Inspection standards aerospace

Inspection standards aerospace, Total:492 items.

The international standard classification for "Inspection standards aerospace" includes: Aerospace fluid systems and components , Rubber , Aerospace electric equipment and systems .

The Chinese standard classification for "Inspection standards aerospace" includes: Pipe fittings, clamps and seals , Forestry chemical raw material , Electrical system and equipment .

未注明发布机构

DIN EN 4727:2015 Aerospace series - Standardized passenger seat weight information
SAE AS 5127D-2024 Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens
DIN EN 9133 E:2017-09 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
DIN EN 4880 E:2020-11 Aerospace series - General technical specification for standard parts
SAE AS9102B-2014 Aerospace First Article Inspection Requirement
SAE AS568F-2020 Aerospace Size Standard for O-Rings

Professional Standard - Civil Aviation

MH 7007.1-1995 Appraisal standard of physical examination for civil aviation aircrew

未注明发布机构

DIN EN 4727:2015 Aerospace series - Standardized passenger seat weight information
DIN EN 9133 E:2017-09 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
SAE AS568F-2020 Aerospace Size Standard for O-Rings
SAE AS 5127D-2024 Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens
SAE AS9102B-2014 Aerospace First Article Inspection Requirement
DIN EN 4880 E:2020-11 Aerospace series - General technical specification for standard parts

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14409-1993 Aerospace. Pipelines. Identification

Professional Standard - Agriculture

NY/T 733-2003 Raw natural rubber—Aviation tire standard rubber

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35853.6-2018 List of aerospace equivalent terms—Part 6:Standard atmosphere

SAE - SAE International

SAE AS7119-2005 Nadcap Aerospace Standard for Electronics Printed Circuit Boards
SAE AS7119B-2015 Nadcap Aerospace Standard for Electronics Printed Circuit Boards
SAE AS INDEX-2016 Aerospace Standards Index - 2016
SAE AS INDEX-2017 Aerospace Standards Index - 2017
SAE AS INDEX-2018 Aerospace Standards Index - 2018
SAE AS INDEX-2019 Aerospace Standards Index - 2019
SAE AS INDEX-2015 Aerospace Standards Index - 2015
SAE AS568-1971 Aerospace Size Standard for O-Rings
SAE AS568A-1974 Aerospace Size Standard for O-Rings
SAE ARP5607A-2005 Legibility of Print on Aerospace Wires and Cables
SAE AIR737F-2012 AEROSPACE HYDRAULIC AND PNEUMATIC SPECIFICATIONS AND STANDARDS
SAE AS5457-2002 Aerospace Standard for Hand-Held Wire Stripper Tools
SAE AS5457A-2010 Aerospace Standard for Hand-Held Wire Stripper Tools
SAE AS4361-2003 Minimum Performance Standards for Aerospace Electric Power Converters
SAE ARP798B-2017 Design Criteria for White Incandescent Lighted Aerospace Instruments
SAE AS5502D-2016 Standard Requirements for Aerospace Sealants and Adhesion Promoters
SAE AS4361A-2011 Minimum Performance Standards for Aerospace Electric Power Converters
SAE AS9000-1998 Aerospace Basic Quality System Standard (Editorial Revision Only)
SAE AIR2000D-1991 Aerospace Fluid System Standards@ Metric@ National and International
SAE AS7489-2017 Standard Requirements for Aerospace Organic Coatings Applicator Certification
SAE AIR2000E-2000 Aerospace Fluid System Standards@ Metric@ National and International
SAE AIR888-1971 RECOMMENDED STANDARD FOR AEROSPACE FILTER ELEMENT FINE WIRE MESH

Society of Automotive Engineers (SAE)

