components , Plastics .

The Chinese standard classification for "Vinyl chloride sampling and testing reference" includes: Basic organic chemicals , Stomatologic device, equipment and material , Synthetic resin and plastic , Labor sanitation , Basic standards and general methods for synthetic resin and plastic , Automobile chassis and vehicle body in general .

中华人民共和国国家卫生和计划生育委员会

GBZ/T 300.78-2017 Determination of toxic substances in workplace air—Part 78: Vinyl chloride, dichloroethene,trichloroethene and tetrachloroethene

National Metrological Verification Regulations of the People's Republic of China

JJG 1125-2016 Verification Regulation of Vinyl Chloride Gas Monitors and Alarms

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7139-2002 Plastics--Vinyl chloride hompopolymers and copolymers--Determination of chlorine content
GB/T 7139-2023 Plastics—Vinyl chloride homopolymers and copolymers—Determination of chlorine content
GB/T 13289-1991 Ethylene for industrial use－Sampling in the liquid and the gaseous phase
GB/T 16087-1995 Workplace air―Determination of vinyl chloride―Direct injection gas chromatographic method(DNP)
GB/T 13289-2014 Ethylene for industrial use—Sampling in the liquid and the gaseous phase
GB/T 3402.2-2010 Plastics—Homopolymer and copolymer resins of vinyl chloride—Part 2:Preparation of test samples and determination of properties
GB/T 8804.2-2003 Thermoplastic pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly (vinyl chloride)(PVC-U), chlorinated poly (vinyl chloride)(PVC - C) and high-impac

Professional Standard - Hygiene

WS/T 156-1999 Workplace air. Determination of tetrachloroethylene. Passive sampling gas chromatographic method
WS/T 144-1999 Workplace air. Determination of trichloroethylene. Passive sampler gas chromatographic method

Group Standards of the People's Republic of China

T/CASMES 117-2022 Non-destructive testing—Penetrant testing—Standard reference photographs and display sizes
T/CRIAC 0001-2019 Reagent for infrared spectrum detection - Tetrachloroethylene
T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products

未注明发布机构

DIN 53381-1:1971 Testing of plastics; determination of thermostability of polyvinyl chloride (PVC); dehydrochlorination methods
DIN EN ISO 6259-2 E:2019-09 Determination of tensile properties of thermoplastic pipes Part 2: Unplasticized polyvinyl chloride (PVC-U), oriented unplasticized polyvinyl chloride (PVC-O), chlorinated polyvinyl chloride (PVC-C) and high strength Pipes made of polyvinyl chloride (PVC-
DIN 8080 E:2008-07 Chlorinated polyvinyl chloride (PVC-C) pipes PVC-C 250 - General quality requirements, testing
ASTM RR-D19-1197 2017 D8028-Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)
DIN 53774-2:1977 Testing of colouring materials in plastics; testing of colouring materials in unplasticized polyvinyl chloride moulding compounds; preparation of specimens

Professional Standard - Automobile

QC/T 1026-2016 Performance and Determination of PVC Slush Skin of Automotive Instrument Panel

国家质量监督检验检疫总局

SN/T 4440-2016 Determination of trichloroethylene and tetrachloroethylene in plastic and rubber products - Gas chromatongrahpy-mass spectrometry

Professional Standard - Commodity Inspection

SN/T 2402-2009 Determination of migration of dichloromethane and trichloroethylene in toys

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35262-2017 Characterisation and testing methods of recycled poly(vinyl chloride)(PVC)

PL-PKN

PN C89286-04-1989 Polyethylene Iow densffy Sampling and sample preparation for testing
PN C89291 ArkusZ10-1972 Polyvinyl chloride resins Determination of impurities and foreign ma??er
PN Z04112-10-1989 Air purity protection , Tests for vinyl chloride Determination of vinyl chloride in permanent residence area air by gas chromatography with sample enrichment
PN Z04112-06-1990 Air purity protection Tests for vinyl chloride Determination of vinyl chloride in ambient air (immission) by gas chromatography with sample enrichment
PN-EN ISO 6259-2-2021-03 E Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chlo
PN T90320-1992 Low-frequency telecommunication station and terminating cables with PVC insulation and PVC sheath . General requirements and tests
PN C89213-1991 Unplasticized poly (vinyl chloride) pipes and fittings. Determination of vicat softening temperature

