Standard values for testing instruments

Standard values for testing instruments, Total:256 items.

The international standard classification for "Standard values for testing instruments" includes: Aircraft and space vehicles in general , Measurement of force, weight and pressure , Optics and optical measurements , Non-destructive testing , Optical measuring instruments , Exploratory and extraction equipment , Equipment for petroleum and natural gas industries , Mining and quarrying , Geology. Meteorology. Hydrology , Cereals, pulses and derived products , Mechanical testing , Horology in general .

The Chinese standard classification for "Standard values for testing instruments" includes: Technical management , Mechanics Measurement , Optical Measurement , Length Measurement , Radio Measurement , Ultrasonic wave and sound radiation defectoscope , X ray, magnetic powder, fluorescent light and other defectoscope , Telescope, geodetic survey and aerial survey instrumentation , Other electric appliances , Petroleum geology exploration , Petroleum exploration, development, gathering and transportation equipment in general , Nontechnical ore survey , Hydrology and water conservancy instrument , Grain processing and products , Force and deformation test instrument , Horology .

机械工业部

JB/T 7395.5-1994 Electrical measuring instruments terminology standard, detector, stable power supply and comparative measuring instrument

Professional Standard - Aerospace

QJ 3081-1999 Standard for Management, Inspection, Audit and Evaluation of Instruments and Meters

National Metrological Verification Regulations of the People's Republic of China

JJG 922-1996 Verification Regulation of The Standard Device of Vertex Power for Refractometers
JJG 922-2008 Verification Regulation of Standard Devices of Vertex Power for Eye Refractometers
JJG(交通) 015-1999 Verification Regulation of Headlamp for Vehicle Tester's Aligner
JJG 557-2011 Standard Torque-meters
JJG(烟草) 26-2010 Verification Regulation of Expanded Stem Filling Value Tester
JJG(纺织) 044-1991 Verification Regulations for Capacitive Evenness Meter Metrology Verification Standard Device
JJG 1001-2005 Verification Regulation of Calibrators for Near Headlamp Tester of Motor Vehicle
JJG(烟草)26-2010 Verification Regulation of Expanded Stem Filling Value Tester
JJG 451-1986 Standardmeter for Store Liquid
JJG 26-2010 Verification rules for measuring instrument for filling value of expanded stems
JJG 144-2007 Verification Regulation of Standard Dynamometers
JJG 25-2010 Verification rules for cut tobacco filling value tester
JJG 967-2015 Calibrators for Headlamp Tester of Motor Vehicle
JJG 967-2001 Verification Regulation of Calibrators for Headlamp Tester of Motor Vehicle
JJG 887-2014 Standard Tapered Roller Tester
JJG(烟草) 25-2010 Verification Regulation of Cut Tobacco Filling Value Tester
JJG(石油) 21-1996 Verfication Regulation of Geophone Tester
JJG(地质) 1024-1994 Standard Verification Regulations for Compaction Apparatus
JJG 278-2002 Verification Regulation of Oscilloscope Calibrator
JJG(烟草)25-2010 Verification Regulation of Cut Tobacco Filling Value Tester
JJG 887-1995 Verivication Regulation of Standard Tapered Roller Tester
JJG 144-1992 Verification Regulation for Standard Dynamometers

Professional Standard - Ocean

HY/T 207-2016 Standard system for product and test of marine instrument and equipment

Professional Standard - Ferrous Metallurgy

YB/T 081-2013 Rule for Rounding Off of Numberical Values and Judgement of Testing Values for Technical Standards of Metallurgy
YB/T 081-1996 Rule for rounding off of numberical values and judgement of testing values for technical standards of metallurgy

Professional Standard - Building Materials

JC/T 728-1982 Apparatus for physical test of cement.Standard sieve for testing fineness
JC/T 727-1982(1996) Apparatus for physical test of cement.Apparatus for testing normal consistency and setting time of paste

Professional Standard - Machinery

JB/T 11601-2013 Non-destructive testing instrument － Visual testing Equipment
JB/T 11779-2014 Non-Destructive Testing Instrument - Specifications for Phased Array Ultrasonic Testing Instruments
JB/T 11259-2011 Non-destructive testing instrument —Multifrequency eddy current testing equipment
JB/T 5754-2011 Non-destructive testing instruments —Specifications for one-channel acoustic emission testing instrument
JB/T 12455-2015 Nondestructive testing instruments―Swept frequency eddy current testing instrument
JB/T 8759-1998 Stereotyped commands of programmable measuring apparatus
JB/T 7586-1994 Partial Discharge Detectors Calibrator of Apparent Discharge
JB/T 11605-2013 Non-destructive testing instruments — Metal magnetic memory instrument - technical requirments
JB/T 12454-2015 Nondestructive testing instruments-Swept frequency acoustical testing instrument
JB/T 11277-2012 Non-destructive testing instruments — Single channel acoustic impedance instrument
JB/T 11611-2013 Non-destructive testing instrument — Eddy current and magnetic memory integrated testing instrument
JB/T 5525-2011 Non-destructive testing instruments —characteristics measured method for one-channel eddy current testing instrument
JB/T 12457-2015 Non-destructive testing instruments-Testing method of X-ray delector for circuit board detection
JB/T 9315-1999 Geodetic instuments-Levelling staffs
JB/T 11780-2014 Non-destructive Testing Instrument - Characterization and Verification of Array Eddy Current Testing Instrument
JB/T 11612-2013 Non-destructive testing instrument — Eddy current and magnetic flux leakage integrated testing instrument
JB/T 12456-2015 Non-destructive testintg instruments-Technical requirements of X-ray delector for circuit board detection
JB/T 11260-2011 Non-destructive testing instruments — Acoustic pulse reflectometry instrument
JB/T 11604-2013 Non-destructive testing instruments — Ultrasonic thickness gauge
JB/T 11609-2013 Non-destructive testing instrument － Acoustic impact testing instrument
JB/T 8428-1996 Calibration of standard test blocks for ultrasonic testing instruments of steel welds
JB/T 11610-2013 Non-destructive testing instrument — Specifications for digital ultrasonic testing instruments
JB/T 12458-2015 Non-destructive testing instruments - - Multi-channel digital ultrasonic testing instrument

Professional Standard - Petroleum

SY/T 6493-2000 Specification for value transfer in nuclear well logging tools
SY 6493-2000 Nuclear logging tool value transfer procedure
SY 6639-2012 Geophone Tester Calibration Method
SY/T 6639-2005 The calibration method of geophone tester
SY 7081-2016 Calibration method of calibration device of geophone tester
SY/T 7081-2016 Calibrating method for calibration device of geophone tester
SY/T 6639-2012 Calibration Method for Geophone Tester

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13634-2008 Calibration of force-proving instruments used for the verification of uniaxlial testing machines
GB/T 29405-2012 Inspection of grain and oils—Determination of fat acidity of cereal and cereal products—Instrumental analysis method
GB/T 14480.1-2015 Non-destructive testing instruments―Equipment for eddy current examination―Part 1:Instrument characteristics and verification
GB/T 4028-1994 Timekeeping instruments-Symbolization of control positions
GB/T 3412.1-2009 Instrument for dam monitoring—Readout unit—Part 1:Readout unit for vibrating wire type transducer
GB/T 4028-2013 Symbolization of Control Positions for Timekeeping Instruments
GB/T 26832-2011 Non-destructive testing instruments - Specifications for the wire rope electromagnetic tester

冶金工业部

YB/T 0081-1996 Numerical rounding of metallurgical technical standards and determination principles of testing values

工业和信息化部

JB/T 13935-2020 Nondestructive testing instrument - UltrasonicUltrasonic time-of-flight diffraction testing instrument
JB/T 13941-2020 Nondestructive testing instrument - Remote-field eddy current testing equipment
JB/T 13937-2020 Nondetructive testing instrument -Laser ultrasonic visualizing inspector
JB/T 13940-2020 Nondestructive instruments - Eddy current electrical conductivity gauge
JB/T 13939-2020 Nondestructive testing instruments - Eddy current thickness gauge

未注明发布机构

ANSI N317-1980(R1991) Performance Criteria for Instrumentation Used for Inplant Plutonium Monitoring
DIN ISO 3158 E:2017-07 Timekeeping instruments - Symbolization of control positions
ANSI/ISA TR92.06.03-2008(2013) Feasibility of Chlorine Detection Instrument Testing

Group Standards of the People's Republic of China

T/CMA JD006-2019 Calibrators for Headlamp Tester of Motor Vehicle
T/JAS 24-2024 Inspection body and laboratory-Spectification for Verification and Calibration of Instruments and Equipment
T/HNIMA 001-2023 Calibration method for liquid chromatograph with charged aerosol detector
T/ZFB 0003-2019 Apparatus method for testing the relative hand value of textiles

National Metrological Technical Specifications of the People's Republic of China

JJF(纺织) 034-2006 Calibration specification for measurement verification standard of capacitive dryness meter
JJF 1281-2011 Calibration Specification for Cut Tobacco Filling Power Tester
JJF 1941-2021 Calibration Specification for Material Measures of Length Measuring Instrument with Optical Principle
JJF(纺织)034-2012 Calibration Specification for the Metrological Verification Standard of Textile Yarn Evenness Tester—Capacitance Method
JJF(纺织) 034-2012 Calibration Specification for the Metrological Verification Standard of Textile Yarn Evenness Tester.Capacitance Method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33887-2017 Non-destructive testing instruments--Industrial optical fiber endoscope detector
GB/T 33889-2017 Non-destructive testing instrument--Specification for eddy current-magnetic flux leakage integrated instrument
GB/T 33886-2017 Non-destructive testing instruments--Industrial electronic endoscopic detector

Sichuan Provincial Standard of the People's Republic of China

DB51/T 2160-2016 Guidelines for Periodic Inspection of Laboratory Testing Instruments and Standard Materials

Taiwan Provincial Standard of the People's Republic of China

CNS 8461-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Unknown One - Sided)
CNS 8459-1983 Significance Test of Difference Between the Population Mean and the Standart (Standard Deviation Known ,One - Sided)
CNS 8460-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Known, Two - Sided)
CNS 8462-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Unknown ,Two -Sided)

工业和信息化部/国家能源局

JB/T 10046-2017 Limits and n;est0eent methods of noise fog machine tool electrical apparatus
JB/T 13150-2017 Nondestructive testing instrument. Variable array probe for eddy current testing instrument

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40023-2021 Non-destructive testing instruments - Ultrasonic time-of-flight diffraction instrument - Technical requirements
GB/T 13634-2019 Metallic materials—Calibration of force-proving instruments used for the verification of uniaxial testing machines
GB/T 39849-2021 Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests

Professional Standard - Nuclear Industry

EJ/T 522-1990 Quality standards for maintenance and commissioning of radiation protection equipment for uranium mining and metallurgy

CH-SNV

SN 214 051-1984 Testing of metallic materials; hardness fest on welds;Transverse sections of joint weldsGrundlage der vorliegenden Norm ist die Deutsche NormDIN 50163, Teil l (siehe Erl?uterungen).

CN-STDBOOK

图书 3-9454 Compilation of Standards for Nondestructive Testing Instruments (Part 1)
图书 3-9455 Compilation of Standards for Nondestructive Testing Instruments (Part 2)

SCC

NS 1563:1972 ISO system for limits and fits — Inspection limits for indicating measuring instruments
DIN VDE 0493 Supplement 1:2006 Radiation protection instrumentation - Supplement 1: Detection limit and decision threshold for ionizing radiation measurements - Directions on the application of the standards series ISO 11929 and DIN 25482
UL 920401-2017 Standard for Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
CISPR 5:1967 Radio interference measuring apparatus having detectors other than quasi-peak
CSA C22.2 No.152-1976 Combustible Gas Detection Instruments
CSA C22.2 No.152-M1984-1984(R2016) Combustible Gas Detection Instruments

ZA-SANS

SANS 1698:2007 Verification standards for the verification of volume-measuring instruments, including commercial standards of volume
SANS 1697:2007 Verification standards for the verification of mass-measuring instruments, including commercial standard masspieces

American Society for Testing and Materials (ASTM)

ASTM E499/E499M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM E4-08 Standard Practices for Force Verification of Testing Machines
ASTM E499-95(2000) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM E499/E499M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM E4-09 Standard Practices for Force Verification of Testing Machines
ASTM E4-09a Standard Practices for Force Verification of Testing Machines
ASTM D6543-00(2012) Standard Guide to the Evaluation of Measurements Made by On-Line Coal Analyzers
ASTM E1324-00 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Examination Instruments
ASTM E1324-21 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
ASTM E74-04 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM F2401-16 Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
ASTM E2439-09(2016) Standard Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM D6318-24 Standard Practice for Calibrating a Fathometer Using a Bar Check Method
ASTM E2439-05 Standard Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM E2852-13(2021) Standard Guide for Acquisition, Maintenance, Storage, and Use of Hazardous Material Detection Instrumentation
ASTM E1324-16 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
ASTM D6620-00 Standard Practice for Asbestos Detection Limit Based on Counts
ASTM E317-94 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse- Echo Examination Instruments and Systems Without the Use of Electronic Measurement Instruments
ASTM E2491-23 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
ASTM E123-02(2024) Standard Specification for Apparatus for Determination of Water by Distillation
ASTM D5142-02 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM F78-97 Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
ASTM D5142-02ae1 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02a Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM G99-05 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G99-04a Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM E2491-13(2018) Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
ASTM E2439-09 Standard Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM E2491-08 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
ASTM G99-04 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM D6318-03 Standard Practice for Calibrating a Fathometer Using a Bar Check Method
ASTM E74-18e1 Standard Practices for Calibration and Verification for Force-Measuring Instruments
ASTM E74-18 Standard Practices for Calibration and Verification for Force-Measuring Instruments
ASTM D5142-09 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-04 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D6318-03(2014) Standard Practice for Calibrating a Fathometer Using a Bar Check Method
ASTM D6318-03(2008) Standard Practice for Calibrating a Fathometer Using a Bar Check Method
ASTM E123-92 Standard Specification for Apparatus for Determination of Water by Distillation
ASTM F1174-01 Standard Practice for Using a Personal Computer Printer as a Test Instrument
ASTM F1174-01(2006) Standard Practice for Using a Personal Computer Printer as a Test Instrument
ASTM E579-04(2009) Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution
ASTM E2847-11 Standard Practice for 65279; 65279;Calibration and Accuracy Verification of Wideband Infrared Thermometers
ASTM E579-04 Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution
ASTM E408-13(2019) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E579-04(2015) Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution

International Electrotechnical Commission (IEC)

IEC 60412:2007 Nuclear instrumentation - Scintillation detectors - Nomenclature (Identification) - Standard dimensions of scintillators
IEC 60988:2009 Nuclear power plants - Instrumentation important to safety - Acoustic monitoring systems for detection og loose parts: characteristics, design criteria and operational procedures
IEC TR 62971:2015 Radiation instrumentation - Radiation sources used in illicit trafficking detection standards - Guidance and recommendations
IEC 61671-2:2016 Standard for automatic test markup language (ATML) instrument description
IEC 61671-2:2016*IEEE Std 1671.2 Standard for automatic test markup language (ATML) instrument description
IEC 63147:2017 Criteria for accident monitoring instrumentation for nuclear power generating stations

German Institute for Standardization

DIN IEC 60412:2007 Nuclear instrumentation - Scintillation detectors - Nomenclature (identification) - Standard dimensions of scintillators (IEC 60412:2007)
DIN 18723-2:1990 Field procedure for precision testing of surveying instruments; levels

IN-BIS

IS 9376-1979 Specification for instruments for measuring total breakage value and 10% fines value

SE-SIS

SIS SS IEC 741:1984 Nuclear instrumentation — Multichannel amplitude analyzers — Standards for time-to-amplitude converters
SIS SS IEC 412:1983 Nuclear instrumentation - Standard dimensions of scintillators
SIS SS IEC 547:1986 Nuclear instrumentation — Modul?r plug-in unit and standard 19-inch r?ck mounting unit based on NIM standard
SIS SS IEC 678:1986 Nuclear instrumentation - Definitions of CA MAC terms used in IEC publications
SIS SS IEC 460:1983 Nuclear instrumentation - Portable prospecting radiation meters with gamma-ray scintillation detectors (linear scale instruments)

International Organization for Standardization (ISO)

ISO 376:2004 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 21851:2020 Marine technology — Ocean observation systems — Design criteria of ocean hydro-meteorological observation systems reuse and interaction

Association Francaise de Normalisation

NF A09-320-1:2010 Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 1 : instruments.

Japanese Industrial Standards Committee (JISC)

JIS Z 9043:1962 Significance test of difference between the population mean and the standard (standard deviation known, two-sided)
JIS Z 9045:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, two-sided)
JIS Z 9042:1962 Significance test of difference between the population mean and the standard (standard deviation known, one-sided)
JIS Z 9044:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, one-sided)

American National Standards Institute （ANSI)

ANSI N42.34-2006 Performance Criteria for Hand-held Instruments for the Detection and Identification of Radionuclides
ANSI N42.34-2003 Performance Criteria for Hand-held Instruments for the Detection and Identification of Radionuclides
ANSI/IEEE N42.34:2021 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
ANSI/IEEE N42.34:2006 Performance Criteria for Hand-Held Instruments for the Detection and Identification of Radionuclides
ANSI/IEEE N42.34:2015 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
ANSI N42.33-2003 Radiation Detection Instrumentation for Homeland Security

PL-PKN

PN M53396-1987 Measuring instruments Radius gauges
PN M53201-1988 Measuring instruments Adjusting standards for external micrometers

Institute of Electrical and Electronics Engineers (IEEE)

IEEE/ANSI N42.33-2006 American National Standard for Portable Radiation Detection Instrumentation for Homeland Security
IEEE N42.33-2006 Portable Radiation Detection Instrumentation for Homeland Security
IEEE/ANSI N42.34-2006 American National Standard Performance Criteria for Hand-held Instruments for the Detection and Indentification of Radionuclides
ANSI N42.34-2021 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
IEEE N42.34-2021 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
IEEE/ANSI N42.34-2003 American National Standard Performance Criteria for Hand-held Instruments for the Detection and Identification of Radionuclides
IEEE/ANSI N42.34-2021 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
ANSI N42.34-2015 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
IEEE/ANSI N42.34-2015 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
IEEE/ANSI N42.33-2003 American National Standard for Portable Radiation Detection Instrumentation for Homeland Security
AIEE No 33-1927 AIEE Standards - Electrical Measuring Instruments
IEEE Std 497-1981 IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE Std 497-2010 IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE Std 497-2002 IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE 497-1981 IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE Std 497-2016 IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE Std N323C-2009 (New Standard) American National Standard for Radiation Protection Instrumentation Test and Calibration - Air Monitoring Instruments
IEEE Std N323C-2009 American National Standard for Radiation Protection Instrumentation Test and Calibration - Air Monitoring Instruments
ANSI N323AB-2013 (Revision and Redesignation of ANSI N323A-1997 and ANSI N323B-2002) American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
IEEE/ANSI N323AB-2013 American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
IEEE/ANSI N323A-1997 American National Standard Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
IEEE P2735.1/D4.1, August 2022 IEEE Draft Standard Design Criteria of Complex Virtual Instruments for Household Appliance Test
ANSI PN42.33/D3.4, May 2018 IEEE/ANSI Draft Standard for Portable Gamma and Radiation Detection Instrumentation for Homeland Security
IEEE P2735.1/D4.0, July 2022 IEEE Draft Standard Design Criteria of Complex Virtual Instruments for Household Appliance Test
ANSI PN42.34-D9a, 2015 ANSI/IEEE Draft American National Standard Performance Criteria for Hand-Held Instruments for the Detection and Identification of Radionuclides
IEEE Std 2402-2017 IEEE Standard Design Criteria of Complex Virtual Instruments for Ocean Observation
ANSI Std N317-1980 American National Standard Performance Criteria for Instrumentation Used for Inplant Plutonium Monitoring
ANSI N42.34a-2020 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides - Amendment 1
IEEE P497/DB, January 2016 IEEE Draft Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations

Underwriters Laboratories (UL)

UL 920002-2021 UL Standard for Safety Installation Operation and Maintenance of Toxic Gas-Detection Instruments
UL 920401-2022 UL Standard for Safety Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres

Korean Agency for Technology and Standards (KATS)

KS A 3252-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS A 3252-1985 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS C IEC 60988:2012 Nuclear power plants-Instrumentation important to safety- Acoustic monitoring systems for detection of loose parts: characteristics, design criteria and operational procedures
KS C IEC 61888:2012 Nuclear power plants－Instrumentation important to safety－Determination and maintenance of trip setpoints
KS C 1706-2022 Instrument transformers for standard and measuring

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE N42.34-2015 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
IEEE N42.34-2006 Performance Criteria for Hand-Held Instruments for the Detection and Identification of Radionuclides
IEEE PN42.33D3-2018 DRAFT Standard for Portable Gamma and X Radiation Detection Instrumentation for Homeland Security
IEEE N317-1980 Performance Criteria for Instrumentation Used for Inplant Plutonium Monitoring

HU-MSZT

MSZ 18222/5-1980 Audiometric instruments. Automatically run standardized instrument supplementary testing
MSZ 18222/3-1979 Audiometry instrument testing methods
MSZ 11002/1-1988 Testing process. electric equipment. Inspection of electrical equipment, general regulations for electronic equipment
MNOSZ 15584-1953 Glass box instrument water detection
MSZ 8889/1.lap-1963 Equipment and instruments for climate-related testing. Cold detection
MSZ 11029/6-1981 Electric power products. Overload detection in the detection process of electronic instruments
MSZ 8889/2.lap-1963 Equipment and instruments for climate-related testing. Dry heat detection
MSZ 11029/7-1983 electronic product. Cross detection of electronic instrument testing process
MSZ 8888/9.lap-1962 Equipment and instruments for climate-related testing. Mildew detection

GSO

GSO ASTM E74:2022 Standard Practices for Calibration and Verification for Force-Measuring Instruments
BH GSO ASTM E74:2023 Standard Practices for Calibration and Verification for Force-Measuring Instruments

Standard Association of Australia （SAA）

AS 1259.2:1990 Acoustics - Sound level meters - Integrating - Averaging

NEMA - National Electrical Manufacturers Association

NEMA SBP 2-2014 Multi-Criteria Detectors (MCD)

CZ-CSN

CSN 25 0100-1986 Tests and approvals of a types of measuring instruments. General requirements

RU-GOST R

GOST 14828-1969 Instruments for physical-chemical quantities measurement. Radiospectrometers. Terms
GOST 8.212-1984 State system for ensuring the uniformity of measurements. Measures of electromotive force. Standard cells. Calibration methods and facilities
GOST 4.448-1986 Product-quality index system. Optical instruments for angular measurements. Nomenclature of indices

VE-FONDONORMA

COVENIN 748-1974 Standard values for capacitors and resistors

GOST

GOST 8.009-1972 GSI. Standardized metrological characteristics of measuring instruments

British Standards Institution (BSI)

BS IEC 61671-2:2016 Standard for automatic test markup language (ATML) instrument description
BS EN ISO 376:2011 Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
BS IEC 61888:2003 Nuclear power plants - Instrumentation important to safety - Determination and maintenance of trip setpoints

ISA - International Society of Automation

ISA TR92.06.03-2008 Feasibility of Chlorine Detection Instrument Testing
ISA TR92.06.03-1999 Feasibility of Chlorine Detection Instrument Testing

Society of Automotive Engineers (SAE)

SAE AS412A-1991 CARBON MONOXIDE DETECTOR INSTRUMENTS
SAE AS412B-2008 Carbon Monoxide Detector Instruments
SAE AS412B-2001 Carbon Monoxide Detector Instruments
SAE J1627-1995 Performance Criteria for Electronic Refrigerant Leak Detectors

SAE - SAE International

SAE AS412A-1956 Carbon Monoxide Detector Instruments
SAE J1627-1993 RATING CRITERIA FOR ELECTRONIC REFRIGERANT LEAK DETECTORS

Federal Aviation Administration (FAA)

FAA 14 CFR PART 97-2011 STANDARD INSTRUMENT PROCEDURES

AGMA - American Gear Manufacturers Association

97FTM1-1997 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
931-A02-2002 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears

Others: