Conductivity of water for injection

Conductivity of water for injection, Total:251 items.

The international standard classification for "Conductivity of water for injection" includes: Water for industrial use , Chemical analysis , Boilers and heat exchangers , Water of natural resources , Plastics in general , Thermoplastic materials , Thermosetting materials .

The Chinese standard classification for "Conductivity of water for injection" includes: Boiler and its auxiliary equipment , Chemical reagent in general , Basic standards and general methods for water treatment agent , Environmental pollutant monitoring methods , Basic standards and general methods for synthetic resin and plastic , Papermaking in general , Synthetic resin and plastic , Basic standards and general methods for surface active agent , Hydrogeological survey , Electric power testing technique .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2915-1999 Determination of conductivity of water extract of poly (vinyl chloride) resins
GB/T 41880-2022 Plastics—Epoxy resins—Determination of electrical conductivity of aqueous resin extracts
GB/T 6908-2018 Analysis of water used in boiler and cooling system—Determination of electrical conductivity
GB/T 7976-1987 Insulating paper and board--Determination of the electrical conductivity for the water extract
GB/T 15585-1995 Determination of shrinkage for injection moulding thermoplastics
GB 13580.3-1992 Determination of specific conductance in the wet precipitation
GB/T 6908-2005 Analysis of water used in boil and cooling system--The determination of electrical conductivity for water
GB/T 13580.3-1992 Determination of specific conductance in the wet precipitation
GB/T 7977-2007 Paper board and pulps—Determination of conductivity of aqueous extracts
GB/T 6908-1986 Methods for analysis of water for boiler and for cooling; The determination of electrical conductivity for water
GB/T 7977-1987 Paper board and pulps--Determination of the electrical conductivity for the water extract
GB/T 2915-2013 Determination of conductivity of water extract of polyvinyl chloride resins
GB/T 6908-2008 Analysis of water used in boil and cooling system-Determination of electrical conductivity
GB/T 12147-1989 Analysis of water used in boiler and cooling system-Determination of electrical conductivity of pure water

Professional Standard - Agriculture

1150药典二部-2020 Part 1 Eight Drawings of Water for Injection
169兽药典一部-2015 Varieties of the text Part 1 Bahua Water for Injection
2349药典二部-2010 Appendix Ⅷ S Determination of conductivity of pharmaceutical water
1090药典二部-2015 The first part eight pictures sterile water for injection
888药典二部-2010 Part 1 Eight Drawings of Water for Injection
1151药典二部-2020 The first part eight pictures sterile water for injection
352药典四部-2020 9000 Guiding Principles 9301 Guiding Principles for Application of Injection Safety Inspection Method
330药典四部-2015 9000 Guiding Principles 9301 Guiding Principles for Application of Injection Safety Inspection Method
889药典二部-2010 The first part eight pictures sterile water for injection
1089药典二部-2015 Part 1 Eight Drawings of Water for Injection

Professional Standard - Speciality

ZB G72002-1989 Determination of conductivity of water or aqueous solutions for surfactant tests

Professional Standard - Chemical Industry

HG/T 3506-1999 Surface active agents - Determination of electrical conductivity of water or aqueous solutions for tests

Taiwan Provincial Standard of the People's Republic of China

CNS 14639-2002 Methods of test for electric conductivity in highly purified water
CNS 15111-2007 Methods of test for electrical conductivity and resistivity of water

Professional Standard - Geology

DZ/T 0064.6-1993 Groundwater quality test methods - the determination of electrical conductivity

Professional Standard - Water Conservancy

SL/Z 699-2015 Technical guide for measurement and calculation of irrigation efficiency
SL 78-1994 Determination of conductivity (Conductivity instrument method)

Professional Standard - Ocean

HY/T 267-2018 Testing method of seawater conductivity measuring instrument

Professional Standard - Electricity

DL/T 1207-2013 Test Method for On-line Conductivity Measurement of Purity Water for Power Plant
DL/T 1201-2013 Test Method for On-line pH Measurement of Water of Low Conductivity for Power Plant

Professional Standard - Energy

NB/T 20655-2023 Commissioning Guidelines for Safe Injection Systems of Pressurized Water Reactor Nuclear Power Plants

Shanxi Provincial Standard of the People's Republic of China

DB14/T 1382-2017 Determination of Total Water-Soluble Salt in Saline Soil--Conductivity Method

Professional Standard - Machinery

JB 20005.1-2004 Glass infusion bottle washing machine

Professional Standard - Electron

SJ 1706-1981 Measurement of electron-beam transmission efficiency of power klystrons

Group Standards of the People's Republic of China

T/CPCIF 0244-2023 Low conductivity coolant for battery

CZ-CSN

CSN ON 83 0745-1964 Water for Injection
CSN 83 0520 Cast.25-1976 Physico-chemical analysis of drinking water. Determination of specific eleetrolytical conductivity
CSN 50 0363-1988 Pulp, páper and board. Specific conductivity of the water extract.

South African Bureau of Standard

SANS 440:1987 The production of water for injections
SANS 440:2008 Sterilized water for injections
SANS 5562:1987 Calcium and magnesium in water for injections, absence of
SANS 5392:1987 Acidity or alkalinity of water for injections, limit test
SANS 5968:1987 Nitrates in water for injections, limit test
SANS 8362-1:1989 Injection containers for injectables and accessories Part 1: Injection vials made of glass tubing
SANS 1233:1993 The production of a balanced solution of electrolytes for injection
SANS 5291:1987 Oxidizable matter in water for injections, limit test
SANS 596:1987 The production of compound sodium chloride intravenous infusion (Ringer's solution for injection)
SANS 597:1987 The production of compound sodium lactate intravenous infusion (Ringer-lactate solution for injection)

YU-JUS

JUS G.F1.050-1981 Rubber for medical and pharmaceutical uses. Rubber bottles closures, for conservated human blood, blood derivates, parentheral solutions and water for injections
JUS B.E4.095-1981 Bottles for conservated human blood, derivate of blood, parenteral solution and water for injections
JUS G.F1.050/1-1993 Rubber for medical and pharmaceutical ueses - Rubber bottles closures for conservated human blood, blood derivates, parentheral solutions and water injections - Amendments

HU-MSZT

MSZ 448/32.lap-1965 Drinking water conductivity definition

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE LO-09-091-2009 Emerging Applications in Cryogenics-Nitrogen Injection for Reservoir Enhanced Oil Recovery

GSO

BH GSO ISO 7888:2016 Water quality – Determination of electrical conductivity
OS GSO ISO 7888:2013 Water quality – Determination of electrical conductivity
GSO ISO 7888:2013 Water quality – Determination of electrical conductivity
GSO ISO 7886-2:2024 Sterile hypodermic syringes for single use — Part 2: Syringes for use with power-driven syringe pumps
GSO ISO 7886-2:2013 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
GSO ISO 21533:2015 Dentistry -- Reusable cartridge syringes intended for intraligamentary injections
BH GSO ISO 11608-4:2017 Pen-injectors for medical use -- Part 4: Requirements and test methods for electronic and electromechanical pen-injectors
OS GSO ISO 11608-4:2015 Pen-injectors for medical use -- Part 4: Requirements and test methods for electronic and electromechanical pen-injectors
GSO ISO 11608-4:2015 Pen-injectors for medical use -- Part 4: Requirements and test methods for electronic and electromechanical pen-injectors
OS GSO ISO 6587:2015 Paper, board and pulps -- Determination of conductivity of aqueous extracts
BH GSO ISO 6587:2016 Paper, board and pulps -- Determination of conductivity of aqueous extracts
OS GSO ISO 14436:2013 Pulps - Standard tap water for drainability measurements - Conductivity 40 mS/m to 150 mS/m
GSO ISO 14436:2013 Pulps - Standard tap water for drainability measurements - Conductivity 40 mS/m to 150 mS/m
GSO ISO 6587:2015 Paper, board and pulps -- Determination of conductivity of aqueous extracts
BH GSO ISO 14436:2016 Pulps - Standard tap water for drainability measurements - Conductivity 40 mS/m to 150 mS/m

Association Francaise de Normalisation

NF EN 27888:1994 Water quality - Determination of electrical conductivity
NF T90-031*NF EN 27888:1994 Water quality - Determination of electrical conductivity.
NF EN ISO 7886-2:2020 Seringues hypodermiques stériles, non réutilisables - Partie 2 : seringues pour pousse-seringues électriques
NF S93-001-2*NF EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2 : syringes for use with power-driven syringe pumps
NF S93-111:1993 Injection containers for injectables and accessories. Part 2 : closures for injection vials.
NF S91-184:2004 Dentistry - Reusable cartridge syringes intented for intraligamentary injections.
NF S93-020-4*NF EN ISO 11608-4:2007 Pen-injectors for medical use - Part 4 : requirements and test methods for electronic and electromechanical pen-injectors.
NF S93-110-2:2010 Injection containers and accessories - Part 2 : closures for injection vials.
NF S93-130-1*NF EN ISO 9187-1:2010 Injection equipment for medical use - Part 1 : ampoules for injectables
NF S91-184*NF EN ISO 21533:2018 Dentistry - Reprocessable cartridge syringes for intraligamentary injections
NF S93-006-6*NF ISO 11040-6:2019 Prefilled syringes - Part 6 : plastic barrels for injectables and sterilized subassembled syringes ready for filling
NF S93-006-4*NF ISO 11040-4:2015 Prefilled syringes - Part 4 : glass barrels for injectables and sterilized subassembled syringes ready for filling

Korean Agency for Technology and Standards (KATS)

KS I ISO 7888-2007(2017) Water quality－Determination of electrical conductivity
KS I ISO 7888:2007 Water quality－Determination of electrical conductivity
KS B ISO 2975-3-2014(2019) Measurement of water flow in closed conduits — Tracer methods — Part 3: Constant rate injection method using radioactive tracers
KS I 3201-2007 Testing methods for electric conductivity in highly purified water
KS P ISO 21533:2011 Dentistry-Reusable cartridge syringes intended for intraligamentary injections
KS M ISO 6587:2018 Paper, board and pulps — Determination of conductivity of aqueous extracts
KS P ISO 8362-3:2009 Injection containers and accessories－Part 3：Aluminium caps for injection vials
KS P ISO 11040-6-2023 Prefilled syringes — Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling

KR-KS

KS I ISO 7888-2023 Water quality — Determination of electrical conductivity
KS C 3001-1983(2023) Conductivity of electrical copper material
KS I 3201-2023 Testing methods for electric conductivity in highly purified water
KS P ISO 21533-2017 Dentistry－Reusable cartridge syringes intended for intraligamentary injections
KS P ISO 7886-2-2022 Sterile hypodermic syringes for single use — Part 2: Syringes for use with power-driven syringe pumps
KS M ISO 6587-2018 Paper, board and pulps — Determination of conductivity of aqueous extracts

CL-INN

INDITECNOR 62-8 Industrial water: testing, measurement of conductivity

German Institute for Standardization

DIN EN 27888:1993 Water quality; determination of electrical conductivity (ISO 7888:1985); German version EN 27888:1993
DIN 53779:1979 Determination of the electric conductivity and the specific resistance (resistivity) of aqueous extracts
DIN EN 27888:1993-11 Water quality; determination of electrical conductivity (ISO 7888:1985); German version EN 27888:1993
DIN EN ISO 7886-2 E:2019-06 Sterile hypodermic syringes for single use Part 2: Syringes for use with electric syringe pumps (Draft)
DIN EN ISO 8362-3:2003-10 Injection containers for injectables and accessories - Part 3: Aluminium caps for injection vials (ISO 8362-3:2001); German version EN ISO 8362-3:2003; German and English texts
DIN 13989:2013 Dentistry - Syringes without lever for intraligamental injections
DIN 13989 E:2012-10 Dentistry - Syringes without lever for intraligamental injections
DIN EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
DIN EN 15976:2011-07 Flexible sheets for waterproofing - Determination of emissivity; German version EN 15976:2011
DIN ISO 11040-6:2021 Prefilled syringes - Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling (ISO 11040-6:2019)
DIN EN ISO 11608-4:2007 Pen-injectors for medical use - Part 4: Requirements and test methods for electronic and electromechanical pen-injectors (ISO 11608-4:2006); English version of DIN EN ISO 11608-4:2007-11
DIN EN ISO 21533:2003 Dentistry - Reusable cartridge syringes intended for intraligamentary injections (ISO 21533:2003); German version EN ISO 21533:2003
DIN EN ISO 7886-2:2020-10 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020); German version EN ISO 7886-2:2020
DIN EN ISO 21533:2018-04 Dentistry - Reprocessable cartridge syringes for intraligamentary injections (ISO 21533:2018); German version EN ISO 21533:2018
DIN ISO 11040-4:2017-07 Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling (ISO 11040-4:2015)
DIN ISO 11040-4 E:2017-02 Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
DIN ISO 11040-6:2021-05 Prefilled syringes - Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling (ISO 11040-6:2019)

SCC

DANSK DS/ISO 7888:1994 Water quality – Determination of electrical conductivity
BS EN ISO 7886-2:1997 Sterile hypodermic syringes for single use-Syringes for use with power-driven syringe pumps
NS 4721:1973 Water analysis — Determination of conductivity
NS-EN 27888:1993 Water quality — Determination of electrical conductivity (ISO 7888:1985)
DANSK DS/EN 27888:2003 Water quality - Determination of electrical conductivity (ISO 7888:1985)
AWWA ACE99466 Evaluation of Potential Public Water Supply Sites Using Electromagnetic Conductance and Resistivity Equipment
BS 1619-2:1982 Re-usable hypodermic syringes for insulin injection.-Specification for syringes for use with insulin of strength 100 units per millilitre
NS-EN ISO 7886-2:1997 Sterile hypodermic syringes for single use — Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1996)
DANSK DS/EN ISO 7886-2:2020 Sterile hypodermic syringes for single use – Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
BS ISO 22519:2019 Purified water and water for injection pretreatment and production systems
AWWA ACE54446 Elevating the Focus on Water Loss, Water Efficiency and Demand Management
BS 1619-1:1962 Re-usable hypodermic syringes for insulin injection-Specification for syringes for use with insulin of strengths 20, 40 and 80 units per millilitre
NS-EN 15976:2011 Flexible sheets for waterproofing — Determination of emissivity
DANSK DS/EN 15976:2011 Flexible sheets for waterproofing - Determination of emissivity
AWWA JAW10126 Journal AWWA — Modeling Copper Corrosion in Water With Low Conductivity by Using Electrochemical Techniques
IEC 60111:1983 Resistivity of commercial hard-drawn aluminium electrical conductor wire
DIN ISO 8362-6:1993 Injection containers for injectables and accessories; caps made of aluminium-plastics combinations for injection vials; identical with ISO 8362-6:1992
DANSK DS/EN ISO 11608-4:2007 Pen-injectors for medical use – Part 4: Requirements and test methods for electronic and electromechanical pen-injectors
BS 1977:1963 Copper for electrical purposes tubes(high conductivity)
DIN 13989 E:2012 Draft Document - Dentistry - Syringes without lever for intraligamental injections
BS 1977:1953 Copper for electrical purposes tubes(high conductivity)
AENOR UNE-EN ISO 21533:2004 Odontology. Reusable syringes for intra-ligament injections (ISO 21533:2003)
DIN EN 15976 E:2009 Draft Document - Flexible sheets for waterproofing - Determination of emissivity; German version prEN 15976:2009
DANSK DS/ISO 7886-2:2020 Sterile hypodermic syringes for single use – Part 2: Syringes for use with power-driven syringe pumps
DANSK DS/ISO 11040-6:2019 Prefilled syringes – Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling
DANSK DS/ISO 11040-4:2015 Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
AWWA ACE71091 Effects of Alkalinity on Galvanic Corrosion of Lead Solder in Low Conductivity Waters

Japanese Industrial Standards Committee (JISC)

JIS K 0400-13-10:1999 Water quality -- Determination of electrical conductivity
JIS T 3246:2011 Catheters designed for injection of contrast media (Non-vascular use)
JIS T 3246:2005 Catheters designed for injection of contrast media (Non-vascular use)
JIS K 0552:1994 Testing methods for electric conductivity in highly purified water
JIS K 0130:2008 General rules for electrical conductivity measuring method

International Organization for Standardization (ISO)

ISO 7888:1985 Water quality; Determination of electrical conductivity
ISO 22519:2019 Purified water and water for injection pretreatment and production systems
ISO 22519:2023 Membrane-based generation of water for injection (WFI)
ISO 11040-6:2019 Prefilled syringes — Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling
ISO 21533:2003 Dentistry - Reusable cartridge syringes intended for intraligamentary injections
ISO 11608-4:2006 Pen-injectors for medical use - Part 4: Requirements and test methods for electronic and electromechanical pen-injectors
ISO 7886-2:1996 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
ISO 6587:1980 Paper, board and pulps — Determination of conductivity of aqueous extracts
ISO/FDIS 11040-4:2024 Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
ISO 8362-3:1989 Injection containers for injectables and accessories; part 3: aluminium caps for injection vials

SE-SIS

SIS 02 81 23-1974 Determination of conductivity of water

British Standards Institution (BSI)

BS ISO 22519:2023 Membrane-based generation of water for injection (WFI)
BS EN 27888:1993 Water quality. Method for the determination of electrical conductivity
22/30450631 DC BS ISO 22519. Membrane based generation of WFI
BS EN ISO 11608-4:2007 Pen-injectors for medical use - Requirements and test methods for electronic and electromechanical pen-injectors
19/30380622 DC BS EN ISO 7886-2. Sterile hypodermic syringes for single use. Part 2. Syringes for use with power-driven syringe pumps
BS EN 62132-4:2006 Integrated circuits - Measurement of electromagnetic immunity - 150 kHz to 1 GHz - Direct RF power injection method
BS EN ISO 8362-3:2003 Injection containers and accessories - Aluminium caps for injection vials
BS EN ISO 7886-2:1996 Sterile hypodermic syringes for single use. Syringes for use with power-driven syringe pumps
BS EN ISO 21533:2003 Dentistry - Reusable cartridge syringes intended for intraligamentary injections
BS ISO 11040-6:2019 Prefilled syringes. Plastic barrels for injectables and sterilized subassembled syringes ready for filling
BS EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Syringes for use with power-driven syringe pumps
BS ISO 11040-4:2015+A1:2020 Prefilled syringes. Glass barrels for injectables and sterilized subassembled syringes ready for filling
BS ISO 11040-4:2024 Prefilled syringes - Glass barrels for injectables and sterilized subassembled syringes ready for filling
BS EN 17190:2018 Flexible sheets for waterproofing. Solar Reflectance Index
BS ISO 6587:2021 Paper, board and pulps. Determination of conductivity of aqueous extracts
BS EN ISO 21533:2018 Dentistry. Reprocessable cartridge syringes for intraligamentary injections
BS ISO 22007-7:2023 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient measurement of thermal effusivity using a plane heat source
BS EN ISO 11608-4:2022 Needle-based injection systems for medical use. Requirements and test methods. Needle-based injection systems containing electronics

American Society for Testing and Materials (ASTM)

ASTM D1125-23 Standard Test Methods for Electrical Conductivity and Resistivity of Water
ASTM E261-16(2021) Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
ASTM D1125-95(2009) Standard Test Methods for Electrical Conductivity and Resistivity of Water
ASTM D1125-14 Standard Test Methods for Electrical Conductivity and Resistivity of Water
ASTM D1125-95(2005) Standard Test Methods for Electrical Conductivity and Resistivity of Water
ASTM D5391-23 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM E262-13 Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques
ASTM D5464-93(2001) Standard Test Methods for pH Measurement of Water of Low Conductivity
ASTM D5128-14(2022) Standard Test Method for On-Line pH Measurement of Water of Low Conductivity

Society of Automotive Engineers (SAE)

SAE J1113/3-2010 Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power
SAE J1113/3-1995 Conducted Immunity, 250 kHz to 5000 MHz, Direct Injection of radio Frequency (RF) Power

SAE - SAE International

SAE J1113-3-2010 Electromagnetic Susceptibility Test Procedures for Vehicle Components (Except Aircraft)
SAE J1113-3-2006 Conducted Immunity@ 250 kHz to 400 MHz@ Direct Injection of Radio Frequency (RF) Power
SAE J1113-3-1995 Conducted Immunity@ 250 kHZ to MHz@ Direct Injection of Radio Frequency (RF) Power@ Standard

AT-ON

ONORM M 6241-1988 Water quality; determination of electrica! conductivity
ONORM M 5883-1999 Measurement of the conductivity of water and waste water - Continuous method
ONORM EN 27888-1993 Water quality. Determination of electrical conductivity (ISO 7888:1985)

Military Standards (MIL-STD)

DOD A-A-54828-1993 SYRINGE, HYPODERMIC, ANGIOGRAPHIC INJECTOR
DOD A-A-54840-1993 SYRINGE, HYPODERMIC, GLASS
DOD A-A-54676-1992 SYRINGE AND NEEDLE, HYPODERMIC, DISPOSABLE, TUBERCULIN

European Committee for Standardization (CEN)

EN 27888:1993 Water quality; determination of electrical conductivity (ISO 7888:1985)
EN 28362-3:1993 Injection Containers for Injectables and Accessories - Part 3: Aluminium Caps for Injection Vials (ISO 8362-3 : 1989)
EN ISO 21533:2003 Dentistry - Reusable cartridge syringes intended for intraligamentary injections
EN ISO 11608-4:2007 Pen-injectors for medical use - Part 4: Requirements and test methods for electronic and electromechanical pen-injectors
EN ISO 11608-4:2022 Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics (ISO 11608-4:2022)
EN 28362-1:1993 Injection Containers for Injectables and Accessories - Part 1. Injectable Vials Made of Glass Tubing (ISO 8362-1 : 1989)
EN ISO 7886-2:1997 Sterile Hypodermic Syringes for Single Use - Part 2: Syringes for Use with Power-Driven Syringe Pumps
EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
EN 28362-4:1993 Injection Containers for Injectables and Accessories - Part 4: Injection Vials Made of Moulded Glass (ISO 8362-4 : 1989)

Spanish Association for Standardization (UNE)

UNE-EN 27888:1994 WATER QUALITY. DETERMINATION OF ELECTRICAL CONDUCTIVITY. (ISO 7888:1985).
UNE-EN ISO 7886-2:1998 STERILE HYPODERMIC SYRINGES FOR SINGLE USE. PART 2: SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS. (ISO 7886-2:1996).
UNE-EN 15976:2011 Flexible sheets for waterproofing - Determination of emissivity
UNE 57124:1983 PAPER, BOARD AND PULPS. DETERMINATION OF CONDUCTIVITY OF AQUEOUS EXTRACTS
UNE 77079:2002 Water quality. Technical specifications of general character for continuous conductivity measurements instruments in industrial wastes.
UNE-ISO 6587:2008 Paper, board and pulps. Determination of conductivity of aqueous extracts.
UNE 53-196-1988 Determination of thermal conductivity of non-elastomeric polyvinyl chloride injection fittings for pipes
UNE-ISO 6587:2008 ERRATUM:2008 Paper, board and pulps. Determination of conductivity of aqueous extracts.
UNE-EN ISO 21533:2018 Dentistry - Reprocessable cartridge syringes for intraligamentary injections (ISO 21533:2018) (Endorsed by Asociación Española de Normalización in March of 2018.)
ISO/DIS 11040-4:2023 Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
UNE-EN ISO 21533:2004 Dentistry - Reusable cartridge syringes intended for intraligamentary injections (ISO 21533:2003)

NL-NEN

NEN-ISO 7888:1994 Water quality.Determination of electrical conductivity(ISO 7888:1985)
NEN 6591-1990 Rainwater- Determination of electrical conductivity by continuous flow analysis

Danish Standards Foundation

DS/EN 27888:2003 Water quality - Determination of electrical conductivity (ISO 7888:1985)
DS/EN ISO 7886-2:1998 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
DS/EN 15976:2011 Flexible sheets for waterproofing - Determination of emissivity
DS/EN ISO 11608-4:2007 Pen-injectors for medical use - Part 4: Requirements and test methods for electronic and electromechanical pen-injectors
DS/EN ISO 21533:2003 Dentistry - Reusable cartridge syringes intended for intraligamentary injections
DS/EN ISO 8537:1994 Sterile single-use syringes,with or without needle, for insulin

Lithuanian Standards Office

LST EN 27888-1999 Water quality - Determination of electrical conductivity (ISO 7888:1985)
LST EN ISO 7886-2:2001 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1996)
LST EN 15976-2011 Flexible sheets for waterproofing - Determination of emissivity
LST EN ISO 21533:2004 Dentistry - Reusable cartridge syringes intended for intraligamentary injections (ISO 21533:2003)

IT-UNI

UNI EN ISO 7886-2:2021 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps

GOSTR

GOST R ISO 7886-2-2017 Sterile hypodermic syringes for single use. Part 2. Syringes for use with power-driven syringe pumps

CH-SNV

SN EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)

BE-NBN

NBN-EN 27888-1994 Water quality. Determination of electrical conductivity (ISO 7888: 1985)

PL-PKN

PN-EN ISO 7886-2-2020-11 E Sterile hypodermic syringes for single use -- Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)

IN-BIS

IS 9403-1980 Methods for testing thermal conductivity and transmittance of assemblies using protective heat boxes

Indonesia Standards

SNI 06-6989.1-2004 Water and waste water - Part 1: Test methods of electrical conductivity
SNI 04-1900-1990 Refill water for storage batteries

Standard Association of Australia （SAA）

AS 1077:1973 Single-use syringes (sterile) for insulin injection
AS 1094.1:2004/Amdt 1:2005 Single use sterile hypodermic syringes Manual use syringes

API - American Petroleum Institute

API PAPER-906-14-K-1969 WATERFLOOD CORRELATION TO FORECAST RATE AND RESERVES

American Society of Civil Engineers (ASCE)

ASCE 50-08/51-08-2008 Standard Guideline for Fitting Saturated Hydraulic Conductivity Using Probability Density Functions; Standard Guideline for Calculating the Effective Saturated Hydraulic Conductivity

ESDU - Engineering Sciences Data Unit

ESDU 78039-1978 Thermal conductivity of ice@ water and steam.

CEN - European Committee for Standardization

EN ISO 21533:2018 Dentistry - Reprocessable cartridge syringes for intraligamentary injections

GM Europe

GME B 040 1279-1994 Steam Jet Cleaning Agent, Liquid with Low Conductivity (German)

RO-ASRO

STAS 8890-1980 Electrical insulating paper and board DETERMINATION OF CONDUCTIVITY OF AQUEOUS EXTRACT
STAS 8972/3-1981 Hydrometry DILUTION METHOD FOR MEASUREMENT OF STEADY WATER FLOW Constant-rate injection method

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE N42.31-2003 Measurement Procedures for Resolution and Efficiency of Wide-Bandgap Semiconductor Detectors of Ionizing Radiation

PT-IPQ

NP 3190-1987 Paper, board and pulps Determination of conductivity of aqueous extracts

TR-TSE

TS 2950-1978 Measurement Of Water Flow In Closed Conduits - Tracer Methods Part III: Constant Rate Injection Method Using Radioactive Tracers

WRC - Welding Research Council

BULLETIN 357-1990 CALCULATION OF ELECTRICAL AND THERMAL CONDUCTIVITIES OF METALLURGICAL PLASMAS

American Welding Society (AWS)

WRC 357:1990 Calculation of Electrical and Thermal Conductivities of Metallurgical Plasmas

Others: Nitrates in Water for Injections