GSO

OS GSO ISO/TR 19032:2013 Plastics – Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
BH GSO ISO/TR 19032:2016 Plastics – Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
GSO ISO/TR 19032:2013 Plastics – Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 24538:2013 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder
GSO ISO 6259-2:2015 Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)
OS GSO ISO 1158:2015 Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content
BH GSO ISO 6451:2016 Plastics coated fabrics -- Polyvinyl chloride coatings -- Rapid method for checking fusion
BH GSO ISO 1158:2016 Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content
GSO ISO 1158:2015 Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content
GSO ISO 6451:2015 Plastics coated fabrics -- Polyvinyl chloride coatings -- Rapid method for checking fusion
OS GSO ISO 24538:2013 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder
BH GSO ISO 24538:2016 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder
OS GSO ISO 6451:2015 Plastics coated fabrics -- Polyvinyl chloride coatings -- Rapid method for checking fusion

British Standards Institution (BSI)

PD ISO/TR 19032:2019 Plastics. Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
BS ISO 7382:2023 Ethylene for industrial use. Sampling in the liquid and the gaseous phase
BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
22/30452605 DC BS ISO 7382. Ethylene for industrial use. Sampling in the liquid and the gaseous phase
BS EN 14469-2:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Preparation of test specimens
BS EN ISO 24024-2:2021 Plastics. Homopolymer and copolymer resins of vinyl chloride. Preparation of test samples and determination of properties
BS EN ISO 1060-2:1999 Plastics - Homopolymer and copolymer resins of vinyl chloride - Preparation of test samples and determination of properties
BS EN ISO 6259-2:2020 Thermoplastics pipes. Determination of tensile properties - Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl…
BS EN ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content
BS EN ISO 24023-2:2020 Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1163-2:2000 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS 6346:1997 Electric cables. PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V
BS EN ISO 1163-2:1996 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Preparation of test specimens and determination of properties

SCC

BS PD ISO/TR 19032:2019 Plastics. Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
NS 9401:1994 Atlantic salmon - Reference sampling for quality measurements
AENOR UNE 53329-2:1978 Plastic materials. Determination of vinyl chloride in poly(vinyl chloride) resins, compounds and finished products, by gas chromatography.
DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...
NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
VDI 3493 BLATT 1-1982 Measuring gaseous emissions; Measuring vinyl chloride; Gas chromatographic method; Sampling with gas collection vessels
DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 6259-2:2020 Thermoplastics pipes – Determination of tensile properties – Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chl...
NS-EN ISO 6259-2:2020 Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chl...
DANSK DS/ISO 6259-2:2020 Thermoplastics pipes – Determination of tensile properties – Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chlo...
BS EN ISO 2898-2:2000 Plastics. Plasticized poly (vinyl chloride) (PVC-P) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS EN ISO 6401:2004 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer. Gas chromatographic method
DANSK DS/EN ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content
DANSK DS/CEN/TS 17100:2017 Non-destructive testing – Penetrant testing – Reference photographs and sizing of indications
UNE 212002-1:2003 Low-frequency cables and wires with PVC insulation and PVC sheath. Part 1: General test and measuring methods.
IEC 60189-1:1965 Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath - Part 1: General test and measuring methods
AS 3580.2.1:1990 Methods for sampling and analysis of ambient air, Method 2.1: Preparation of reference test atmospheres - Permeation tube method

RU-GOST R

GOST 25303-1992 Plastics. Vinyl chloride homopolymers and copolymers. Determination of chlorine
GOST 14043-1978 Polyvinylchloride and vinylchloride copolymers. Method for determination of moisture and volatile matters content
GOST 14040-1982 Polyvinylchloride and vinylchloride copolymers. Method for determination of viscosity number and K-value
GOST 25737-1991 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer. Gasochromatographic method

RO-ASRO

SR ISO 4451:1995 Polyethylene (PE) pipes and fittings - Determination of reference density of uncoloured and black polyethylenes
SR ISO 4451/C 1:1996 Polyethylene (PE) pipes and fittings - Determination of reference density of uncoloured and black polyethylenes
STAS 7308-1987 POLYVINYL CHLORIDE Determination of ash and sulphatated ash

YU-JUS

JUS H.B8.446-1989 Trichlorethylene for industrial use, stabilized. Detection of free chlorine
JUS H.B8.445-1989 Trichlorethylene for industrial use, stabilized and perchlorethylene for industrial use, stabilized. Measurement of pH-value. Potenciometric inethod
JUS G.S1.506-1988 Plastics. Vinyl chloride homopolymers and copolymers. Determination of chlorine
JUS H.B8.444-1989 Trichlorethvlene for industrial use, stabilized and perchlorethvlene for industrial use, stabilized. Determinaticn of densitv at 20 C. Hvdrometer method

International Organization for Standardization (ISO)