SAE AS7119A-2005 Nadcap Aerospace Standard for Electronics Printed Circuit Boards
SAE AS INDEX-2021 AEROSPACE SPECIFICATIONS INDEX - 2021 (AEROSPACE STANDARDS (INCLUDING CONVERTED MILITARY SPECIFICATIONS)-AEROSPACE RECOMMENDED PRACTICES -AEROSPACE INFORMATION REPORTS-AEROSPACE RESOURCE DOCUMENTS-METRIC AEROSPACE STANDARDS AND RECOMMENDED PRACTICES)
SAE AS9102A-2004 Aerospace First Article Inspection Requirement
SAE AS568C-2008 Aerospace Size Standard for O-Rings
SAE AS5502B-2008 Standard Requirements for Aerospace Sealants
SAE AIR5575-2002 Hot Stamp Wire Marking Concerns for Aerospace Vehicle Applications
SAE AS568D-2014 Aerospace Size Standard for O-rings
SAE AS568A-1995 AEROSPACE SIZE STANDARD FOR O-RINGS
SAE AS568E-2020 Aerospace Size Standard for O-Rings
SAE AS27465AR-6-2022 AS27465AR Amendment Record for Aerospace Standard AS27465-499
SAE ARP798A-2007 (R) Design Criteria for White Incandescent Lighted Aerospace Instruments
SAE AIR737A-1963 AEROSPACE HYDRAULIC AND PNEUMATIC SPECIFICATIONS AND STANDARDS
SAE AIR1408A-1986 Aerospace Fuel System Specifications and Standards
SAE ARP5607-2002 Legibility of Print on Aerospace Wires and Cables
SAE ARP5607B-2021 Legibility of Print on Aerospace Wires and Cables
SAE ARP5607A-2013 Legibility of Print on Aerospace Wires and Cables
SAE AS5752-2019 Aerospace - Visual Inspection Standard for Elastomeric Sealing Elements Other than O-Rings
SAE AS46778AR-3-2023 AS46778AR Amendment Record for Aerospace Standard No. AS46778
SAE AS5127/1D-2020 Aerospace Standard Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds
SAE AIR737C-1971 AEROSPACE HYDRAULIC AND PNEUMATIC SPECIFICATIONS AND STANDARDS
SAE AIR737B-1966 AEROSPACE HYDRAULIC AND PNEUMATIC SPECIFICATIONS AND STANDARDS
SAE AS5798-2013 Aerospace Size Standard for Oversize O-rings
SAE AIR737D-2011 AEROSPACE HYDRAULIC AND PNEUMATIC SPECIFICATIONS AND STANDARDS
SAE AIR737-1992 AEROSPACE HYDRAULIC AND PNEUMATIC SPECIFICATIONS AND STANDARDS
SAE AS5798A-2019 Aerospace Size Standard for Oversize O-Rings
SAE AS9102C-2023 Aerospace Series - First Article Inspection Requirements
SAE AS5127/1B-2009 Aerospace Standard Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds
SAE AS5127B-2013 Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens
SAE ARP798-1965 Design Criteria for White Incandescent Lighted Aerospace Instruments
SAE TS49-3-2019 TS49 ELASTOMERIC TOROIDAL SEALING RINGS (O-RINGS) Manufacturing & Inspection Standards for Aerospace Application
SAE TS49-2-2004 TS49 Elastomeric Toroidal Sealing Rings (O-Rings) Manufacture and Inspection Standards for Aerospace Applications
SAE AS5502E-2022 Standard Requirements for Aerospace Sealants and Adhesion Promoters
SAE ARP798A-2012 Design Criteria for White Incandescent Lighted Aerospace Instruments
SAE ARP798-1991 DESIGN CRITERIA FOR WHITE INCANDESCENT LIGHTED AEROSPACE INSTRUMENTS
SAE AS5798-2007 Aerospace Size Standard for Oversize O-rings
SAE AS63298AR-3-2022 AS63298-299AR Amendment Record for Aerospace Standard No. AS63298-299
SAE AS60300AR-4-2022 AS60300-399AR Amendment Record for Aerospace Standard No. AS60300-399
SAE AMS7201-2020 Standard Contaminant for Testing Aerospace Cleaners
SAE AIR2000-1981 AEROSPACE FLUID SYSTEM STANDARDS, METRIC, NATIONAL AND INTERNATIONAL
SAE AS60100AR-5-2022 AS60100-199AR Amendment Record for Aerospace Standard No. AS60100-199
SAE ARP9162-2005 Aerospace Operator Self-Verification Programs
SAE AS60200AR-4-2022 AS60200-299AR Amendment Record for Aerospace Standard No. AS60200-299
SAE AS60400AR-4-2022 AS60400-499AR Amendment Record for Aerospace Standard No. AS60400-499
SAE AIR2000C-1988 AEROSPACE FLUID SYSTEM STANDARDS, METRIC, NATIONAL AND INTERNATIONAL
SAE AIR2000B-1986 AEROSPACE FLUID SYSTEM STANDARDS, METRIC, NATIONAL AND INTERNATIONAL
SAE AIR2000F-2021 Aerospace Fluid System Standards, Metric, National and International
SAE AIR2000E-2013 Aerospace Fluid System Standards, Metric, National and International
SAE AS63480AR-5-2022 AS63480-529AR Amendment Record for Aerospace Standard No. AS63480-529
SAE AS6870-2020 Nondestructive Inspection Program Requirements for Aerospace Systems
SAE AS60600AR-4-2022 AS60600-699AR Amendment Record for Aerospace Standard No. AS60600-699
SAE ARP1287-1974 SAE STANDARDS FOR USE IN THE DESIGN OF AEROSPACE VEHICULAR GROUND EQUIPMENT
SAE AS60500AR-4-2022 AS60500-599AR Amendment Record for Aerospace Standard No. AS60500-599
SAE AIR1129-1999 Aerospace Ground Equipment Criteria for a Propellant Transfer Unit
SAE AIR888-2011 RECOMMENDED STANDARD FOR AEROSPACE FILTER ELEMENT FINE WIRE MESH
SAE AS6870A-2023 Nondestructive Inspection Program Requirements for Aerospace Systems

American Society for Testing and Materials (ASTM)

ASTM E1444/E1444M-21 Standard Practice for Magnetic Particle Testing for Aerospace
ASTM E1444/E1444M-22 Standard Practice for Magnetic Particle Testing for Aerospace
ASTM E1444/E1444M-22a Standard Practice for Magnetic Particle Testing for Aerospace
ASTM E1444/E1444M-20 Standard Practice for Magnetic Particle Testing for Aerospace
ASTM F3599-23 Standard Guide for Aerospace/Aviation Powerplant Personnel Certification
ASTM E2533-16 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications
ASTM E2533-21 Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications
ASTM F302-78(1996) Standard Practice for Field Sampling of Aerospace Fluids in Containers
ASTM E1548-03 Standard Practice for Preparation of Aerospace Contamination Control Plans
ASTM E2533-09 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications
ASTM F319-19 Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
ASTM F310-07(2020) Standard Practice for Sampling Cryogenic Aerospace Fluids
ASTM F319-19(2024) Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
ASTM F319-09(2014) Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
ASTM E3166-20e1 Standard Guide for Nondestructive Examination of Metal Additively Manufactured Aerospace Parts After Build
ASTM F310-07 Standard Practice for Sampling Cryogenic Aerospace Fluids
ASTM E3166-20 Standard Guide for Nondestructive Examination of Metal Additively Manufactured Aerospace Parts After Build
ASTM F310-70(1996) Standard Practice for Sampling Cryogenic Aerospace Fluids
ASTM F319-91a(2003) Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
ASTM F319-09 Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
ASTM E2533-16a Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications
ASTM F310-04 Standard Practice for Sampling Cryogenic Aerospace Fluids
ASTM A646/A646M-17(2022) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
ASTM E2533-17 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications
ASTM F2429-15 Standard Terminology Relating to Aerospace Transparent Materials and Enclosures
ASTM F2429-15(2021) Standard Terminology Relating to Aerospace Transparent Materials and Enclosures
ASTM E2582-07(2014) Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
ASTM E2582-07 Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
ASTM E2533-17e1 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications
ASTM F310-07(2012) Standard Practice for Sampling Cryogenic Aerospace Fluids

ES-UNE

UNE-EN 3368:2008 Aerospace series - Aerospace design standard - Holes for locating pins (Endorsed by AENOR in May of 2008.)
UNE-EN 9133:2019 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products
UNE-EN 2424:2008 Aerospace series - Marking of aerospace products (Endorsed by AENOR in July of 2008.)
UNE-EN 4617:2006 Aerospace series - Recommended practices for standardising company standards (Endorsed by AENOR in July of 2006.)
UNE-EN 4014:2004 Aerospace series - Inserts, thickwall, self-locking - Design standard (Endorsed by AENOR in February of 2005.)
UNE-EN 3782:2008 Aerospace series - Holes for 100° countersunk head screws - Design standard (Endorsed by AENOR in July of 2008.)
UNE-EN 4727:2017 Aerospace series - Standardized passenger seat weight information (Endorsed by Asociación Española de Normalización in June of 2017.)
UNE-EN 4300:2008 Aerospace series - Identification marking of engine items - Design standard (Endorsed by AENOR in June of 2008.)
UNE-EN 3201:2008 Aerospace series - Holes for metric threaded fasteners - Design standard (Endorsed by AENOR in May of 2008.)

German Institute for Standardization

DIN EN 3368:2008-06 Aerospace series - Aerospace design standard - Holes for locating pins; German and English version EN 3368:2008
DIN 65000-1:1983 Aerospace; subject group index of aerospace standards; basic standards, materials, semifinished products, standard parts
DIN EN 3368:2008 Aerospace series - Aerospace design standard - Holes for locating pins; German and English version EN 3368:2008
DIN 65000-5:1983 Aerospace; subject group index of aerospace standards; workshop facilities
DIN EN 2424:2008-10 Aerospace series - Marking of aerospace products; German and English version EN 2424:2008
DIN 65000-2:1984 Aerospace; subject group index of aerospace standards; electrical engineering
DIN 65000-2:1984-12 Aerospace; subject group index of aerospace standards; electrical engineering
DIN EN 14725:2005 Space engineering - Verification; German and English version EN 14725:2003
DIN 65000-6:1983 Aerospace; subject group index of aerospace standards; manufacturing (technological processes)
DIN EN 2424:2008 Aerospace series - Marking of aerospace products; German and English version EN 2424:2008
DIN 65604:1988 Aerospace; special gauging facilities; colour identification
DIN EN 13292:1999 Aerospace series - Space engineering standards; Policy and principles; German version EN 13292:1999
DIN EN 9133:2018-10 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products; German and English version EN 9133:2018
DIN EN 3612:1996 Aerospace series - Undercuts for splines - Design standard; German version EN 3612:1996
DIN 65000-0:2003 Aerospace - Subject group index of aerospace standards - Part 0: Arrangement of classification numbers; Survey
DIN 65000-7:2004 Aerospace - Subject group index of aerospace standards - Part 7: Air cargo and ground equipment
DIN 65000-8:1983 Aerospace; subject group index of aerospace standards; aircraft (airframe and propulsion system)
DIN EN 4617:2008-02 Aerospace series - Recommended practices for standardising company standards; German and English version EN 4617:2006
DIN EN 9133:2007 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts; German and English version EN 9133:2004
DIN EN 3612:1996-10 Aerospace series - Undercuts for splines - Design standard; German version EN 3612:1996
DIN EN 4880:2022-12 Aerospace series - General technical specification for standard parts; German version ASD-STAN prEN 4880:2022 / Note: Date of issue 2022-11-18
DIN EN 3676:1998-02 Aerospace series - Inserts, thin wall, self-locking - Design standard; German version EN 3676:1998
DIN 65574:1993 Aerospace; nameplates; directions for design
DIN EN 4880:2023 Aerospace series - General technical specification for standard parts; German and English version EN 4880:2023
DIN 65145-1:2014-12 Aerospace - Power supply for anti-collision beacon; Inactive for new design
DIN EN 4199-002:2007 Aerospace series - Bonding straps for aircraft - Part 002: Index of product standard; German and English version EN 4199-002:2006
DIN EN 4617:2008 Aerospace series - Recommended practices for standardising company standards; German and English version EN 4617:2006
DIN EN 4014:2006-10 Aerospace series - Inserts, thickwall, self-locking - Design standard; German and English version EN 4014:2004
DIN EN 3782:2008-12 Aerospace series - Holes for 100° countersunk head screws - Design standard; German and English version EN 3782:2008
DIN EN 4727:2017-10 Aerospace series - Standardized passenger seat weight information; German and English version EN 4727:2017, only on CD-ROM / Note: CD-ROM
DIN EN 3676:1998 Aerospace series - Inserts, thin wall, self-locking - Design standard; German version EN 3676:1998
DIN EN 3611:1995 Aerospace series - Spigots - Dimensions and fit selection; design standard; German version EN 3611:1995
DIN V 65900-12:1997 Aerospace series - Metallic matrials - Relationship between dimensional standards and material standards (AECMA Technical Report TR 2410:1996)
DIN EN 3782:2008 Aerospace series - Holes for 100° countersunk head screws - Design standard; German and English version EN 3782:2008
DIN EN 4014:2006 Aerospace series - Inserts, thickwall, self-locking - Design standard; German and English version EN 4014:2004
DIN ISO 19828:2021-03 Welding for aerospace applications - Visual inspection of welds (ISO 19828:2017)
DIN EN 4300:2009-01 Aerospace series - Identification marking of engine items - Design standard; German and English version EN 4300:2008 / Note: Applies in conjunction with DIN EN 4301 (2009-10).
DIN EN 4300:2009 Aerospace series - Identification marking of engine items - Design standard; German and English version EN 4300:2008
DIN EN 3201:2009-04 Aerospace series - Holes for metric threaded fasteners - Design standard; German and English version EN 3201:2008

SCC

NS-EN 3368:2008 Aerospace series — Aerospace design standard — Holes for locating pins
DANSK DS/EN 3368:2008 Aerospace series - Aerospace design standard - Holes for locating pins
DIN EN 3368 E:1991 Draft Document - Aerospace series; aerospace design standard, holes for locating pins
NS-EN 2424:1995 Aereospace series — Marking of aerospace products
DANSK DS/EN 2424:2008 Aerospace series - Marking of aerospace products
SAE ASIN2022-2022 Aerospace Standards Index - 2022
NS-EN 9133:2004 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
ASD-STAN PREN 2424:2006 Aerospace Series Marking of Aerospace Products
ANSI/NEMA WC 27500-2005 Standard for Aerospace and Industrial Electrical Cable
ANSI/NEMA WC 27500-2012 Standard for Aerospace and Industrial Electrical Cable
NS-EN 2424:2008 Aerospace series — Marking of aerospace products
AENOR UNE-EN 9133:2006 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
06/19994595 DC EN 2424. Aerospace series. Marking of aerospace products
UNE-EN 2424:1996 AEROSPACE SERIES. MARKING OF AEROSPACE PRODUCTS.
DANSK DS/EN 9133:2018 Aerospace series – Quality Management Systems – Qualification Procedure for Aerospace Standard Products
NS-EN 9133:2018 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products
ASD-STAN PREN 9133:2016 Aerospace series Quality Management Systems Qualification Procedure for Aerospace Standard Products
DIN EN 9133 E:2017 Draft Document - Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products; German and English version FprEN 9133:2017
DANSK DS/EN 3612:1996 Aerospace series - Undercuts for splines - Design standard
NS-EN 4617:2006 Aerospace series — Recommended practices for standardising company standards
ASD-STAN PREN 4617:2004 Aerospace series Recommended practices for standardising company standards
NS-EN 3612:1996 Aerospace series - Undercuts for splines - Design standard
DANSK DS/EN 4617:2006 Aerospace series - Recommended practices for standardising company standards
NS-EN 4880:2023 Aerospace series - General technical specification for standard parts
DANSK DS/EN 4179:2017 Aerospace series – Qualification and approval of personnel for non-destructive testing
ASD-STAN PREN 4880:2022 Aerospace series — General technical specification for standard parts
DIN 65000-9 E:2003 Draft Document - Aerospace - Subject group index of aerospace standards - Part 9: Management systems and procedures
DANSK DS/EN 4880:2023 Aerospace series – General technical specification for standard parts
ANSI/NEMA WC 27500-2020 American National Standard for Aerospace and Industrial Electrical Cable
BS EN 2424:1995 Marking of aerospace products
ASD-STAN TR 3198:2020 Aerospace series — Manufacturers' identification monograms and marks for EN aerospace products
SAE AS5127D-2024 Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens
NS-EN 3782:2008 Aerospace series - Holes for 100° countersunk head screws - Design standard
NS-EN 4014:2003 Aerospace series — Inserts, thickwall, self-locking — Design standard
NS-EN 3676:1998 Aerospace series - Inserts, thin wall, self-locking - Design standard
NS-EN 4014:2004 Aerospace series — Inserts, thickwall, self-locking — Design standard
ASD-STAN PREN 2003-13:1986 Aerospace Series Test Methods for Steel Products Part 13 - Macrographic Examination by Sulphur Print (Baumann Method)
DANSK DS/EN 3676:1998 Aerospace series - Inserts, thin wall, self-locking - Design standard
ASD-STAN prEN 3198:1970 Aerospace series - Manufacturers' identification monograms and marks for EN aerospace products
DANSK DS/EN 3782:2008 Aerospace series - Holes for 100° countersunk head screws - Design standard
DANSK DS/EN 4014:2005 Aerospace series - Inserts, thickwall, self-locking - Design standard
ASD-STAN TR AMS2750 FRENCH:2009 Série aérospatiale Spécification des matériaux aérospatiaux — Pyrométrie
DANSK DS/EN 4300:2008 Aerospace series - Identification marking of engine items - Design standard
NS-EN 4300:2008 Aerospace series — Identification marking of engine items — Design standard
ASD-STAN PREN 4179:2020 Aerospace series Qualification and approval of personnel for nondestructive testing
AENOR UNE-EN 2424:2008 Aerospace series - Marking of aerospace products (Endorsed by AENOR in July of 2008.)
ASD-STAN TR 9251:2023 Aerospace series Flammability test organizations qualification standard
NS-EN 4179:2000 Aerospace series — Qualification and approval of personnel for non-destructive testing
ASD-STAN PREN 4618:2004 Aerospace series Aircraft internal air quality standards, criteria and determination methods
ASD-STAN PREN 2000:2003 Aerospace Series Quality Assurance EN Aerospace Products Approval of the Quality Systems of Manufacturers
UNE-EN 4179:2000 Aerospace series. Qualification and approval of personnel for non-destructive testing.
ASD-STAN PREN 9253 CORR 1:2018 Aerospace series - Surveillance of Aerospace Design Suppliers
ASD-STAN TR 4618:2014 Aerospace series Aircraft internal air quality standards, criteria and determination methods
NS-EN 9102:2006 Aerospace series - Quality systems - First article inspection
UNE-EN 2000:1993 AEROSPACE SERIES. QUALITY ASSURANCE. EN AEROSPACE PRODUCTS. APPROVAL OF THE QUALITY SYSTEM OF MANUFACTURERS.
NS-EN 4727:2017 Aerospace series — Standardized passenger seat weight information
NS-EN 4727:2015 Aerospace series — Standardized passenger seat weight information
DANSK DS/EN 4727:2017 Aerospace series – Standardized passenger seat weight information
ASD-STAN PREN 9251:2018 Aerospace series - Flammability Test Organisations Qualification Standard
AS 3669:1989 Non-destructive testing - Qualification and registration of personnel - Aerospace
AS 3669:2001 Non-destructive testing - Qualification and registration of personnel - Aerospace
NS-EN 3201:2008 Aerospace series - Holes for metric threaded fasteners - Design standard
ASD-STAN PREN 4727:2015 Aerospace series Standardized passenger seat weight information
DANSK DS/EN 3201:2008 Aerospace series - Holes for metric threaded fasteners - Design standard
BS 5F 100:1991 Procedure for inspection and testing of textiles for aerospace purposes
AENOR UNE-EN 9107:2019 Aerospace series - Quality systems - Direct Delivery Authorization - Guidance for Aerospace Companies (Endorsed by Spanish Association for Standardization in February of 2019.)

Association Francaise de Normalisation

NF L20-027*NF EN 3368:2008 Aerospace series - Aerospace design standard - Holes for locating pins
NF EN 4617:2006 Série aérospatiale - Normaliser les standards d'entreprise
NF EN 2424:2008 Série aérospatiale - Marquage des produits aérospatiaux
NF L09-010*NF EN 2424:2008 Aerospace series - Marking of aerospace products
NF L09-012*NF EN 4301:2009 Aerospace series - Identification marking methods for engine items - Engineering requirements
NF L09-121:1990 Aircraft aerospace. Specific tooling. Identification and check marking.
NF L09-020:2020 Série aérospatiale - Marquage d'identification des équipements à usage aérospatial
NF L67-001:2010 Aerospace series - Aircraft internal air quality standards, criteria and determination methods.
NF L00-104:2005 Aerospace series - Quality management systems - Qualification Procedure for aerospace standard parts.
NF EN 9133:2018 Aerospace series - Quality management systems - Qualification procedure for standardized aerospace parts
NF L40-201*NF ISO 12:1988 Aerospace. Pipelines. Identification.
NF EN 3368:2008 Aerospace Series - Holes for Centering Feet - Design Standards
NF L00-014*NF EN 4617:2006 Aerospace series - Recommanded parctices for standardising compagny standards
NF EN 3612:1996 Aerospace Series - Spline Clearance Grooves - Design Standard
NF L32-612*NF EN 3612:1996 Aerospace series. Undercuts for splines. Design standard.
NF EN 4300:2008 Aerospace series - Marking of engine articles - Design standard
NF EN 3782:2008 Aerospace Series - 100o Countersunk Head Screw Holes - Design Standard
NF L09-020:1977 Identification marking for aerospace equipment.
NF L09-002:2019 Aerospace series - Aerospace components part numbers - Major and minor modifications identification
NF L09-752:2022 Série aérospatiale - Matériaux métalliques - Codes pour référence des pièces normalisées
FD L00-026:2010 Aerospace industry - Metallic materials - Relationship between AIR standards and EN standards
NF ISO 19828:2023 Soudage pour applications aérospatiales - Contrôle visuel des soudures
NF L20-028*NF EN 3782:2008 Aerospace series - Holes for 100o countersunk head screws - Design standard
NF EN 9117:2017 Aerospace series - Delegation of product inspection before delivery
NF L09-505:2020 Aerospace series - Standardized electrical cables - Designation and reference composition
NF EN 3781:2008 Aerospace series - Grooves for spiral retaining rings - Design standard
NF L09-752:2021 Aerospace series - Metallic materials - Codes for standard item part numbers
NF EN 3676:1998 Aerospace Series - Threaded, Thin-Walled, Internally Locked Bushings - Design Standard
NF L09-751:2019 Aerospace series - Designation of standard items - Parts numbers writting
NF L00-081:1992 Aerospace series. Quality assurance EN. Aerospace products. Approval of the quality system of manufacturers.
NF EN 4727:2017 Série aérospatiale - Définition standardisée du poids d'un siège passager
NF L23-163*NF EN 2139:1989 Aerospace series. Washers, flat, heat resisting steel.
NF EN 3475-201:2002 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 201 : examen visuel
NF EN 3201:2008 Aerospace Series - Metric Threaded Fastener Holes - Design Standard
NF L31-613*NF EN 2365:1989 Aerospace series. Collars, aluminium alloy.
NF L24-021*NF EN 4014:2005 Aerospace series - Inserts, thickwall, self-locking - Design standard

British Standards Institution (BSI)

BS EN 3368:2008 Aerospace series — Aerospace design standard — Holes for locating pins
BS EN 2424:2008 Aerospace series - Marking of aerospace products
BS EN 9133:2018 Aerospace series. Quality Management System. Qualification Procedure for Aerospace Standard Products
BS EN 4617:2006 Recommended practices for standardizing company standards
BS EN 9133:2004 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
BS EN 4179:2021 Aerospace series. Qualification and approval of personnel for non-destructive testing
BS EN 4880:2023 Aerospace series. General technical specification for standard parts
BS EN 2240-055:2011 Aerospace series. Lamps, incandescent. Lamp, code 1495. Product standard
BS EN 3475-201:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Visual examination
BS M 39:1972 Method for penetrant inspection of aerospace materials and components
BS EN 4014:2003 Aerospace series - Inserts, thickwall, self-locking - Design standard
BS EN 2266-005:2006 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - UV laser printable - Product standard
24/30489037 DC ISO 19828 Welding for aerospace applications. Visual inspection of welds
BS EN 2240-060:2011 Aerospace series. Lamps, incandescent. Lamp, code 1619. Product standard
BS EN 4014:2004 Aerospace series - Inserts, thickwall, self-locking - Design standard
BS EN 2240-003:2010 Aerospace series - Lamps, incandescent - Lamp, code 44 - Product standard
BS EN 3782:2008 Aerospace series - Holes for 100 ° countersunk head screws - Design standard
BS EN 2240-036:2010 Aerospace series - Lamps, incandescent - Lamp, code 388 - Product standard
BS EN 2240-052:2011 Aerospace series. Lamps, incandescent. Lamp, code 1222. Product standard
BS EN 2240-043:2010 Aerospace series - Lamps, incandescent - Lamp, code 685 - Product standard
BS EN 2240-045:2010 Aerospace series - Lamps, incandescent - Lamp, code 714 - Product standard
BS EN 2240-009:2009 Aerospace series - Lamps, incandescent - Lamp, code 83 - Product standard
BS EN 2240-004:2010 Aerospace series - Lamps, incandescent - Lamp, code 47 - Product standard
BS EN 2240-053:2011 Aerospace series. Lamps, incandescent. Lamp, code 1308. Product standard
BS EN 2240-007:2009 Aerospace series - Lamps, incandescent - Lamp, code 74 - Product standard
BS EN 2240-005:2009 Aerospace series - Lamps, incandescent - Lamp, code 73 - Product standard
BS EN 2240-044:2010 Aerospace series - Lamps, incandescent - Lamp, code 713 - Product standard
BS EN 2240-057:2011 Aerospace series. Lamps, incandescent. Lamp, code 1512. Product standard
BS EN 2240-010:2010 Aerospace series - Lamps, incandescent - Lamp, code 84 - Product standard
BS EN 2240-008:2009 Aerospace series - Lamps, incandescent - Lamp, code 75 - Product standard
BS EN 2240-006:2009 Aerospace series - Lamps, incandescent - Lamp, code 73E - Product standard
BS EN 2240-050:2010 Aerospace series - Lamps, incandescent - Lamp, code 1064 - Product standard
BS EN 2240-046:2010 Aerospace series - Lamps, incandescent - Lamp, code 715 - Product standard
BS EN 2240-047:2010 Aerospace series - Lamps, incandescent - Lamp, code 718 - Product standard
BS EN 2240-022:2010 Aerospace series - Lamps, incandescent - Lamp, code 315 - Product standard
BS EN 2240-032:2010 Aerospace series - Lamps, incandescent - Lamp, code 376 - Product standard
BS EN 2240-021:2010 Aerospace series - Lamps, incandescent - Lamp, code 313 - Product standard
BS EN 2240-012:2010 Aerospace series - Lamps, incandescent - Lamp, code 95 - Product standard
BS EN 2240-038:2010 Aerospace series - Lamps, incandescent - Lamp, code 401 - Product standard
BS EN 2240-041:2010 Aerospace series - Lamps, incandescent - Lamp, code 682 - Product standard
BS EN 2240-042:2010 Aerospace series - Lamps, incandescent - Lamp, code 683 - Product standard
BS EN 2240-014:2010 Aerospace series - Lamps, incandescent - Lamp, code 303 - Product standard
BS EN 2240-034:2010 Aerospace series - Lamps, incandescent - Lamp, code 382 - Product standard
BS EN 2240-011:2010 Aerospace series - Lamps, incandescent - Lamp, code 85 - Product standard
BS 6F 100:1998 Procedure for inspection and testing of textiles for aerospace purposes
21/30431255 DC BS EN 4179. Aerospace series. Qualification and approval of personnel for nondestructive testing
BS EN 2240-068:2011 Aerospace series. Lamps, incandescent. Lamp, code 1864. Product standard
BS EN 2240-056:2011 Aerospace series. Lamps, incandescent. Lamp, code 1506. Product standard
BS EN 2240-059:2011 Aerospace series. Lamps, incandescent. Lamp, code 1591. Product standard
BS EN 2240-027:2010 Aerospace series - Lamps, incandescent - Lamp, code 334 - Product standard
BS EN 2240-035:2010 Aerospace series - Lamps, incandescent - Lamp, code 387 - Product standard
BS EN 2240-024:2010 Aerospace series - Lamps, incandescent - Lamp, code 327 - Product standard
BS EN 2240-051:2011 Aerospace series. Lamps, incandescent. Lamp, code 1163. Product standard
BS EN 2240-054:2011 Aerospace series. Lamps, incandescent. Lamp, code 1317. Product standard
BS EN 2240-058:2011 Aerospace series. Lamps, incandescent. Lamp, code 1524. Product standard
BS EN 2240-066:2011 Aerospace series. Lamps, incandescent. Lamp, code 1829. Product standard
BS EN 2240-025:2010 Aerospace series - Lamps, incandescent - Lamp, code 328 - Product standard
BS EN 2240-040:2010 Aerospace series - Lamps, incandescent - Lamp, code 680 - Product standard
BS EN 2240-037:2010 Aerospace series - Lamps, incandescent - Lamp, code 394 - Product standard
BS EN 2240-018:2010 Aerospace series - Lamps, incandescent - Lamp, code 307 - Product standard
BS EN 2240-064:2011 Aerospace series. Lamps, incandescent. Lamp, code 1819. Product standard
BS EN 4727:2017 Aerospace series. Standardized passenger seat weight information
BS EN 2240-063:2011 Aerospace series. Lamps, incandescent. Lamp, code 1815. Product standard
BS EN 2240-061:2011 Aerospace series. Lamps, incandescent. Lamp, code 1683. Product standard
BS EN 2240-065:2011 Aerospace series. Lamps, incandescent. Lamp, code 1820. Product standard
BS EN 2240-013:2010 Aerospace series - Lamps, incandescent - Lamp, code 301 - Product standard
BS EN 2240-031:2010 Aerospace series - Lamps, incandescent - Lamp, code 356 - Product standard
BS EN 2240-026:2010 Aerospace series - Lamps, incandescent - Lamp, code 330 - Product standard
BS EN 2240-030:2010 Aerospace series - Lamps, incandescent - Lamp, code 345 - Product standard
BS EN 2240-029:2010 Aerospace series - Lamps, incandescent - Lamp, code 338 - Product standard
BS EN 4300:2008 Aerospace series - Identification marking of engine items - Design standard
BS EN 2266-005:2005 Cables, electrical, for general purpose — Operating temperatures between
BS EN 4056-002:2014 Aerospace series. Cable ties for harnesses. Index of product standards
BS EN 4727:2015 Aerospace series. Standardized passenger seat weight information
BS EN 2240-023:2010 Aerospace series - Lamps, incandescent - Lamp, code 316 - Product standard
BS EN 2240-020:2010 Aerospace series - Lamps, incandescent - Lamp, code 311 - Product standard
BS EN 2240-033:2010 Aerospace series - Lamps, incandescent - Lamp, code 377 - Product standard
BS EN 2240-028:2010 Aerospace series - Lamps, incandescent - Lamp, code 337 - Product standard
BS EN 2240-016:2010 Aerospace series - Lamps, incandescent - Lamp, code 305 - Product standard
BS EN 2240-039:2010 Aerospace series - Lamps, incandescent - Lamp, code 600 - Product standard
BS EN 2240-015:2010 Aerospace series - Lamps, incandescent - Lamp, code 304 - Product standard
BS EN 2240-019:2010 Aerospace series - Lamps, incandescent - Lamp, code 308 - Product standard
BS EN 2240-017:2010 Aerospace series - Lamps, incandescent - Lamp, code 306 - Product standard
BS EN 2240-049:2010 Aerospace series - Lamps, incandescent - Lamp, code 757 - Product standard
BS EN 2240-062:2011 Aerospace series. Lamps, incandescent. Lamp, code 1810. Product standard
BS EN 2240-069:2011 Aerospace series. Lamps, incandescent. Lamp, code 1978. Product standard
BS 185-17:1973(1999) Glossary of Aeronautical and astronautical terms — Section 17 : Aerospace medicine
BS 185-17:1973 Glossary of aeronautical and astronautical terms - Aerospace medicine
19/30398558 DC BS EN 4179. Aerospace series. Qualification and approval of personnel for non- destructive testing
BS EN 14724:2003 Space project management - Tailoring of space standards
20/30426552 DC BS EN 4880. Aerospace series. General technical specification for standard parts
BS EN 2240-067:2011 Aerospace series. Lamps, incandescent. Lamp, code 1843. Product standard
20/30412751 DC BS EN 4880. Aerospace series. General technical specification for standard parts

AIAA - American Institute of Aeronautics and Astronautics

SP-039-1990 Future of Aerospace Standards
G-010-1993 Reusable Software: Assessment Criteria for Aerospace Applications

American Institute of Aeronautics and Astronautics (AIAA)

AIAA SP-039-1990 Future of Aerospace Standards
AIAA G-010-1993 Reusable Software: Assessment Criteria for Aerospace Applications

European Committee for Standardization (CEN)

EN 3368:2008 Aerospace series - Aerospace design standard - Holes for locating pins
EN 4301:2009 Aerospace series - Identification marking methods for engine items - Engineering requirements
EN 2424:2008 Aerospace series - Marking of aerospace products
EN 2424:1995 Aerospace Series - Marking of Aerospace Products
EN 4617:2006 Aerospace series - Recommended practices for standardising company standards
EN 3612:1996 Aerospace series - Undercuts for splines - Design standard
EN 4014:2004 Aerospace series - Inserts, thickwall, self-locking - Design standard
EN 4014:2003 Aerospace series - Inserts, thickwall, self-locking - Design standard
EN 9133:2004 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
EN 4727:2017 Aerospace series - Standardized passenger seat weight information
EN 4727:2015 Aerospace series - Standardized passenger seat weight information
CEN EN 4300-2008 Aerospace series - Identification marking of engine items - Design standard
EN 4300:2008 Aerospace series - Identification marking of engine items - Design standard
EN 3676:1998 Aerospace series - Inserts, thin wall, self-locking - Design standard
EN 3782:2008 Aerospace series - Holes for 100?countersunk head screws - Design standard
EN 2240-074:2011 Aerospace series - Lamps, incandescent - Part 074: Lamp, code 5086 - Product standard

Japanese Industrial Standards Committee (JISC)

JIS W 0203:1995 Reference atmospheres for aerospace use
JIS W 0601:1990 Aerospace -- Pipelines -- Identification
JIS W 0904:1995 Liquid penetrant inspection for aerospace use
JIS W 4031:1982 Inspection process of magnetic particle for aerospace use
JIS W 0903:1984 Radiographic inspection for aerospace quality materials

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI)

ARI 700 APP C-1999 Analytical Procedures for ARI Standard

National Electrical Manufacturers Association（NEMA)

NEMA WC 27500-2012 Standard for Aerospace and Industrial Electrical Cable
NEMA WC 27500-2005 Standard for Aerospace and Industrial Electrical Cable
NEMA WC 27500-2000 Standard for Aerospace and Industrial Electrical Cable Errata 1/17/2001

Korean Agency for Technology and Standards (KATS)

KS W 0911-1987 Aerospace Fusion Welders Qualification
KS W 0911-1982 Aerospace Fusion Welders Qualification
KS W 0915-2004(2009) Aerospace nondestructive inspection personnel qualification and certification
KS W ISO 10201-2007(2012) Aerospace－Standards for electronic instruments and systems
KS W ISO 10201:2016 Aerospace－Standards for electronic instruments and systems
KS W ISO 10201:2007 Aerospace-Standards for electronic instruments and systems
KS W 4041-1984 Inspection Process of Magnetic for Aerospace Use
KS W 0913-2014 Radiographic inspection for aerospace quality materials
KS W 0913-2004 Radiographic inspection for aerospace quality materials
KS W 0611-1991 Aerospace -Pipelines-Identification
KS W 1505-2002 Aerospace－Aircraft bolts
KS W ISO 5843-6:2003 Aerospace－List of equivalent terms－Part 6：Standard atmosphere
KS W 0911-1987(2012) Aerospace Fusion Welders Qualification
KS W 0912-1988 STANDARD QUALIFICATION PROCEDURE FOR AEROSPACE FUSION WELDERS QUALFICATION
KS W 0914-2004 Liquid penetrant inspection for aerospace use
KS W ISO 5843-6-2023 Aerospace－List of equivalent terms－Part 6：Standard atmosphere
KS W 4232-1977 Inspection procedure for piston pin of aircraft engine piston pin
KS W ISO 5843-6:2018 Aerospace－List of equivalent terms－Part 6：Standard atmosphere

AENOR

UNE-EN 9133:2006 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts

Danish Standards Foundation

DS/EN 9133:2005 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
DS/EN 4617:2006 Aerospace series - Recommended practices for standardising company standards
DS/EN 3612:1997 Aerospace series - Undercuts for splines - Design standard
DS/EN 3782:2008 Aerospace series - Holes for 100° countersunk head screws - Design standard
DS/EN 4014:2005 Aerospace series - Inserts, thickwall, self-locking - Design standard
DS/EN 3676:1998 Aerospace series - Inserts, thin wall, self-locking - Design standard
DS/EN 4300:2008 Aerospace series - Identification marking of engine items - Design standard

Lithuanian Standards Office

LST EN 9133-2005 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
LST EN 4617-2006 Aerospace series - Recommended practices for standardising company standards
LST EN 3612-2001 Aerospace series - Undercuts for splines - Design standard
LST EN 3676-2001 Aerospace series - Inserts, thin wall, self-locking - Design standard
LST EN 4014-2005 Aerospace series - Inserts, thickwall, self-locking - Design standard
LST EN 3782-2008 Aerospace series - Holes for 100° countersunk head screws - Design standard
LST EN 4300-2008 Aerospace series - Identification marking of engine items - Design standard

CZ-CSN

CSN 31 0001 Dil.3-2005 Czech aerospace technical standards. the term

BE-NBN

NBN-EN 3042-1992 Aerospace series - Quality assurance - EN aerospace products - Qualification procedure

American National Standards Institute （ANSI)

ANSI/NEMA WC27500-2011 Standard for Aerospace and Industrial Electrical Cable
SS-EN 4291:2005 Aerospace series - Aluminium alloy AL-P8090 - Forging stock (Swedish Standard)
ONORM EN 4291:2006 Aerospace series - Aluminium alloy AL-P8090 - Forging stock (Austrian Standard)
ONORM EN 2486:2005 Aerospace series - Aluminium alloy AL-P2618A - Forging stock (Austrian Standard)

International Organization for Standardization (ISO)

ISO/TR 10201:1989 Aerospace — Standards for electronic instruments and systems
ISO/TR 10201:2001 Aerospace - Standards for electronic instruments and systems
ISO/TR 10201:1991 Aerospace; standards for electronic instruments and systems
ISO/TR 10201:1996 Aerospace - Standards for electronic instruments and systems
ISO 12:1987 Aerospace; Pipelines; Identification
ISO 12:1977 Aerospace; Pipelines; Identification
ISO 12:1976 Aerospace - Pipelines - Identification scheme

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

TR 3198-2005 Serie Aerospatiale Monogrammes Et Marques D'Identification Des Fabricants De Produits Aerospatiaux EN (Edition 10)
PREN 3368-1990 Aerospace Series Aerospace Design Standard Holes for Locating Pins (Issue P 1)
TR 3198-2000 Serie Aerospatiale Monogrammes Et Marques D'Identification Des Fabricants De Produits Aerospatiaux EN (Edition 7)
PREN 2424-2006 Aerospace Series Marking of Aerospace Products (Edition P 1)
PREN 9133-2002 Aerospace series Quality management systems Qualification Procedure for Aerospace Standard Parts (Edition P 1; Supersedes EN 3042: 1991)
PREN 4617-2004 Aerospace series Recommended practices for standardising company standards (Edition P 1)
PREN 4179-2003 Aerospace Series Qualification and Approval of Personnel for Non-Destructive Testing (Edition P 3)
PREN 3676-1993 Aerospace Series Inserts@ Thin Wall Design Standard (Edition P 1)
PREN 4618-2004 Aerospace series Aircraft internal air quality standards@ criteria and determination methods (Edition P 1)
PREN 2003-13-1986 Aerospace Series Test Methods for Steel Products Part 13 - Macrographic Examination by Sulphur Print (Baumann Method) (Issue P 1)

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 2424-2006 Aerospace Series Marking of Aerospace Products (Edition P 1)
ASD-STAN TR 3198-2012 Aerospace DE markings and markings from manufacturers of aerospace products
ASD-STAN PREN 4617-2004 Aerospace series Recommended practices for standardising company standards (Edition P 1)
ASD-STAN PREN 3676-1993 Aerospace Series Inserts, Thin Wall Design Standard (Edition P 1)
ASD-STAN PREN 3436-1994 Aerospace Series Lead-Acid Batteries for Aircraft of Format A Type Product Standard (Edition P 1)
ASD-STAN PREN 3438-1994 Aerospace Series Lead-Acid Batteries for Aircraft of Format C Type Product Standard (Edition P 1)
ASD-STAN PREN 3368-1990 Aerospace Series Aerospace Design Standard Holes for Locating Pins (Issue P 1)

European Association of Aerospace Industries

AECMA PREN 3371-1994 Aerospace Series Electrical Bonding Technical Specification Edition P 1
AECMA PREN 3658-1990 Aerospace Series Tube Bend Radii Design Standard Edition 1
AECMA PREN 4179-2008 Aerospace series Qualification and approval of personnel for non-destructive testing Edition P4
AECMA PREN 3676-1993 Aerospace Series Inserts, Thin Wall Design Standard Edition P 1
AECMA PREN 2003-15-1993 Aerospace Series Ultrasonic Testing Reference Blocks
AECMA PREN 2495-1989 Aerospace Series Single-Pole Circuit Breakers Temperature Compensated Rated Currents up to 25 A Product Standard Edition 1
AECMA PREN 3368-1990 Aerospace Series Aerospace Design Standard Holes for Locating Pins Issue P 1
AECMA PREN 2424-2006 Aerospace Series Marking of Aerospace Products Edition P 1
AECMA PREN 2346-003-1997 Aerospace Series Cable, Electrical, Fire Resistant Part 003: Standard Version Product Standard Supersedes 3E: 08/96
AECMA PREN 4300-1998 Aerospace Series Identification Marking of Engine Items Design Standard Edition P 1
AECMA PREN 4617-2004 Aerospace series Recommended practices for standardising company standards Edition P 1
AECMA PREN 4300-1996 Aerospace Series Identification Marking of Engine Items Design Standard Edition P1
AECMA PREN 4618-2004 Aerospace series Aircraft internal air quality standards, criteria and determination methods Edition P 1
AECMA PREN 4445-2000 Aerospace Series Nuts, Elliptical Clinch, Self-Locking Design Standard Edition P 1
AECMA PREN 2003-13-1986 Aerospace Series Test Methods for Steel Products Part 13 - Macrographic Examination by Sulphur Print (Baumann Method) Issue P 1
AECMA PREN 3145-1995 Aerospace Series Round Bars with Normal Tolerances Hot Formed, in Steel Diameter 6 mm Less Than or Equal to D Less Than or Equal to 250 mm Dimensions Edition P 1
AECMA PREN 4014-2000 Aerospace Series Inserts, Thickwall, Self-Locking Design Standard Edition P 1
AECMA PREN 4385-2001 Aerospace Series Non-Metallic Materials General Organisation of Standardisation Links between Types of Standards Edition P 2
AECMA PREN 9133-2002 Aerospace series Quality management systems Qualification Procedure for Aerospace Standard Parts Edition P 1; Supersedes EN 3042: 1991 [Replaced: ASD-STAN PREN 3042]
AECMA PREN 8.6013-2001 Aerospace Series Qualification Procedure for Aerospace Products Edition P1
AECMA TR 2410-1996 Aerospace Metallic Materials Cross-Reference Between Dimensional Standards and Material Standards Aerospace Series Metallic Materials Relationship Between Dimensional Standards and Material Standards Serie aerospatiale Materiaux Metalliques Co

CEN - European Committee for Standardization

EN 9133:2018 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products

ES-AENOR

UNE 28-639-1988 Aerospace series. A6 microfilm computer print

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 127-1963 STANDARD FOR AEROSPACE EQUIPMENT VOLTAGE AND FREQUENCY RATINGS

KR-KS

KS W ISO 5843-6-2018 Aerospace－List of equivalent terms－Part 6：Standard atmosphere
KS W ISO 5843-6-2018(2023) Aerospace－List of equivalent terms－Part 6：Standard atmosphere

GSO

OS GSO ISO 5843-6:2016 Aerospace -- List of equivalent terms -- Part 6: Standard atmosphere
GSO ISO 5843-6:2016 Aerospace -- List of equivalent terms -- Part 6: Standard atmosphere
BH GSO ISO 5843-6:2017 Aerospace -- List of equivalent terms -- Part 6: Standard atmosphere

AT-ON

OENORM EN 9114-2021 Aerospace series - Quality systems - Direct Ship - Guidance for Aerospace Companies

US-CFR-file

CFR 14-35.15-2013 Aeronautics and Space. Part35:Airworthiness standards: propellers. Section35.15:Safety analysis.

Institute of Electrical and Electronics Engineers (IEEE)

IEEE No 127 IEEE Standard for Aerospace Equipment Voltage and Frequency Ratings

GB-REG

REG NASA-LLIS-0807--2000 Lessons Learned ?Penetrant Testing of Aerospace Materials
REG NASA-LLIS-0760-2000 Lessons Learned ?Eddy Current Testing of Aerospace Materials

Others: aerospace standard sae,Standard test method for hail impact resistance of transparent enclosures for aerospace applications