ISO/TR 19032:2019 Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO 6259-2:2020 Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vin
ISO 1158:1984 Plastics; Vinyl chloride homopolymers and copolymers; Determination of chlorine
ISO 1158:1978 Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine
ISO 22498:2005 Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mechanical sieving
ISO 13493:2021 Meat and meat products - Determination of chloramphenicol content - Reference method
ISO 6401:1985 Plastics; Homopolymer and copolymer resins of vinyl chloride; Determination of residual vinyl chloride monomer; Gas chromatographic method
ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content
ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings; Specification and determination of density

German Institute for Standardization

DIN 53743:1979 Testing of plastics; gaschromatographical determination of vinyl chloride (VC) in polyvinyl chloride (PVC)
DIN 53978:2005-03 Tetrachlorethylene - Specifications and tests
DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN 8080:2009 Chlorinated polyvinyl chloride (PVC-C) pipes - General quality requirements, testing
DIN 53742:1971 Testing of Plastics; Determination of the Vinyl Acetate Content of Copolymers of Vinyl Chloride and Vinyl Acetate; Infrared Spectrographic Method
DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN 53381-1:1983 Testing of plastics; determination of thermostability of polyvinyl chloride (PVC); dehydrochlorination methods
DIN 8080:2000 Chlorinated polyvinyl chloride (PVC-C) pipes PVC-C 250 - General quality requirements, testing
DIN EN ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998); German version EN ISO 1158:1998
DIN CEN/TS 17100:2017-11*DIN SPEC 19281:2017-11 Non-destructive testing - Penetrant testing - Reference photographs and sizing of indications; German version CEN/TS 17100:2017
DIN 53774-2:1986 Testing of colouring materials in plastics; testing of colouring materials in unplasticized polyvinyl chloride moulding compounds; preparation of specimens
DIN EN 478:1995 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Appearance after exposure at 150 °C - Test method; German version EN 478:1995

Korean Agency for Technology and Standards (KATS)

KS M ISO 7382-2002(2012) Ethylene for industrial use－Sampling in the liquid and the gaseous phase
KS M ISO 6259-2:2008 Thermoplastics pipes－Determination of tensile properties－Part 2：Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C) and high-impact poly(vinyl chloride)(PVC-HI)
KS M ISO 6259-2:2022 Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride)(PVC-U), oriented unplasticized poly(vinyl chloride)(PVC-O), chlorinated poly(vinyl
KS M ISO 6259-2-2008(2018) Thermoplastics pipes－Determination of tensile properties－Part 2：Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C) and high-impact poly(vinyl chloride)(PVC
KS M ISO 1158-2002(2017) Plastics－Vinyl chloride homopolymers and copolymers－Determination of chlorine content
KS M ISO 1158-2022 Plastics－Vinyl chloride homopolymers and copolymers－Determination of chlorine content
KS M ISO 1158:2002 Plastics-Vinyl chloride homopolymers and copolymers-Determination of chlorine content
KS M ISO 1158-2002(2022) Plastics－Vinyl chloride homopolymers and copolymers－Determination of chlorine content

BE-NBN

NBN C 32-501-1978 Cables and wires. Low frequency, polyvinyl chloride insulation, polyvinyl chloride enclosure, general method of trial and testing

Japanese Industrial Standards Committee (JISC)

JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 0305:1997 Methods for determination of trichloroethylene and tetrachloroethylene in flue gas
JIS K 6815-2:2002 Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)
JIS K 7380:1999 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of residual vinyl chloride monomer -- Gas chromatographic method
JIS K 7385:2002 Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content

HU-MSZT

MSZ 1636-1966 Solvent sampling and testing
MSZ 18808-1964 Rigid polyvinyl chloride test tube for firmness and dimensional stability
MSZ 19357/6-1982 Rigid polyvinyl chloride test tube for firmness and dimensional stability
MSZ 135/1-1981 Asphalt board. Sample collection and testing
MSZ 9433-1983 Biscuit sample collection, testing and classification
MSZ 8963/1-1982 Furniture sample collection and testing cabinets
MSZ 9441-1982 Ice cream and popsicle sample collection and testing
MSZ 8963/2-1982 Furniture sample collection and testing table

CZ-CSN

CSN 66 2740-1988 Ethylamines Sampling and methods of testing
CSN 66 1976-1988 Acrylic acid esters Sampling and methods of testing
CSN 65 6451-1981 Determlnatlon of ethylene, ropylene and adulterants gas hromatography

American Society for Testing and Materials (ASTM)

ASTM D5320-96 Standard Test Methods for Determination of 1,1,1-Trichloroethane and Methylene Chloride Content in Stabilized Trichloroethylene and Tetrachloroethylene
ASTM D4494-95(2000) Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene
ASTM UOP1035-19 Determination of Trace Chloromethane, Chloroethene, and Dichloromethane in Polymer Grade Ethylene and Propylene by Gas Chromatography Mass Spectrometry
ASTM D5320-96(2000) Standard Test Methods for Determination of 1,1,1-Trichloroethane and Methylene Chloride Content in Stabilized Trichloroethylene and Tetrachloroethylene (Withdrawn 2004)
ASTM D4494-95(2020) Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene
ASTM D4494-95(2015) Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene

European Committee for Standardization (CEN)

EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
EN ISO 6259-2:2020 Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chlori
PD CEN/TS 17100:2017 Non-destructive testing - Penetrant testing - Reference photographs and sizing of indications

Association Francaise de Normalisation

NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
NF EN ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Chlorine dosage
NF T31-311-2*NF EN 14469-2:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2 : preparation of test specimens
XP A09-012*XP CEN/TS 17100:2017 Non-destructive testing - Penetrant testing - Reference photographs and sizing of indications
XP CEN/TS 17100:2017 Non-destructive testing - Penetrant testing - Reference photographs and sizing of indications
NF T51-706:1986 Plastics. Homopolymer and copolymer resins of vinyl chlorid. Determination of residual vinyl chlorid monomer. Gas chromatographic method.

American National Standards Institute （ANSI)

ANSI/ASTM D5320:1996 Test Methods for Determination of 1,1,1-Trichloroethane and Methylene Chloride Content in Stabilized Trichloroethylene and Tetrachloroethylene
ANSI/ASTM D4494:1995 Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene

VN-TCVN

TCVN 7434-2-2004 Thermoplastics pipes.Determination of tensile properties.Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)

Danish Standards Foundation

DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DS/EN ISO 1158:1999 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content
DS/ISO 6259-2:2002 Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)

Lithuanian Standards Office

LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 6259-2:2020 Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chlori

AENOR

UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
UNE 212002-1:2014 Low-frequency cables and wires with PVC insulation and PVC sheath. Part 1: General test and measuring methods.

CL-INN

INDITECNOR 24-13ch-1962 Detonators: sampling, inspection and testing

ES-AENOR

UNE 53-329 Pt.1-1990 Determination of polyvinyl chloride in polyvinyl chloride polymers and composite materials by meteorological profile method

CH-SNV

SN EN ISO 6259-2:2021 Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chlori

IT-UNI

UNI EN ISO 6259-2:2020 Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chlori

CEN - European Committee for Standardization

EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination

SE-SIS

SIS SS-ISO 1158:1987 Plastics - Vinyl chloride homopolymers and copolymers- Determination of chlorine

Underwriters Laboratories (UL)

UL 510 CRD-2018 UL Standard for Safety Polyvinyl Chloride@ Polyethylene@ and Rubber Insulating Tape - Section / Paragraph Reference: 22. Storage Test Subject: Revised Test Method for the Storage Test (Edition 9: May 12@ 2017)

KR-KS

KS M ISO 6259-2-2022 Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride)(PVC-U), oriented unplasticized poly(vinyl chloride)(PVC-O), chlorinated poly(vinyl

CU-NC

NC 30-73-1988 Plastics Industry. Determination of pH from Aqueous Extract of. Poli-Vynil Chloride and Copolymers of Vynic Chloride. TesLing Method

FI-SFS

SFS-ISO 1158 E:1986 This standard is approved in English

AT-ON

OENORM EN ISO 6259-2:2021 Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized polyvinyl chloride PVC-U, oriented unplasticized polyvinyl chloride PVC-O, chlorinated poly vinyl chloride PVC-C and high-impact poly vinyl chloride PVC-HI IS

U.S. Military Regulations and Norms

ARMY MIL-C-12750 (1)-1955 CLIPS, SAMPLING AND DETECTOR TUBES (FOR CHEMICAL AGENT DETECTION)
ARMY MIL-C-12750-1953 CLIPS, SAMPLING AND DETECTOR TUBES (FOR CHEMICAL AGENT DETECTION)

Canadian General Standards Board （CGSB)

CGSB 1-GP-71 METH 82.3-1982 Paint and Pigment Testing Methods Vinyl Resin Analysis Poly (Vinyl Chloride) Dosage

GOSTR

GOST R 57827-2017 Standard test methods for detecting residual odor of drycleaning grade perchloroethylene

(U.S.) Ford Automotive Standards

FORD FLTM AK 002-1-2001 ACID ACCEPTANCE AND STABILITY TESTS FOR TRICHLORETHYLENE

Others: